• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1107-1112
• /
• 2009

To design and build a deformed building, new approaches and technologies are required, in which a design approach with parametric and generative technology is used for design and for building it, computer based fabrication technology. Even if parametric design technology is not a state of the art thing, the technology is still used widely, in order to effect the efficiency and furthermore it will continue to be innovated upon continuously. To cope with the limitation of it, the generative design system is developed. Deformed building design requires new methodology to overcome the limitations of conventional ways, which have difficulties to create enough design alternatives to explore satisfied design solutions order to deformed design have geometrical complexity and dramatically increased amount of data. Hence the generative design system can be a cutting edge methodology to solve it. However we should consider how to build the design in the real world. For this, the computer based fabrication technology which is used in mechanical industry is required to introduce to architecture and construction domain for efficiency. In this research, the methodology is modeled and tested with Bezier surface based shell structure.

• Advances in Energy Research
• /
• v.1 no.1
• /
• pp.79-95
• /
• 2013

The purpose of this paper is to investigate the surface temperatures of the shelter of three public buildings in the city of Xanthi, in northern Greece. The buildings were built in different time periods and consequently they have different technical characteristics. Respectively, we survey the three following buildings that have been built in 1880 (Municipality Hall of Xanthi), in 1970 (Municipality Amphitheatre) and in 2002 (Bank offices building). Data have been gathered by the use of thermal camera and the survey has been conducted from January up to July. The data gathered regard measurements of the surface temperature of the exterior walls of the shelters, both inside and outside. The study aims at the evaluation of the thermal behavior of the shelter of buildings, which built in different time and under different regulations. The gathered data of the surface temperatures compare the different thermal behavior of the shelter. The analysis of the results and diagrams show that the thick masonry of the traditional Municipality Hall offers an insulation that is adequate. The building of 1970, which was constructed with the previous buildings regulation, has thermal losses due to inadequate insulation. The new building of 2002 has low thermal losses.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.38-47
• /
• 2010

The purpose of this study is to examine the characteristics by design component elements of the facade in elementary school buildings after the 7th educational curriculum. This study choose twenty five elementary school as the subjects of the study. And among many elevations of building, an elevation that is alongside of the schoolyard is chosen because this elevation has the highest visual influence on passers-by. To begin with, this elevation is divided into the roof and the surface of a wall, The roof is divided into roof styles, existence of roof and materials. The surface of a wall is divided into design principles(balance, contrast, rhythm), the formal organization(basic elements and form, and transformation of form), the ornamental composition, materials and colors. The results of the research are summarized as follows: First of all, motifs of classical architecture were well expressed in this period and postmodern tendency had been shown until 2005. After Build Transfer Lease(BTL), however, tendency of classical architecture, contrast by the size of the form and base element by point disappeared. Instead, asymmetrical and flat tendency is expressed. Also, emphasized design of the building elevation appear by basic colors of Munsell, not motifs of classical architecture.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.351-354
• /
• 1998

In this paper, we measured inter-floor loss in multifloored building to surround buildings at 910MHz. Effect of interfloor diffraction to propagate through out-surface were smaller than effect of reflection of surrounding buildings. If multifloored building were offered W-PBX service, we will have to design optimization of indoor cell to overcome time delay difference.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.168-173
• /
• 2000

Design of experiments is utilized for exploring the design space and for building response surface models in order to facilitate the effective solution of multi-objective optimization problems. Response surface models provide an efficient means to rapidly model the trade-off among many conflicting goals. In robust design, it is important not only to achieve robust design objectives but also to maintain the robustness of design feasibility under the effects of variations, called uncertainties. However, the evaluation of feasibility robustness often needs a computationally intensive process. To reduce the computational burden associated with the probabilistic feasibility evaluation, the first-order Taylor series expansions are used to derive individual mean and variance of constraints. For robust design applications, these constraint response surface models are used efficiently and effectively to calculate variances of constraints due to uncertainties. Robust optimization of automotive seat is used to illustrate the approach.

• Advances in concrete construction
• /
• v.16 no.3
• /
• pp.155-167
• /
• 2023

The penetrated chloride in concrete has different behavior with mix proportions and local exposure conditions, even in the same environments, so that it is very important to quantify surface chloride contents for durability design. As well known, the surface chloride content which is a key parameter like external loading in structural safety design increases with exposure period. In this study, concrete samples containing OPC (Ordinary Portland Cement), GGBFS (Ground Granulated Blast Furnace Slag), and FA (Fly Ash) had been exposed to submerged, tidal, and splash area for 5 years, then the surface chloride contents changing with exposure period were evaluated. The surface chloride contents were obtained from the chloride profile based on the Fick's 2nd Law, and the regression analysis for them was performed with exponential and square root function. After exposure period of 5 years in submerged and tidal area conditions, the surface chloride content of OPC concrete increased to 6.4 kg/m³ - 7.3 kg/m³, and the surface chloride content of GGBFS concrete was evaluated as 7.3 kg/m³ - 11.5 kg/m³. In the higher replacement ratio of GGBFS, the higher surface chloride contents were evaluated. The surface chloride content in FA concrete showed a range of 6.7 kg/m³ to 9.9 kg/m³, which was the intermediate level of OPC and GGBFS concrete. In the case of splash area, the surface chloride contents in all specimens were from 0.59 kg/m³ to 0.75 kg/m³, which was the lowest of all exposure conditions. Experimental constants available for durability design of chloride ingress were derived through regression analysis over exposure period. In the concrete with GGBFS replacement ratio of 50%, the increase rate of surface chloride contents decreased rapidly as the water to binder ratio increased.

• Korean Institute of Interior Design Journal
• /
• v.20 no.6
• /
• pp.218-227
• /
• 2011

Korean commercial architecture is based on two distinctive characteristics of western modern architecture: grid frame structure and free facade. However, the original facade of the building disappears as numbers of commercial advertisements and signboards representing inner programs cover up the original facade. This is a unique feature of commercial architecture in Korea which I would call the surface phenomena of Korean commercial architecture. Common criticism on this type of building is that too many and too big signboards infringe upon the original pure facade of the architecture. Underlying assumption here is that signboards and commercial ads are inessential and decorative elements simply attached to the original pure facade of modern architecture. However, in this paper, I argue that commercial decorations is an essential aspect of korean commercial architecture rather than an inessential decorative element attached later to the essential facade of architecture and that it reflects the historical specificity of cultural and architectural modernity of Korea And thus, the surface phenomena of Korean commercial architecture should not be judged based upon the aesthetic paradigms of either western modern or postmodern architecture. Rather, it can be argued that surface phenomena of Korean commercial architecture is a reflection of a modernity beyond the paradigm of western modernism and postmodernism. The agenda of Korean commercial architecture is then not simply to restrict or to control signboards on the building facades with the intention to clean up facade of the building but rather to integrate the signs and commercial ads with the structure of architectural surface.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.77-80
• /
• 2009

Because buildings which apply color that is various to concrete recently are introduced, value as design element of building is rising gradually in townscape. Even if expense is increased according as importance of concrete that have variety of design because do such social background and connection is emphasized, development of color concrete is pressing. Therefore, in this research, examined concrete physical & chemical characteristics by use of acid agent as part of research to embody diverse surface color of cement material. Here, embodiment of various color by unique color that stained hydrate has as that Color Concrete forms stained oxide that react with hydrate within concrete spreading stained agent that contain acid and metallic-ion in matrix that have cement ingredient on the surface is available.

• International Journal of High-Rise Buildings
• /
• v.4 no.1
• /
• pp.85-90
• /
• 2015

Advances in the technology of computational design are giving architects and engineers the opportunity to analyze buildings with complex geometries. This study explores the optimization and automation process using the parametric design method, and uses digital tools to achieve surface representation and panelization for curved shaped office buildings. In this paper, we propose parametric algorithms of dimensional and geometric constraints using the Knowledge-ware scripts embedded in Gehry Technologies' Digital Project. The knowledge-based design methods proposed in this study can be used to systemize the knowledge possessed by experts in the form of data. Such knowledge is required to promote collaboration between designers and engineers in the process of CAD/CAE/CAM. The aim of this study is to integrate the process into design, which establishes an integrated process. This integration enables two-way feedback between design and construction data by combining the methods used in designing, engineering, and construction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.677-685
• /
• 2014

Despite the significant benefits of BIM (Building Information Modeling), it is not being vitalized for the facilities that are designed based on the horizontal and vertical alignments because of the lack of flexibility in manipulating surface models generated based on alignments. Alignment-based design produces a surface model in one piece through the definition of the typical cross-section along the alignment. Therefore, linking these alignment-based 3D surface models, that are not modularized and difficult to partition, to the required attribute information is very difficult This paper presents design of a flexible BIM technology suitable for the alignment-based civil infrastructure by providing the partitioning functionality for surface models, the contents library for cross-sectional design components, and the attribute information along with the critical functionalities needed for the design, construction and maintenance of alignment-based civil infrastructure.