• Journal of KIBIM
• /
• v.13 no.2
• /
• pp.1-15
• /
• 2023

Since the 1960s, the Korean Peninsula, which consists of 77.4 of the country's land and mountains, has seen a surge in demand for buildings due to population concentration due to urbanization and industrialization. Since then, the development of slopes has been inevitable due to the concentration and expansion of the city's population. When building a building on a slope, it is important to set the height of the surface. In this case, the means of regulating buildings in construction-related laws, such as the building closure ratio, floor area ratio, number of floors and total floor area of buildings, have an overall effect on buildings through the height of the surface. In the Korean Building Act, the setting of the height of the ground affects the calculation of the building height limit standard and the calculation of the underground floor, and it takes a long time to calculate. Therefore, the time required for attempts to change various design plans of buildings increases. The purpose of this study is to speed up the time required to calculate the weighted average of the surface when constructing buildings on slopes. In addition, the existing calculation process allows various design attempts compared to the same time given.

• Journal of KIBIM
• /
• v.8 no.4
• /
• pp.23-33
• /
• 2018

Recently, the industry actively adopts the cutting-edge technologies of the fourth industrial revolution and uses them to enhance the productivity and service of mass-customization. The manufacturing industry is creating new processes and business models by achieving digital transformations through a lean start-up approach aimed at achieving the highest customer satisfaction with minimal resources. Although attempts are made to manufacture the building by introducing the latest technology in architecture, it is applied sporadically, not as an integrated system, in the entire phase of the architectural project. This paper analyzes the changes in the construction industry through the application of core technologies of the fourth industrial revolution. Design processes are analyzed for the digital transformation of the construction industry by case study of advanced architectural design practice. A novel design concept model 'Architectural lean startup' is proposed by combining the architectural process and the lean start up method. Through the design of the bus stop based on the architectural lean startup concept, it is confirmed that the designer repeats the 'Generate-Test-Analysis' to develop the design and generate the final result.

• Journal of KIBIM
• /
• v.11 no.2
• /
• pp.54-59
• /
• 2021

In the process of designing a building, the process of expressing the designer's ideas through images is essential. However, it is expensive and time consuming for a designer to analyze every individual case image to generate a hypothetical design. This study aims to visualize the basic design draft sketch made by the designer as a real image using the Generative Adversarial Network (GAN) based on the continuously accumulated architectural case images. Through this, we proposed a method to build an automated visualization environment using artificial intelligence and to visualize the architectural idea conceived by the designer in the architectural planning stage faster and cheaper than in the past. This study was conducted using approximately 20,000 images. In our study, the GAN algorithm allowed us to represent primary materials and shades within 2 seconds, but lacked accuracy in material and shading representation. We plan to add image data in the future to address this in a follow-up study.

• Journal of KIBIM
• /
• v.14 no.2
• /
• pp.13-24
• /
• 2024

This research suggests a novel visualization approach utilizing Generative AI to render photorealistic architectural alternatives images in the early design phase. Photorealistic rendering intuitively describes alternatives and facilitates clear communication between stakeholders. Nevertheless, the conventional rendering process, utilizing 3D modelling and rendering engines, demands sophisticate model and processing time. In this context, the paper suggests a rendering approach employing the text-to-image method aimed at generating a broader range of intuitive and relevant reference images. Additionally, it employs an Text-to-Image method focused on producing a diverse array of alternatives reflecting architects' styles when visualizing the exteriors of residential buildings from the mass model images. To achieve this, fine-tuning for architects' styles was conducted using the Low-Rank Adaptation (LoRA) method. This approach, supported by fine-tuned models, allows not only single style-applied alternatives, but also the fusion of two or more styles to generate new alternatives. Using the proposed approach, we generated more than 15,000 meaningful images, with each image taking only about 5 seconds to produce. This demonstrates that the Generative AI-based visualization approach significantly reduces the labour and time required in conventional visualization processes, holding significant potential for transforming abstract ideas into tangible images, even in the early stages of design.

• Journal of KIBIM
• /
• v.9 no.2
• /
• pp.29-44
• /
• 2019

This paper is to explore examples of complementary use of digital and physical models. The reason for this is to suggest a method for commercializing architectural design considering high technology. These cases are the practical and educational environment in which design processes based on digital computation technology are performed. Also, in this environment, analog design media (eg, physical models) still being used in the design process using digital computing. Indeed, in this environment, designers are exploiting digital and physical models to address the types of risks that can be discovered when designs are implemented and these risks. By analyzing these cases, we define the roles of digital and physical models to visualize and resolve risks. This paper focuses on one of method as "prototyping", which is used in the field of machinery and is a difficult method to carry out in the conventional design process. In particular, designers look for benefits that encourage designers in utilizing current digital computation technologies (eg, parametric design, simulation, building information models, and digital fabrication). Among the roles of the physical model, roles that can not be replaced by the digital model are explored. It is clear that this case-based study has difficulty in generalizing the design method. However, it helps the designers of today's practical and educational environment to verify and design the actual details of construction and operation when applying and developing unfamiliar materials and methods in the field of architecture.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.3
• /
• pp.63-73
• /
• 2017

In contemporary society, it is increasingly common to spend more time indoors. As such, there is a continually growing desire to build comfortable and safe indoor environments. Along with this trend, however, there are some serious indoor-environment challenges, such as the quality of indoor air and Sick House Syndrome. To address these concerns the government implements various systems to supervise and manage indoor environments. For example, green building certification is now compulsory for public buildings. There are three categories of green building certification related to indoor air in Korea: Health-Friendly Housing Construction Standards, Green Standard for Energy & Environmental Design(G-SEED), and Indoor Air Certification. The first two types of certification, Health-Friendly Housing Construction Standards and G-SEED, evaluate data in a drawing plan. In comparison, the Indoor Air Certification evaluates measured data. The certification using data from a drawing requires a considerable amount of time compared to other work. A 2D tool needs to be employed to measure the area manually. Thus, this study proposes an automatic assessment process using a Building Information Modeling(BIM) model based on 3D data. This process, using open source Industry Foundation Classes(IFC), exports data for the certification system, and extracts the data to create an Excel sheet for the certification. This is expected to improve the work process and reduce the workload associated with evaluating indoor air conditions.

• Journal of KIBIM
• /
• v.5 no.1
• /
• pp.54-62
• /
• 2015

The Cities that recently developed have been applied to private network for establishing information communication network system. The local governments planning or pursuing U-City construction should also choose the private network in consideration of operation and maintenance. In viewpoint of agency operating u-City, it is necessary to integrate traditional and new network. However, there has been lack of guides to choose U-City network considering the economic analysis between private and leased network. This study analyzed the characteristics of private and leased network, and the cost-benefit by estimating the network cost and communication demand focused on U-services that are recently applied. This study purpose a guide for efficient U-City information network selected by estimating ROI(Return On Investment) and BEP(Break Even Point) for establishing private and leased network.

• Journal of KIBIM
• /
• v.5 no.1
• /
• pp.8-15
• /
• 2015

With the emergence of environment-friendly paradigms, many countries around the world have enacted various laws to take care of environmental pollution-related problems. The goal of these environmental laws and regulations was to properly respond to rapid environmental pollution. Because of the simultaneous enactment of these laws on diverse pollution sources, however, a variety of problems, including an unclear correlation among these laws, have occurred. As a result, workers have found it hard to collect and use the related laws and regulations. Therefore, this study proposes a metadata-based information retrieval method for the efficient search of environment-friendly laws and regulations. The laws and regulations were structured using metadata from users, business stage, topic and department. These were obtained through semantic analysis on environment-friendly laws and regulations, and then an intelligent retrieval approach was utilized. To verify the retrieval plan, a test case was conducted, and improvement in retrieval accuracy against the conventional system was confirmed. It appears that the proposed plan will improve productivity in the construction industry by improving accuracy in retrieving environment-friendly laws and regulations.

• Land and Housing Review
• /
• v.11 no.3
• /
• pp.93-101
• /
• 2020

Recently, as a BIM-based construction simulation system, 4D CAD tools using virtual reality (VR) objects are being applied in construction project. In such a system, since the expression of the object is based on VR image, it has a sense of separation from the real environment, thus limiting the use of field engineers. For this reason, there are increasing cases of applying augmented reality (AR) technology to reduce the sense of separation from the field and express realistic VR objects. This study attempts to develop a methodology and BIM module for the pre-construction verification system using AR technology to increase the practical utility of VR-based BIM objects. To this end, authors develop an AR-based drawing verification function and drawing object-based 4D model augmentation function that can increase the practical utility of 2D drawings, and verify the applicability of the system by performing case analysis. Since VR object-based image has a problem of low realism to field engineers, the linking technology between AR object and 4D model is expected to contribute to the expansion of the use of 4D CADsystem in the construction project.

• Journal of KIBIM
• /
• v.11 no.3
• /
• pp.34-44
• /
• 2021

This study quantitatively analyzes the work performance of the structural safety diagnosis team that diagnoses pipe racks. To this end, a method for evaluating the performance of the structural safety diagnosis team using the queuing model was proposed. For verification, the case of applying the existing method and the method of introducing a 3D laser scanner for one site was used. The period, number of people, and initial investment cost of each project were collected through interviews with case project experts. As a result of analyzing the performance of the structural safety diagnosis team using the queuing model, it was possible to confirm the probability of delay in the work of each project and the amount of delayed work. Through this, the cost (standby cost) when the project was delayed was analyzed. Finally, economic analysis was conducted in consideration of the waiting cost, labor cost, and initial investment cost. The results of this study can be used to decide whether to introduce 3D laser scanners.