• 국제초고층학회논문집
• /
• 제11권4호
• /
• pp.265-276
• /
• 2022

Double-Skin Facades (DSF) on tall buildings are becoming increasingly common in urban environments due to their ability to provide architectural merit, passive design, acoustic control and even improved structural efficiency. This study aims to understand the effects of porous DSF on the aerodynamic characteristics of tall buildings using wind tunnel tests. High Frequency Force Balance and pressure tests were performed on the CAARC standard tall building model with a variable porous DSF on the windward face. The introduction of a porous DSF did not adversely affect the overall mean forces and moments experienced by the building, with few differences compared to the standard tall building model. There was also minimal variation between the results for the three porosities tested: 50%, 65% and 80%. The presence of a full-height porous DSF was shown to effectively reduce the mean and fluctuating wind pressure on the side face of the building by about 10%, and a porous DSF over the lower half height of the building was almost as effective. This indicates that the porous DSF could be used to reduce the design load on cladding and fixtures on the side faces of tall buildings, where most damage to facades typically occurs.

• 한국실내디자인학회논문집
• /
• 제23권2호
• /
• pp.40-50
• /
• 2014

The purpose of this study was to investigate how brand identity expressional elements in cosmetic road shops' facades would affect the brand awareness of consumers while extracting those brand identity expressional elements observed in the facades of the cosmetic road shops. In order to achieve the research goal, the study used Q methodology, a method to measure subjectivity. The results have been summarized as follows. (1) The elements to express the brand identity found in the facades of the cosmetic road shops were observed to be two-dimensional expressional elements, and they should include a symbol, a logo, a signboard, materials to express an image (products, models) and a brand color. As for the three-dimensional expressional elements, they were a building (form, materials, pattern), decorations (lean-to roof, canopy, sculptures, lighting, screen) and a display window (focusing on products, visuality or the inside of a shop). (2) The findings of the analyses on the brand awareness using Q methodology have been presented as follows. (1) When multiple identity expressional elements which would be associated with each other are used, the brand awareness gets increased relatively efficiently. (2) In case of men, they would perceive a brand more easily through those formative expressional elements such as a form of a building. (3) In case of women, they would perceive a brand more conveniently through those visual expressional elements such as a brand color. (3) In conclusion, the study figured out that, among the brand identity expressional elements, the one which would influence the brand awareness most would be (1) the brand color, followed by (2) the building-form, (3) the lean-to roof, (4) the display window and (5) the logo. Based upon what has been learned so far, the study confirmed that when it comes to securing the brand awareness in the market, cosmetic companies should, first, realize how important it is to make good use of the two-dimensional (visual) expressional element, the brand color, and the three-dimensional expressional element, the form of the building, together before they even try to design facades of their shops on the streets.

• Wind and Structures
• /
• 제36권1호
• /
• pp.41-60
• /
• 2023

The effect of cladding panel size on the size reduction factor (SRF) of extreme area-averaging wind pressure (EAWP) on the facades of a high-rise building is often ignored in previous studies. Based on wind tunnel tests, this study investigated the horizontal and vertical correlations of wind pressure on the facade claddings of square-section high-rise buildings. Then, the influencing parameters on the SRF of the EAWP on the cladding panels were analyzed, which were the panel area, panel width, panel length and building width. The results show clear regional distinctions in the correlation of wind pressures on the building facades and the rules of the horizontal and vertical correlations are remarkably different, which causes the cladding size ratio to impact the SRF significantly. Therefore, this study suggests the use of the non-dimensional comprehensive size parameter b^𝜶h^1-𝜶/B (𝜶 is the fitting parameter) determined by the cladding panel horizontal size b, cladding panel vertical size h and the building width B rather than the cladding panel area to describe the variation of the EAWP. Finally, some empirical formula for the SRF of the EAWP on the cladding of a high-rise building is proposed with the nondimensional comprehensive size parameter.

• KIEAE Journal
• /
• 제9권6호
• /
• pp.65-72
• /
• 2009

Lighting for outdoor advertising is very common feature of building facades as they provide the information and commercial identification. As the interest of improving street beautification more widely, application of various lighting technologies has been develop for advertisement such as electric sign board and signage. Furthermore, the installation of higher sign luminance than needed has many negative consequences, including higher energy consumption and light pollution. There are now no standard for outdoor advertisements in terms of luminance, and installation of indiscreet outdoor advertisement without luminance consideration is becoming more commonplace. This study was to evaluate the luminous characteristics of outdoor advertising as a function of sign and building facade luminance, luminance ratio. Data were collected on 8 electric sign boards, 20 internally illuminated, externally illuminated, neon, and channel letter signs and 4 commercial areas. Photometric measurements were taken by CS-100(Minolta) and ProMetric-1400(Radiant Imaging) for various sign modes and sign design. Also luminance of building facades were analyzed according with CIE standard of maximum obtrusive light permitted for exterior lighting installations. The findings are as follows; (1) There were excessive luminance of electric sign boards that could affect adjacent building facade and night sky luminance. (2) Sings that are externally illuminated providing an inappropriate amount of light on to the outer surface of the sign caused higher building facade luminance and potential of unnecessary glare.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2009년도 춘계학술발표회 논문집
• /
• pp.115-117
• /
• 2009

Terrestrial Laser Scanner and Airborne Laser Scanning is one of the state of art surveying equipments. So This study deals with the combined use of mobile TLS(Terrestrial Laser Scanner) with ALS(Airborne Laser Scanning) to extract shoreline's topography information. These two systems have their own pros and cons. Mobile TLS can capture the facades of a low story building along the shoreline fast and quickly. Meanwhile, Due to viewpoint restrictions of ALS data collection, the amount of detail, which is available for the building facades is very limited. Therefore, it is recommended that the co-registration and geo-referencing methods of both two should be developed and the application of both system for shoreline mapping also should be investigated.

• ALGAE
• /
• 제23권2호
• /
• pp.91-114
• /
• 2008

Fifty seven taxa of Cyanobacteria and 15 taxa of Chlorophyta were recorded from the exterior of buildings and rock surfaces of monuments in different regions in India. Four cyanobacteria, e.g. Chroococcidiopsis kashayi, Pseudophormidium indicum, Plectonema puteale and Scytonema geitleri, and the green alga Trentepholia abietina var. tenue occur on the sub-aerial habitats throughout the year. In addition, five other green algae: Chlorococcum infusionum, Scenedesmus arcuatus, Trentepholia aurea, Gloeocystis polydermatica and Printzina effusa, and 18 other cyanobacteria taxa of the genera Chroococcus (5), Asterocapsa (1), Cyanosarcina (2), Gloeocapsa (7), Gloeothece (2) and Scytonema (1) occur on the sub-aerial surfaces enduring extreme temperature and desiccation during summer months of the tropics. During the rainy season, the warm and humid climatic regime coupled with availability of moisture supported an additional ten green algae and 29 cyanobacteria in eight and 17 genera, respectively. The green algal genera Klebsormidium, Stichococcus and Trebouxia, which are dominant in temperate regions, did not occur on the sub-aerial habitats in India, however, species of Gloeocapsa, Chroococcus, Chroococcidiopsis, Phormidium, Leptolyngbya, Nostoc, Scytonema, Chlorella and Trentepholia showed global occurrence in similar habitats.

• 한국태양에너지학회 논문집
• /
• 제30권5호
• /
• pp.56-62
• /
• 2010

The integration of PV modules into building facades or roof could raise their temperature that results in the reduction of PV system's electrical power generation. Hot air can be extracted from the space between PV modules and building envelope, and used for heating in buildings. PV/thermal collectors, or more generally known as PVT collectors, are devices that operate simultaneously to convert solar energy from the sun into two other useful energies, namely, electricity and heat. This paper compares the experimental performance of BIPVT((Building-Integrated Photovoltaic Thermal) collectors that applied on building roof and facade. There are four different cases: a roof-integrated PVT type and a facade-integrated PVT type, the base models with an air gap between the PV module and the surface, and the improved models for each types with aluminum fins attached to the PV modules. The accumulated thermal energy of the roof-integrated type was 15.8% higher than the facade-integrated regardless of fin attachment. The accumulated electrical energy of the roof-integrated type was 7.6% higher, compared to that of the facade-integrated. The efficiency differences among the collectors may be due to the fact that the pins absorbed heat from the PV module and emitted it to air layer.

• KIEAE Journal
• /
• 제4권2호
• /
• pp.11-18
• /
• 2004

Growing use of entire glass facades with metal frames are popularly witnessed in modern building practices and design competition as well. In spite of architectural aesthetics and view to outdoors, environmental issues still exist in that kind of buildings. One of the solutions for the problems might be the use of functional glasses such as a heat-resistant glass or various tinted glasses for the glass walls. This paper aims to provide performance data related to the impact of various transmittal materials of window systems on the light distribution. A series of computer simulation deals with the basic geometrical and optical design elements of a commonly used all-glass facades. Additionally an experimental configuration of the vertical window is proposed for better result of daylighting. A window system equipped with an inner-light shelf can improve the uniformity of natural light in a space by reducing the level of illumination near the window and redirecting light deeply into the space.

• 한국태양에너지학회 논문집
• /
• 제23권4호
• /
• pp.71-80
• /
• 2003

The purpose of this study is to analyze the window area ratio distribution of building facade in Tokyo metropolitan area. The survey was carried out in Marunouchi, Kanda, Kasai and Todoriki district. The results of this study were as follows; to propose of window area ratio production method, analyzed and surveyed window area ratio of each district building-used and to compared every wall window area ratio of building. Every wall window area ratio of office district is $20\sim40%$, ones of non-office district is 15% or 35%. Residential area results are every wall window area ratio of apartment is 35%, ones of a house is 15%. To increase of office building to appear that Kanda, Kasai added window area ratio. But, Marunouchi, Todoriki wad not this tendency. Above mentioned results are made out database.

• 국제초고층학회논문집
• /
• 제7권1호
• /
• pp.1-16
• /
• 2018

The emergence of tall buildings in the late $19^{th}$ century was possible by using new materials and separating the role of structures and that of non-structural walls from the traditional load-bearing walls that acted as both. The role of structures is more important in tall buildings than in any other building type due to the "premium for height". Among the walls freed from their structural roles, façades are of conspicuous importance as building identifiers, significant definers of building aesthetics, and environmental mediators. This paper studies dynamic interrelationship between the evolution of tall building structural systems and façade design, beginning from the early tall buildings of skeletal structures with primitive curtainwalls to the recent supertall buildings of various tubular and outrigger structures with more advanced contemporary curtainwalls.