• KIEAE Journal
• /
• 제12권1호
• /
• pp.83-90
• /
• 2012

Over the world, social demands and concerns of energy and resource depletions and environmental conservation have resulted in many researches and applications on sustainable development and construction. In order to support these demands and concerns, international green building certification systems such as LEED(Leadership in Energy and Environmental Design) and BREEAM(Building Research Establishment Environmental Assessment Method) were developed. In Korea, the green building certification system was introduced in 2000 and widely applied to all types of new buildings in order to induce the diffusion of sustainable buildings on May, 2010. This paper investigates the importance of assessment criteria on multi-unit apartment projects among certification rating systems using the AHP(Analytic Hierarchy Process) method and suggests a new direction on certification assessment standards. For applying the AHP method, the survey of staffs in green building certification consulting companies and architectural design companies was conducted via e-mail. As a result, criteria like energy, indoor environment, land use, pollution control, and ecological environment among 9 main ones turned out important on assessing green building certification at multi-unit apartment projects, while criteria like water resource, transportation, maintenance management, and material and resource did relatively unimportant.

• 디지털융복합연구
• /
• 제16권10호
• /
• pp.205-212
• /
• 2018

고성능 CPU/GPU의 개발과 심층신경망 등의 인공지능 알고리즘, 그리고 다량의 데이터 확보를 통해 기계학습이 다양한 응용 분야로 확대 적용되고 있다. 특히, 사물인터넷, 사회관계망서비스, 웹페이지, 공공데이터로부터 수집된 다량의 데이터들이 기계학습의 활용에 가속화를 가하고 있다. 기계학습을 위한 학습 데이터세트는 응용 분야와 데이터 종류에 따라 다양한 형식으로 존재하고 있어 효과적으로 데이터를 처리하고 기계학습에 적용하기에 어려움이 따른다. 이에 본 논문은 표준화된 절차에 따라 기계학습을 위한 학습 데이터세트를 구축하기 위한 방안을 연구하였다. 먼저 학습 데이터세트가 갖추어야할 요구사항을 문제 유형과 데이터 유형별로 분석하였다. 이를 토대로 기계학습 활용을 위한 학습 데이터세트 구축에 관한 참조모델을 제안하였다. 또한 학습 데이터세트 구축 참조모델을 국제 표준으로 개발하기 위해 대상 표준화 기구의 선정 및 표준화 전략을 제시하였다.

• 한국실내디자인학회논문집
• /
• 제24권5호
• /
• pp.117-127
• /
• 2015

This paper depicts a case study of the BIM (Building Information Modeling)-enabled evaluation of design alternatives for an actual remodeling project in Yeongwol, Korea. The increase of urban population and income followed by the growth of economy has derived massive supply of grand scale housing project in Korea since 1970s. Consequently, building remodeling became one of the feasible resolutions for renovating such old housings in these days. This paper aims to introduce a technical approach to such remodeling projects based on BIM-enabled applications focusing on quantitative analysis of design alternatives. Among the technical issues of such building remodeling projects, this paper focuses on the BIM-enabled area analysis and comparison between design alternatives to support decision-making even in early phase of remodeling design process. BIM and its variety of applications have broadly influenced the domain of AEC-FM (Architecture, Engineering, Construction, and Facility Management) within the lifecycle of buildings. As one of the applications facilitated by BIM, the automated area calculation and scenario-based comparison between alternatives can play an important role in the early phase of remodeling project. We modeled three design alternatives (buildings) and three housing modules (units) based on the actual case in Yeongwol city, Korea using a BIM design authoring tool. Nine combinatorial BIM models were demonstrated for the BIM-enabled review process described in this paper. To determine the most optimal design scenario among nine alternatives, this paper demonstrates a result of the conducted spatial program review. The main subject includes specific spatial program issues on; 1) the number of unit spaces; and 2) area of individual/grouped and private/shared spaces.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권9호
• /
• pp.3159-3176
• /
• 2014

This work presents an analysis of the buffer features of an access router, especially the size, the impact on delay and the packet loss rate. In particular, we study how these features can affect the Quality of Service (QoS) of multimedia applications when generating traffic bursts in local networks. First, we show how in a typical SME (Small and Medium Enterprise) network in which several multimedia flows (VoIP, videoconferencing and video surveillance) share access, the upgrade of the bandwidth of the internal network may cause the appearance of a significant amount of packet loss caused by buffer overflow. Secondly, the study shows that the bursty nature of the traffic in some applications traffic (video surveillance) may impair their QoS and that of other services (VoIP and videoconferencing), especially when a certain number of bursts overlap. Various tests have been developed with the aim of characterizing the problems that may appear when network capacity is increased in these scenarios. In some cases, especially when applications generating bursty traffic are present, increasing the network speed may lead to a deterioration in the quality. It has been found that the cause of this quality degradation is buffer overflow, which depends on the bandwidth relationship between the access and the internal networks. Besides, it has been necessary to describe the packet loss distribution by means of a histogram since, although most of the communications present good QoS results, a few of them have worse outcomes. Finally, in order to complete the study we present the MOS results for VoIP calculated from the delay and packet loss rate.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.491-500
• /
• 2004

As the applications of 3D GIS rapidly increase, the need for acquisition and continuos update of urban models is increasingly emphasized. Particularly, building models has been considered as the most crucial component of urban models. Many researchers thus have focused on building extraction from mainly aerial photos or airborne LIDAR data but so far mostly failed to achieve satisfactory results in terms of both completeness and precision because of the intrinsic limitation of the sensory data themselves. Therefore, instead of the airborne sensors, we utilize a terrestrial LIDAR to generate precise and complete building models. This paper presents the overview of the sensors for data acquisition, describes data processing methods for building modelling from the acquired data and summerizes the experimental results.

• 한국태양에너지학회 논문집
• /
• 제32권6호
• /
• pp.44-52
• /
• 2012

In all building's energy simulation applications, solar radiation must be calculated on inclined surfaces. Various solar radiation models based on measured data of specific region were used in building simulation programs. Therefore, we should choose the appropriate solar radiation model for Seoul. The purpose of this study is to compare four solar radiation models on inclined surfaces that are widely used in building energy simulations. In this case, it can be said the appropriate model in Seoul is the Isotropic model.

• 한국농촌건축학회논문집
• /
• 제14권1호
• /
• pp.75-82
• /
• 2012

Today, educational facilities are considered to be one of the most important built environment. And the appropriate combinations and applications of technical elements related to green building on the education facilities are emphasized and demanded. These are must be compatible with the occupants' activities and their needs. The objective of this research is to identify and analyze of green building technologies, based on Green Educational Facilities' Case Study in Korea, USA, and Japan. As a result of the comparative analysis of this research, the green technological approaches, problem, and characteristics on educational facilities in different area, climate zone are identified and analyzed by external environment, energy, materials and resources, and indoor environment. It is useful as basic reference for future green educational facilities' planning and design in Korea.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.198-199
• /
• 2017

In this paper, the applicability of PHC piles to replace Myanmar local piles were evaluated. In Myanmar, based on the size of the building, foundation design and field applications are carried out using bored pile and square pile. As a result of the analysis, the application of PHC pile is more economical than conventional bored pile or square pile which was applied in the high rise (17-story) and middle story (12-story) buildings. However, in the low - rise (8-story) building, the application of the existing square piles was found to be more economical than PHC pile.

• KIEAE Journal
• /
• 제9권5호
• /
• pp.13-20
• /
• 2009

This study suggested practical application of decision aid tool on re-evaluation of current buildings with a focus on a energy and economics evaluation methodology. In Europe, over forty percent of all construction activities are for retrofit. For efficient construction, various tools for re-evaluating existing buildings have been developed and are in use. Legislations of relevant laws and studies are actively initiated. In particular, EPIQR (Energy Performance Indoor environment Quality Retrofit), which was developed through the EU's Third and Fourth Framework Programs laid a foundation on a new concept-based decision aid tool for re-evaluation of existing buildings. As for actual applications, based on this, EPIQR+ was developed to be in line with a building maintenance guideline (SIA 469) and is actively applied to public buildings. This tool quantifies the degree of damages of existing buildings and suggests alternatives to users in energy (SIA 380/1) and economical perspectives. This study examined these preceding tools and suggested some trenchant approaching for more comprehensive and efficient use of re-evaluation tools in building maintenance.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.65-67
• /
• 2014

There are many elastomeric joint sealant applications in construction such as structural glazing, weatherproofing and insulating glass fabrication etc. Each sealant joints require unique durability functions to perform well through building life cycle. Elastomeric joints in bathroom and kitchen is one of areas which require durable sealing. In this application, anti fungal durability is proprietary function of sealant during building life cycle. Premature failure of anti fungus resistance of sealant is putting big stresses to general contractor as well as the inhabitants due to costly rework and poor sanitation. Accordingly, when chemists design a product, they must take into account various parameters not only formulation components also test conditions in order to have long term fungal durability. This paper reviews several biocide options with various industry standards for fungus resistance performance to suggest making new test method for construction sealant industry.