• Korean Journal of Plant Resources
• /
• v.19 no.3
• /
• pp.432-435
• /
• 2006

A rapid and mass propagation method for multiple shoots and plant regeneration using bulb scales of Muscari comosum var. plumosum were developed. In vitro different parts of bulb scale as explants were cultured on 11 kinds of MS (1962) media supplemented with various plant growth regulators to induce shoot and callus. A combination of 2.0 mg/L 6-BA and 2.0 mg/L IBA on MS medium was the most favorable and induced the highest production (80%) of shoot formation after 30 days. We also found that the middle part of bulb scale was the best for mass propagation of Muscari comosum var. plumosum of which production could reach 64.4%.

• Journal of the Korean Chemical Society
• /
• v.16 no.2
• /
• pp.106-116
• /
• 1972

The universality of the pseudo wet bulb temperature has been established in the drying of macroporous inerts, microporous inerts, and microporous swellable materials using water and methyl alcohol as the liquids. The pseudo wet bulb temperature is a new constant temperature intermediate between the wet bulb and dry bulb temperatures of the air during the second falling rate period. This temperature is calculated from consideration of the heat transfer to, and vapor diffusion from, liquid evaporating at the liquid-air boundary. The experimental results agree with that calculated from the equation proposed by Nissan, Bolles and George.

• Imaging Science in Dentistry
• /
• v.49 no.3
• /
• pp.251-256
• /
• 2019

Jugular bulb diverticulum is an irregular extension of the jugular bulb into the temporal bone that may be symptomatic or asymptomatic. The jugular bulb has rarely been reported to extend into the occipital condyle; such extension is termed a condylar jugular diverticulum and is characterized as a defect in the occipital condyle contiguous with the jugular bulb. This report details 3 cases of condylar jugular diverticulum. Extension of the jugular bulb into the ipsilateral occipital condyle was noted as an incidental finding on cone-beam computed tomographic (CBCT) images of 3 patients. All 3 patients were asymptomatic, and this finding was unrelated to the initial area of interest. CBCT use is becoming ubiquitous in dentistry, as it allows 3-dimensional evaluation, unlike conventional radiography. Proper interpretation of the entire CBCT is essential, and recognition of the indicators of condylar jugular diverticulum may prevent misdiagnosis of this rare entity.

• The Plant Pathology Journal
• /
• v.24 no.1
• /
• pp.90-92
• /
• 2008

In 2007, a bulb rot of Allium victorialis var. platyphyllum Makino caused by Sclerotium rolfsii occurred sporadically in a herb farm at Gyeongsangnam-do, Korea. The symptom initiated with water-soaking lesion and progressed into bulb rot and wilt of a whole plant. Severely infected plants were blighted and killed eventually. White mycelial mats appeared on the lesion at early stage and a number of sclerotia were formed on the bulb. The sclerotia were spherical, $1{\sim}3 mm$ and white to brown. The optimum temperature for the growth and sclerotia formation was $30^{\circ}C$ on PDA. The hyphal width was measured $4-9{\mu}m$. The typical clamp connections were observed on PDA. Based on the symptom, mycological characteristics and pathogenicity to the host plant, this fungus was identified as Sclerotium rolfsii Saccardo. This is the first report on the bulb rot of A. victorialis var. platyphyllum caused by S. rolfsii in Korea.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.6
• /
• pp.303-308
• /
• 2005

In this paper, the acoustic properties of the light bulb are presented based on a new light bulb source system of continuously transmitting implosive signal . We describe the results of analysis of bulb signals and comparison with Previous works. The results show that Peak-source-level and Primary resonant frequency are increasing with increasing source depth. This bulb source can be used for the purpose of geoacoustic parameter inversion and source tracking in sha]low water via matched field processing.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.144-147
• /
• 2008

A glass bulb is the most reliable and simplest device for a fire sprinkler head system. We had developed an accurate glass bulb. The glass bulb is composed with a glass ampoule, liquid filled within the ampoule and an air bubble in the liquid. The first step of the development was to establish a stable mass production system for uniform glass ampoule. The second step is to optimize the composition of the liquid and the size of the bubble. It was also a difficult problem to devise manufacturing process to form uniform bubble size. The final step for the development is to control the mechanics for glass breaking by surface treatment for the glass bulb.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.2
• /
• pp.169-177
• /
• 2018

Twisted rudder, twisted rudder with bulb, and twisted rudder with bulb and fin have been developed computationally for 3,000 TEU container ship through parametric study. The objective function is to minimize delivered power in model scale. Design variables are twisted angle, rudder bulb diameter and fin angle. The governing equation is Reynolds averaged Navier-Stokes equations in an unsteady turbulent flow and the Reynolds stress model applied for the turbulent closure. A double body model is used for the treatment of free-surface. The calculation was carried out in towing and self-propulsion conditions at design speed. The sliding mesh technique was employed to simulate the flow around the propeller. Form factor is obtained from the towing computation. Self-propulsion point is obtained from the self-propelled computations at two propeller rotating speeds. The delivered power due to the designed twisted rudder, twisted rudder with bulb, and twisted rudder with bulb and fin are reduced by 1.1%, 1.6%, and 2.0%, respectively.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.4
• /
• pp.321-329
• /
• 2018

A study was carried out to determine the influence of climatic environments on the growth characteristics and bulb quality of extremely early-maturing type onion grown at different altitudes, such as 60m, 200m, 350m and 700m above sea level (ASL). The mean air temperature during the growing season of extremely early-maturing type onion (October 18 to April 27) was $10.8^{\circ}C$, $9.6^{\circ}C$, $8.1^{\circ}C$ and $6.1^{\circ}C$ at 60m, 200m, 350m and 700m ASL. The mean air temperature during the bulb growth period (March 16 to April 14) was recorded $10.5^{\circ}C$, $9.4^{\circ}C$, $7.9^{\circ}C$ and $6.0^{\circ}C$ at 60m, 200m, 350m and 700 m ASL. Plant height, neck diameter, leaf number, leaf area, top fresh weight and top dry weight were significantly increased in growing of extremely early-maturing type onion at 60m ASL. Bulb/neck diameter ratio increased rapidly under the same temperature regime. The diameter and weight of the bulb were also the largest at 60m ASL during the bulb growth period (daily mean temperature of $12.5^{\circ}C$). At 60m ASL, there was the highest bulb size like a height, diameter and weight of bulb related directly on onion yield in the bulb growth period from March 16 to April 14. In contrast, yield and bulb quality were considerably decreased at 700m ASL during the bulb growth stage (daily mean temperature of $8.4^{\circ}C$). The quantity of extremely early-maturing type onion has gradually decreased as the daily average temperature drops below $12.5^{\circ}C$ during the bulb growth stage (March 16 to April 14). As a result, the lower temperature (daily mean temperature below $12.5^{\circ}C$) during the bulb growth stage significantly decreased the size and quantity of bulb in direction proportion.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.123-128
• /
• 2004

This study was conducted to investigate the effects of bulb size (10, 15, 20, 25 cm) on growth and yield characteristics of edible canna in Jeju region from 20 May to 24 Nov. 2003. The results obtained were summarized as follows; Plant height grew big 78.8~129.1 cm as bulb size increased 10~25 cm. Leaf length, leaf width, number of leaves, tillers and bulb per plant and stem diameter were the same trend with plant height response. Fresh matter yield increased 29.0~91.1 MT/ha as bulb size increased from 10 to 25 cm. Fresh weight of above-ground part and bulb yield were the same trend with fresh matter yield.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.197-201
• /
• 2011

This study was carried out to investigate cut flower quality bulb circumference and cultivars affecting 7 different cultivars to produce high quality cut flower lilies. To determine the effects of bulb circumference on growth and cut flower quality of 7 different cultivars, Lilium oriental hybrid 'Chilli', 'Ismael', 'Medusa', 'Mother's Choice', 'Siberia', 'Sorbonne', and 'Yelloween' were tested. After cut flower quality experiment, the highest 1st flower bud length and cut flower height were 'Medusa' and 'Mother's Choice' respectively. Most plants had over $30^{\circ}$ stem bending angle except for 'Mother's Choice', and 'Ismael'. The study shows that the bigger bulb circumference has the better 1st peduncle diameter, inflorescence length, stem diameter, number of flowers, and fresh weight. Bulb circumference affects the 1st flower bud length, cut flower height and number of flowers. Stem bending angle, however, is affected by neither bulb circumference nor cultivar. In conclusion, growth, cut flower quality and vase life were affected by the bulb circumference rather than cultivar.