• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.35.1-35.1
• /
• 2010

The Cu(In,Ga)Se2(CIGS) thin film solar cells have been achieved until almost 20% efficiency by NREL. These solar cells include chemically deposited CdS as buffer layer between CIGS absorber layer and ZnO window layer. Although CIGS solar cells with CdS buffer layer show excellent performance, many groups made hard efforts to overcome its disadvantages in terms of high absorption of short wavelength, Cd hazardous element. Among Cd-free candidate materials, the CIGS thin film solar cells with Zn compound buffer layer seem to be promising with 15.2%(module by showa shell K.K.), 18.6%(small area by NREL). However, few groups were successful to report high-efficiency CIGS solar cells with Zn compound buffer layer, compared to be known how to fabricate these solar cells. Each group's chemical bah deposition (CBD) condition is seriously different. It may mean that it is not fully understood to grow high quality Zn compound thin film on the CIGS using CBD. In this study, we focused to clarify growth mechanism of chemically deposited Zn compound thin film on the CIGS, especially. Additionally, we tried to characterize junction properties with unfavorable issues, that is, slow growth rate, imperfect film coverage and minimize these issues. Early works reported that film deposition rate increased with reagent concentration and film covered whole rough CIGS surface. But they did not mention well how film growth of zinc compound evolves homogeneously or heterogeneously and what kinds of defects exist within film that can cause low solar performance. We observed sufficient correlation between growth quality and concentration of NH3 as complex agent. When NH3 concentration increased, thickness of zinc compound increased with dominant heterogeneous growth for high quality film. But the large amounts of NH3 in the solution made many particles of zinc hydroxide due to hydroxide ions. The zinc hydroxides bonded weakly to the CIGS surface have been removed at rinsing after CBD.

• 반도체디스플레이기술학회지
• /
• 제3권3호
• /
• pp.11-17
• /
• 2004

This research has been progressed for adhesive improvement of the Polyimide/Buffer layer/Cu at the COF(Chip On Film) which induced as the alternative plan about high concentration of a circuit or substrates according to demands of miniaturization and high efficiency of various electronic equipment. RF plasma equipment was applied to when plama pretreatment was performed for improvement of adhesive strength of PI and Cr as the buffer layer. Experimental fluents were a species of the buffer layer, depositied time and the ratio of $O_2$/Ar when performed to plasma pretreatment. The results are that Ni was superior to Cr at peel test according to a species of the buffer layer, peel strength and Cu THK were showed proportional relation to deposition structure of the same buffer layer and sample of the Cr depositied time(30 sec) and Cu depositied time(20 min) was showed good adhesion to peel test according to Cr's depositied time and Cu's depositied time. When perform PI's plasma pretreatment peel strength and $O_2$/Ar ratio were showed proportional relation. But $O_2$/Ar(2/5) was best condition since then decreased.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권4호
• /
• pp.304-308
• /
• 2005

The response of IPTG induction was investigated through the monitoring of the alkali consumption rate and buffer capacity during the cultivation of recombinant E. coli BL21 (DE3) harboring the plasmid pRSET-LacZ under the control of lac promoter. The rate of alkali consumption increased along with cell growth, but declined suddenly after approximately 0.2 h of IPTG induction. The buffer capacity also declined after 0.9 h of IPTG induction. The profile of buffer capacity seems to correlate with the level of acetate production. The IPTG response was monitored only when introduced into the mid-exponential phase of bacterial cell growth. The minimum concentration of IPTG for induction, which was found out to be 0.1 mM, can also be monitored on-line and in-situ. Therefore, the on-line monitoring of alkali consumption rate and buffer capacity can be an indicator of the metabolic shift initiated by IPTG supplement, as well as for the physiological state of cell growth.

• 한국식품과학회지
• /
• 제29권1호
• /
• pp.126-132
• /
• 1997

낮은 pH 환경에서 생장이 억제되는 혐기성 유산균인 bifidobacteria의 배양효율 증대를 위한 완충제로서 alginate로 고정화된 평균 지름 2.5 mm의 $CaCO_3$ 비드를 제조하였다. 고정화된 $CaCO_3$ 비드의 완충 효과를 조사하기 위하여 초산, 유산 및 초산과 유산을 3:2 몰농도 비율로 혼합한 산용액을 이용하여 pH 4.0으로 조정된 m-TPY 배지에 첨가되는 $CaCO_3$ 비드의 양을 달리하여 20분간 반응시킨 결과 첨가되는 $CaCO_3$ 비드의 양에 따라 다양한 pH 상승 효과가 나타남을 관찰하였고, 배양액에 첨가되는 $CaCO_3$ 비드의 양을 달리하여 bifidobacteria의 배양 특성을 조사한 결과 배양액에 첨가되는 $CaCO_3$ 비드의 양이 증가할수록 배양액내 완충능력과 균증식도가 크게 증가하였다. 또한, $CaCO_3$ 비드가 30%로 도입된 배양액에 포도당 농도를 0.5%, 1.0%, 1.5%, 2.0%, 2.5% 그리고 5.0%로 각각 첨가하여 당농도에 따른 bifidobacteria의 배양 특성을 조사한 결과 배양액내 당농도가 증가함에 따라 배양액내 균증식도와 대수기의 지속 시간이 크게 증가되었다. 따라서 bifidobacteria의 배양효율 증대를 위하여 완충제로서 고정화된 $CaCO_3$ 비드의 이용은 매우 효과적인 것으로 생각되었다.

• 대한약리학회지
• /
• 제8권2호
• /
• pp.63-69
• /
• 1972

The effects of omission of buffers from Krebs-Ringer medium on contractile activity, membrane potentials and ATP content of electrically stimulated isolated rat atria were investigated. 1) Contractile status: A rapid and marked depression of the contractile activity of atria occurred when buffer-free medium was substituted for the normal Krebs-Ringer medium. 2) Electrical status: The omission of buffers from medium did not alter the resting or action potential magnitudes of atria. However, the action potential duration was on initial increase followed by a decrease in the buffer-free medium. 3) ATP concentration: The omission of buffers from medium resulted in a marked decrease in the ATP levels of atria. It has been also found in the present study that bicarbonate buffer plays an important role for the maintenance of the contractility and ATP levels of the heart. The contractile depression by the omission of buffers was not directly associated with electrical alterations in resting or action potentials of the heart. In the absence of bicarbonate-buffer, glucose no longer plays to maintain the contractile activity and the ATP levels of rat atria.

• KSBB Journal
• /
• 제16권6호
• /
• pp.533-537
• /
• 2001

유청 단백질 중에서 $\alpha$-lactalbumin, $\beta$-lactoglobulin를 고성능 막 크로마코그래피를 이용하여 분리하는 것이다. 분리 메카니즘은 음이온 교환작용이며 고정상은 CIM DEAE, QA, So$_3$ disk (16$\times$3 mm)을 사용하였다. 이동상은 buffer A (20 mM Tris-HCI, pH 7.3)와 buffer B (buffer A + 1 M NaCl)를 사용하였으며 $\alpha$-lactalbumin, $\beta$-lactoglobulin를 분리하기 위해서 구배용매 조성법을 사용하였다. 각 이동상의 조성에 따른 최적의 이동상 조성(Buffer A/Buffer B=100/0 - 30/70 vol%, gradient time 1 min, 30/70 - 10/90 vol%, gradient time 2 min)을 실험적으로 얻었고 4 ml/min의 이동상 유속에서 3분내에 $\alpha$-lactalbumin, $\beta$-lactoglobulin를 분리 할 수 있었다. 유청 단백질 중에 $\alpha$-lactalbumin, $\beta$-lactoglobulin을 HPMC을 적용하여 분리하였고, 유청 단백질의 기능적 성질, 분리 방법에 대해 알아보았다.

• 대한소아치과학회지
• /
• 제31권2호
• /
• pp.314-322
• /
• 2004

글루캔 형성은 이온, 완충액 및 영양물질 등과 같은 구강 내 존재하는 물질과 이들의 변화에 영향을 받는다. 본 연구에서는 치아 우식증의 중요한 원인균인 Streptococcus mutans를 실험균으로 하여 수용성 글루캔 합성 효소인 GTFD 유전자의 발현에 대한 이온 및 완충액의 영향을 Fluorescent in situ hybridization 방법으로 관찰하여 다음의 결과를 얻었다. 1. $CaCl_2$ 농도가 1.0mM, KCl 농도가 2.5mM, $MgCl_2$의 농도가 0.4mM일 때 생균수가 가장 많았다. 2. 완충액의 경우 sodium bicarbonate 10mM, sodium phosphate 1mM, potassium phosphate 0.1mM에서 생균수가 가장 많았고, 3가지 완충액 모두 100mM 농도에서 생균수가 가장 적었다. 3. 자당이 함유되지 않은 BHI 배지에 비해 1%자당을 첨가한 경우 gtfD 유전자의 mRNA 발현에 따른 녹색형광이 관찰되었다. 4. $CaCl_2$ 0.25mM일 때 gtfD 유전자의 mRNA 발현에 따른 녹색형광이 대조군보다 강하였고, KCl의 경우 10mM일 때 대조군과 유사한 녹색형광을 나타냈으나, 다른 농도에서는 거의 관찰되지 않았다. $MgCl_2$의 경우 각 농도에서 대조군보다 녹색형광이 약하게 나타났다. 5. Sodium bicarbonate, sodium phosphate 완충액의 경우 mRNA 발현에 따른 녹색형광이 각 농도에서 대조군과 유사하게 나타났으며, potassium phosphate 완충액의 경우 100mM에서 녹색형광을 거의 관찰할 수 없었다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권1호
• /
• pp.47-53
• /
• 2003

An experimental study on the chromatographic separation of maltopentaose from a mixture, including glucose, maltose, maltotriose, and maltopentaose, was carried out in a nonionic polymeric sorbent column while varying the operating conditions, such as the solution pH, buffer contents, and isopropyl alcohol (1PA) concentration. Unlike the pH and buffer contents, the IPA concentration had a Significant impact on the single component chromatograms for maltopentaose. The retention times of the maltooligosaccharides with the nonionic polymeric sorbent Sp207 were in the following order: glucose < maltose < maltotriose < maltopentaose. From the experimental binary, ternary, and quaternary chromatograms, gradient chromatographic separation with a changing IPA concentration as a function of time was required to obtain high-purity maltopentaose and reduce the elution time.

• Korean Chemical Engineering Research
• /
• 제54권1호
• /
• pp.70-74
• /
• 2016

본 연구에서는 창자파래(Enteromorpha intestinalis)로부터 citrate buffer를 사용하여 전처리 조건(고액비, 반응온도, buffer의 pH와 농도)에 따른 전처리 반응과 효소가수분해를 통한 가수분해 수율을 조사하였다. 0.25 M, pH 3.5의 citrate buffer를 이용하여 $140^{\circ}C$에서 60분간 전처리를 수행한 결과, 5.40%의 가수분해 수율을 얻었다. 최종적으로 전처리 반응 후 24시간의 효소 가수분해를 통하여 18.68%의 가수분해 수율을 얻었다. 이 결과는 대조구에 비하여 약 1.81배 증가한 결과이다.

• 한국식품영양과학회지
• /
• 제17권4호
• /
• pp.358-364
• /
• 1988

pH조정제 sodium malate buffer(SMB)가 김치의 숙성에 미치는 영향을 검토하기 이하여 소금농도별 ($0{\sim}6%$) 및 SMB첨가농도별($1{\sim}2%$)로 김치를 담그고 숙성중 질적변화를 조사하였다. 그결과 소금농도가 증가함에 따라 김치의 숙성이 지연되었고 SMB를 첨가한 경우 및 그 첨가농도가 높은 경우가 더욱더 숙성이 지연되었다. 산도는 SMB형 가구가 오히려 높았으나 관능검사결과 산도와 반비례하여 SMB 첨가에 의한 완충능에 기인된 것으로 판단되었으며 김치의 숙성이 진행됨에 따라 완충능은 더욱 증가하였다. 소금 2% 첨가김치에 SMB의 1%첨가한 경우 2% 소금만을 첨가한 경우에 비해 $25^{\circ}C$에서 약 36시간 숙성이 지연되었으며 소금 농도가 비교적 높은 4% 첨가 김치보다는 약 12시간 숙성이 지연되었다.