• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10a
• /
• pp.376-378
• /
• 1999

공간 데이터 수집과정을 통해 제작된 수치지도는 타일 기반의 교환 포맷으로 구성되어 있다. 이러한 타일 기반의 수치지도를 이용해서 공간 데이터베이스를 구축하기 위해 먼저 타일로 분리되어 있는 수치지도를 Seamless 수치지도로 재작성해야 하며 이를 위해 타일 합병 작업이 필요하다. 타일 합병 작업을 다수의 작업자가 동시에 수행할 경우, 작업의 선후 관계에 따라 작업을 잃어 버리거나 (작업손실(Lost-Work)) 또는 동일한 엔티티들에 대해 교차 잠금이 요청되어 교착상태(DeadLock)가 발생하는 등의 문제점들이 발생한다. 이러한 문제점들을 해결하기 위해 이 논문에서는 작업자 상호간의 메시지 교환을 통한 동시 합병 작업 알고리즘을 제시하고 그에 따른 수치지도 합병 처리기를 설계 및 구현한다.

• Journal of Drive and Control
• /
• v.14 no.4
• /
• pp.17-22
• /
• 2017

In this study, the back-drivability of the single-rod and double-rod type EHAs (Electro-Hydrostatic Actuators) was compared by computer simulation and experiments. The back-drivability of EHAs exhibit non-linear behavior like their force tracking performance. In case of the double-rod type EHA, the back-drivability was mostly influenced by the bulk modulus of oil that changes with the working pressure due to entrapped air. The back-drivability of the single-rod type EHA was directly affected by the operation states of its pilot-operated check valves, while the asymmetrical piston geometry and the non-linear bulk modulus of oil also made the dynamic response in building up the cylinder pressure dependent on the operating conditions.

• Earthquakes and Structures
• /
• v.7 no.3
• /
• pp.385-400
• /
• 2014

Pounding damage to bridges and buildings is observed in most major earthquakes. The damage mainly occurs in reinforced concrete slabs, e.g. building floors and bridge decks. This study presents the results from pounding of reinforced concrete slabs. A parametric investigation was conducted involving the mass of the pendulums, the relative velocities of impact and the geometry of the contact surface. The effect of these parameters on the coefficient of restitution and peak impact acceleration is shown. In contrast to predictions from numerical force models, it was observed that peak acceleration is independent of mass. The coefficient of restitution is affected by the impact velocity, total participating mass and the mass ratio of striker and struck block.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.9
• /
• pp.171-182
• /
• 2019

Isogeometric concept is introduced to carry out free vibration analysis of plane structures. The geometry of structures is represented by using non-uniform rational B-spline surface (NURBS) and its basis function is consistently used in the formulation of plane stress element. In addition, multi-patch strategy is introduced to deal with the openings in building. The performance of the present isogeometric plane stress element is investigated by using five numerical examples. From numerical results, it is found to be that the isogeometric concept can successfully identify reliable natural frequencies and associated mode shapes of plane structures with/without openings in efficient way.

• Journal of KIBIM
• /
• v.12 no.1
• /
• pp.62-71
• /
• 2022

In order to overcome the limitations of th 2D method regardless of the client's request, the application of BIM was reviewed to create hight-quality products using 3D models and various BIM information for offshore wind jacket-type structures. First, we defined the input value through analysis of the target structure and wrote an algorithm(script library) and library to complete the BIM model. Design review using geometry information based on th BIM model, usage for visualization drawings and quantity calculation were reviewed. For the purpose of initial review, only libraries with a limited number of subjects limitations on the scope of research were used. However, in the futrue, various libraries will be developed and research will be conducted to expand the scope of subjects.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.252-259
• /
• 2017

Nowadays, the existing manual method for recording actual progress of the construction site has some drawbacks, such as great reliance on the experience of professional engineers, work-intensive, time consuming and error prone. A method integrating computer vision and BIM(Building Information Modeling) is presented for indoor automatic progress monitoring. The developed method can accurately calculate the engineering quantity of target component in the time-lapse images. Firstly, sample images of on-site target are collected for training the classifier. After the construction images are identified by edge detection and classifier, a voting algorithm based on mathematical geometry and vector operation will divide the target contour. Then, according to the camera calibration principle, the image pixel coordinates are conversed into the real world Coordinate and the real coordinates would be corrected with the help of the geometric information in BIM model. Finally, the actual engineering quantity is calculated.

• Korean Institute of Interior Design Journal
• /
• no.11
• /
• pp.57-63
• /
• 1997

In the early 20'c, scientific thoughts make a change the absolute and separate concept of space-time into relative concept of continual entity; a kind of ideal world. It suggests that the meaning of geometry as absolute truth with which has endowed human beings would changed to a relative meaning of accumulation in intellectual work on 'nature'. This cognitive changes appeared into absolute arts in 20'c like Cubism, Superematism or Constructivism. De Stijl movement which had recepted the relative concepts like Einstein's 'theory of relativity' as a developed thought from Newton-Cartesian cognition on the world. Abstration would be adequate method for expressing the dynamics and interrelationship between forms and for giving values to indivisual elements in a compositiov. This method had appeared Modern architectural form, as a common framework. The expression characteristics of geometrical design in Deconstructive and Experimental architecture were summerized in four features through the results of the analysis. First, the relation of architectural element and intertextuality is expressed in discontinuation of context and refusal of functional building. Second, the concept of trace expresses as connection of place, decomposing of excavation of trace, trace of axis, trace of fragments. Third, anti-gravity expression is there to express of open cubic, to outgrow of rectangular system, to outgrow of volume, to separate of ground connectiov. Fourth, the complex composition of abstracted geometric form is these to abstracted geometry about indefinite shape, to layer through the overlap and collage, to de-meaning and amusement of form through the pursuit of uncertainty, to indeterminate of formal meaning through operation and composition of similar form cause to the diverse of meaning.

• Journal of the Korean Society of Safety
• /
• v.30 no.6
• /
• pp.78-84
• /
• 2015

In order to increase the utilization of limited space in urban area, it can be a good solution to make use of underground space. For the last few decades, underground space systems, such as underground passages, subway stations, and underground shopping arcades, have been constructed in many cities all over the country. Despite of the advantages on the utilization of space in urban area, underground space systems have always been exposed to the risk of inundations resulted from severe rain storms. In this study, it has been examined to apply 2-D flow models (TUFLOW and FLUMEN) to establishing the preventive measures to the risk of flood. For the part with relatively complex configuration, such as a corridor junction, 2-D flow models present the detailed information about the effect of geometry on the inundation events and the temporal and spatial distribution of inundation over the space. From the result, it can be concluded that the 2-D flow model can be the effective implement for establishing the proper measure to the inundation on underground space systems, which generally have relatively long and narrow geometry with complex inner configuration.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.565-570
• /
• 2009

국내의 비정형 건축물은 현재 도입기로, 동대문디자인파크, 전곡선사박물관, 부산국제영화센터 등이 건설 계획 되어지고 있지만 대부분이 실시설계 또는 착공단계에 머물고 있고, 아직까지 구체적인 시공단계에 이른 건축물이 없는 실정으로 비정형외장재의 이중곡률 (Non-Uniform Rational B-Spines)을 반영한 프로토타이핑(Prototyping), 패널화(Panelizing), 현장조립 시 기하학 통제기법, 시공오차 측정기법, As-Planned 도면과 As-Built 도면의 비교를 통한 준공도면의 작성기법 등에 대한 준비가 절실히 필요한 상황이다. 그러나 현재 비정형 건축물의 설계는 초기계획(Concept Design) 단계에서 건축가와 구조기술자의 협업 중요성만 강조되고 있고, 건축물이 비정형화됨에 따라 기하학적으로 설계 및 시공되어야 하는 건축물의 외장재에 대한 설계방법과 시공단계에서 시공품질 확보방안, 시공 하자를 유발시키는 다양한 변수에 대한 대응방안 등은 아직까지도 그 중요성을 인식하지 못하고 있는 실정이다. 따라서 본 연구에서는 비정형 건축물의 설계에 사용되는 Architectural Geometry Control 도구 중 그 활용성이 부각되어 지고 있는 Bentley 사의 Generative Components를 활용하여 비정형 건축물의 이중곡률 곡면외장재의 부재생산을 위한 패널화, 제작도면 추출에 관한 연구를 수행하고자 한다.

• Structural Engineering and Mechanics
• /
• v.54 no.5
• /
• pp.829-853
• /
• 2015

This is an experimental study to investigate the behaviour of piled raft system in different types of sandy soil. A small scale "prototype" model was tested in a sand box with load applied to the foundation through a compression jack and measured by means of load cell. The settlement was measured at the raft by means of dial gauges, three strain gauges were attached on piles to measure the strains and calculate the load carried by each pile in the group. Nine configurations of group ($1{\times}2$, $1{\times}3$, $1{\times}4$, $2{\times}2$, $2{\times}3$, $2{\times}4$, $3{\times}3$, $3{\times}4$ and $4{\times}4$) were tested in the laboratory as a free standing pile group (the raft not in contact with the soil) and as a piled raft (the raft in contact with the soil), in addition to tests for raft (unpiled) with different sizes. It is found that when the number of piles within the group is small (less than 4), there is no evident contribution of the raft to the load carrying capacity. The failure load for a piled raft consisting of 9 piles is approximately 100% greater than free standing pile group containing the same number of piles. This difference increases to about 4 times for 16 pile group. The piles work as settlement reducers effectively when the number of piles is greater than 6 than when the number of piles is less than 6. The settlement can be increased by about 8 times in ($1{\times}2$) free standing pile group compared to the piled raft of the same size. The effect of piled raft in reducing the settlement vanishes when the number of piles exceeds 6.