• The Korean Journal of Ecology
• /
• v.15 no.1
• /
• pp.47-58
• /
• 1992

This study is to investigate the change of the seasonal patterns of relative water relations parameters by the pressure-volume curves in pinus koraiensis needles. The osmotic potentials at full water saturated(Ψ0, sat) and at incipient plasmolysis(Ψ0, tlp) increased in growing season, while decreased in non-growing season. The maximum bulk modulus of elasticity(Emax), relative water content(RWCTLP), and relativefree water content(FWCtlp) at incipient plasmolysis in non-growing season were higher than these of growing season. The maximum pressure potential(Ψp, max) varied from 1.16 to 2.18MPa, torgor index(TI) varied from 3.1 to 4.7. The osmole number(Ns/dw) and symplastic water (Vo/DW) were variable seasonally. The maximum water content(Vt/DW) and apoplastic water(AW) were relatively high in early growing stage, and then decreased to needle aging. The pressure potential(Ψp) and water potential(Ψ) in winter needles were rapidly decreased with decreasing of relative water content. The matric potential occupied over 10 percent of water potential with less than-2.0 MPa.

• Journal of the Korean Ceramic Society
• /
• v.29 no.8
• /
• pp.660-666
• /
• 1992

Pitchstone reacted with CaO in hot water(9$0^{\circ}C$) and increased its sedimentary volume by forming Ca(OH)2 and calcium silicate hydrates. ALC was prepared from gel at 9$0^{\circ}C$ and subsequently autoclaved at 18$0^{\circ}C$ by using the property of swelling and the physical properties of ALC was investigated with experimental conditions. When the ratio of pitchstone/CaO was 2 (CaO/SiO2 mol ratio=0.81), bulk density, modulus of rupture and thermal conductivity of the ALC were 0.75g/㎤, 73kg/$\textrm{cm}^2$ 0.150 kcal/m.hr.$^{\circ}C$, respectively. The crystalline phase of it was mainly tobermorite. Therefore ALC was turned out to be much lightweighted and good thermal insulation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.142-142
• /
• 2000

We performed a total energy calculation of clean alumunum surfaces of three low indices based on a density functional theory with a local density approximation, using the Ceperly-Alder exhange correlation parametrized by Perdew and Zunger. Pseudopotentials were generated for Al of which the plane wave cut-off was 15Ry. We used Gaussian broadening of a Fermi level to accelerate the convergence of our calculation with the Gaussian energy smearing parameter of 0.005Ry. First, we determine the lattice constant of the aluminum of an face-centered-cubic structure to be 3.96 which is comparable to the experimental data of 4.05 . The cohesive energy of 4.20eV/atom and the bulk modulus of 0.775$\times$1012dyne/cm2 are also comparable to the experimental values of 3.39eV/atom and 0.772$\times$1012dyne/cm2, respectively. Then we investigated the surface relaxation of (100), (110) and (111) surfaces using a 9-layer slab separated by 6-layer thick vacuum. The results are consistent with the existing experimental results.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.1
• /
• pp.45-50
• /
• 1985

The glass transition temperature, dynamic shear moduli, and bulk viscosities of PVC, filled with nickel particles, were investigated. The glass temperature of the composite increased with increasing filler concentration. The data were interpreted by assuming that the interaction between filler particles and the polymer matrix reduces molecular mobility and flexibility of the polymer chains in the vicinity of the interfaces. The relative modulus for the PVC/Ni composite system followed the Kerner equation. The relative viscosities were strongly temperature dependent and did not agree with the conventional viscosity predictions for suspensions. It is suggested that the filler has a twofold effect on the viscosity of the composite materials; one is due to its mechanical presence and the other is due to modification of part of the polymer matrix caused by interaction. This phenomenon is approximately bounded by Kerner's predictions for suspensions.

• Steel and Composite Structures
• /
• v.48 no.3
• /
• pp.293-303
• /
• 2023

In this paper, geometrically nonlinear free vibration analysis of Mindlin viscoelastic plates with various geometrical and material properties is studied based on the Von-Karman assumptions. A novel solution is proposed in which the nonlinear frequencies of time-dependent plates are predicted according to the nonlinear frequencies of plates not dependent on time. This method greatly reduces the cost of calculations. The viscoelastic properties obey the Boltzmann integral law with constant bulk modulus. The SHPC meshfree method is employed for spatial discretization. The Laplace transformation is used to convert equations from the time domain to the Laplace domain and vice versa. Solving the nonlinear complex eigenvalue problem in the Laplace-Carson domain numerically, the nonlinear frequencies, the nonlinear viscous damping frequencies, and the nonlinear damping ratios are verified and calculated for rectangular, skew, trapezoidal and circular plates with different boundary conditions and different material properties.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.8
• /
• pp.122-130
• /
• 1995

To reduce the shock in shifting, the clutches and the brakes in automatic transmission have to be connected smoothly and disconnected rapidly. It is PCSV(Pressure Control Solenoid Valve) that paly this role of automatic transmission. In this paper, there were two steps in the analysis of the PCSV. The first step was modeling the elctromagnet by the permeance method. The second step was modeling the hydraulic circuit by the pressure differential equa- tion. In addition to this modeling, a experiment was performed and the commercial package program was used in order to justify modeling. The result of modeling coincide with the result of experiment and commercial package program. As a result, this modeling is usable in analysis of dynamic characteristics of the PCSV.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.8
• /
• pp.120-127
• /
• 1996

Anti-lock Brake System has been developed to reduce tendency for wheel lock and improve vehicle control during sudden braking on slippery road surfaces. This is achieved by controlling the braking pressure, avoiding wheel lock, while retaining handling and brake performance. This paper is concerned about pressurecharacteristics of hydraulic modulator. Experimental sets which is consists of hydraulic modulator, duty controller, pressure regulator, pressure senset is consuructed. System modelling and computer simulation are performed for comparison with experimental results. Brake wheel pressure are measured under various driving pulse. The result of experiment show fairly agreement with the simulation. As a result, it is known that wheel pressure is affected by duty ratio, orifice diameter through computer simulation.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.4 s.46
• /
• pp.249-257
• /
• 2005

Garnet is one of the major minerals down to the top of lower mantle approximately 660 km with spinel and pyroxenes. Garnet transforms into perovskite and corundum in the lower mantle, however its sequence is still in controversy. We measured the compressibility of a natural almandine at high-pressure up to 62 CPa using Mao-Bell type diamond anvil cell (DAC) at room temperature. Chemical formula of the specimen is ($Fe_{2.52}Ca_{0.21}Mg_{0.18}Mn_{0.12})Al_{2.23}Si_{2.97}O_{12}$. Results of this compression study are as follows: a : $10.175\;{\AA}$, V : $1251.16\;{\AA}^{3}$, $D_{x}$ : $5.265\;g/cm^{3}$ at 62 GPa; bulk modulus is 156 GPa using Birch-Murnaghan equation of state (EoS) with a fixed $K_{0}\;'$ of 4. This study would be the first time attempt accomplished with the high pressure DAC using synchrotron radiation at the Pohang Light Source (PLS) in Korea.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1603-1610
• /
• 2012

The effects of moisture content on the physical properties of cereal extrudates were investigated. Cereal flours (rice, wheat, corn, barley, and oat) were extruded at a barrel temperature of $130^{\circ}C$, feed rate of 120 g/min, and various moisture contents (20, 22.5, 25, 27.5, and 30%). Proximate content, expansion index, specific length, bulk density, breaking strength, apparent elastic modulus, water absorption index (WAI), water solubility index (WSI), specific mechanical energy (SME) input, paste viscosity, and color values were analyzed. Expansion ratio of extruded corn flour was higher than that of other extrudates at low moisture content. Bulk density, specific length, and elastic modulus in all cereals decreased with an increase in moisture content. The WAI increased with an increase in moisture content, whereas WSI decreased. SME input of extruded corn flour was higher than those of other cereal flours at lower moisture content, whereas that of oat flour extrudate was lower than those of other cereals at higher moisture content. Lightness of extruded rice flour was lighter than those of other cereals while that of extruded barley flour was darker.

• Journal of the Korean Magnetics Society
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2013

Spin-orbit coupling (SOC) effect is known to be the physical origin for various exotic magnetic phenomena in the low-dimensional systems. Recently, SOC also draws lots of attention in the study on magnetically doped thermoelectric alloys to determine their properties as the thermoelectric application as well as the topological insulator via the exact electronic structures determination near the Fermi level. In this research, aiming to investigate the spin-orbit coupling effect on the structural properties such as the lattice constants and the bulk modulus of the most widely investigated thermoelectric host material, $Bi_2Te_3$, we carried out the first-principles electronic structure calculation using the all-electron FLAPW (full-potential linearized augmented plane-wave) method. Employing both the local density approximation (LDA) and the generalized gradient approximation (GGA), the structural optimization is achieved by varying the in-plane lattice constant fixing the perpendicular lattice constant and vice versa, to find that the SOC effect increases the equilibrium lattices slightly in both directions while it markedly reduces the bulk modulus value implying the strong orientational dependence, which are attributed to the material's intrinsic structural anisotropy.