• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.209-216
• /
• 1999

Prefabricated piles used for construction of highway bridges are most of steel pipe piles and few of prestressed concrete piles. Its installation and inspection are less controllable and have much uncertainty due to changes in subsoil and groundwater conditions. However, most of these piles have been controlled using outdated pile driving formula such as Hiley's formula which models just the energy conservation due to its simple applicability in the field. This formula results in overstriking or sometimes understocking due to buckling of pile head. Engineers cannot ensure by the formula whether pile is installed properly. To compensate the drawbacks of excising pile formula, parameters in Hiley's formula and 55 formula are reviewed. Final sets used in pile formula and PDA test results(E.O.I.D) are measured during pile driving along the depth. These measured results along the depth were compared with each other and with N values, so that relations between the each result could be inferred. Also the factor of safety which can be used for pile driving formula are suggested.

• Steel and Composite Structures
• /
• 제5권5호
• /
• pp.407-420
• /
• 2005

This study presents the strength of braced and unbraced cold-formed steel wall frames consisting of several wall studs acting as columns, top and bottom tracks, and bracing members. The strength and the buckling mode of steel wall frames were found to be different due to the change of bracing type. In addition, the spacing of wall studs is a crucial factor to the strength of steel wall frames. The comparisons were made between the test results and the predictions computed based on AISI Code. The related specifications do not clearly provides the effective length factors for the member of cold-formed steel frame under compression. This paper proposes effective length factors for the steel wall frames based on the test results. A theoretical model is also derived to obtain the modulus of elastic support provided by the bracing at mid-height of steel wall frames in this research.

• Structural Engineering and Mechanics
• /
• 제76권3호
• /
• pp.413-420
• /
• 2020

Considering inverse cotangential shear strain function, the present paper studies nonlinear stability of nonlocal higher-order refined beams made of metal foams based on Chebyshev-Ritz method. Based on inverse cotangential beam model, it is feasible to incorporate shear deformations needless of shear correction factor. Metal foam is supposed to contain different distributions of pores across the beam thickness. Also, presented Chebyshev-Ritz method can provide a unified solution for considering various boundary conditions based on simply-supported and clamped edges. Nonlinear effects have been included based upon von-karman's assumption and nonlinear elastic foundation. The buckling curves are shown to be affected by pore distribution, geometric imperfection of the beam, nonlocal scale factor, foundation and geometrical factors.

• Clinical and Experimental Pediatrics
• /
• 제65권3호
• /
• pp.115-126
• /
• 2022

Retinopathy of prematurity (ROP) is among the most common causes of childhood blindness. Three phases of ROP epidemics have been observed worldwide since ROP was first described in the 1940s. Despite advances in neonatal care, the occurrence of ROP and associated visual impairment has been increasing somewhere on Earth and remains difficult to control. Conventional treatment options for preventing ROP progression include retinal ablation using cryotherapy or laser therapy. With the emergence of anti-vascular endothelial growth factor (anti-VEGF) treatment for ocular diseases, the efficacy and safety of anti-VEGF therapy for ROP have recently been actively discussed. In the advanced stage of ROP with retinal detachment, surgical treatment including scleral buckling or vitrectomy is needed to maintain or induce retinal attachment. At this stage, the visual outcome is usually poor despite successful anatomical retinal attachment. Therefore, preventing ROP progression by timely screening examinations and treatment remains the most important part of ROP management.

• 한국강구조학회 논문집
• /
• 제25권2호
• /
• pp.131-139
• /
• 2013

본 연구의 목적은 H-형강 압축재의 온도상승에 따른 파괴거동을 중심으로 압축력과 파괴온도의 상관관계를 파악하기 위한 실험을 수행하는 것이다. SS400 강재로 제작된 H-형강의 시험체를 선정하여, ISO 834의 재하가열 시험방법에 따라 온도 상승에 대한 실험을 한국방재시험연구원(FILK)에서 수행하였다. 고온상태의 강재에 대한 항복강도 및 탄성계수의 감소계수는 EC3 (Eurocode3) Part 1.2 (1993) 관계식을 근거로 하여 파괴온도시 국부 및 전체좌굴 응력도와 항복응력도를 실험결과와 비교 검토하였다. 실험조건은 세장비 45.4이고 상온에서의 항복내력에 대한 50%, 70%, 80%를 재하압축력으로 설정하여 파괴온도를 측정하였다. 파괴온도와 재하압축력에 대한 실험결과로 부터 온도상승에 따른 내력은 탄성 좌굴강도보다는 항복내력에 근접함을 파악할 수 있었다.

• Steel and Composite Structures
• /
• 제35권4호
• /
• pp.599-609
• /
• 2020

The tension-only braced frames (TOBFs) are widely used as a lateral force resisting system (LFRS) in low-rise steel buildings due to their simplicity and economic advantage. However, the system has poor seismic energy dissipation capacity and pinched hysteresis behavior caused by early buckling of slender bracing members. The main concern in utilizing the TOBF system is the determination of appropriate performance factors for seismic design. A formalized approach to quantify the seismic performance factor (SPF) based on determining an acceptable margin of safety against collapse is introduced by FEMA P695. The methodology is applied in this paper to assess the SPFs of the TOBF systems. For this purpose, a trial value of the R factor was first employed to design and model a set of TOBF archetype structures. Afterwards, the level of safety against collapse provided by the assumed R factor was investigated by using the non-linear analysis procedure of FEMA P695 comprising incremental dynamic analysis (IDA) under a set of prescribed ground motions. It was found that the R factor of 3.0 is appropriate for safe design of TOBFs. Also, the system overstrength factor (Ω₀) was estimated as 2.0 by performing non-linear static analyses.

• Structural Engineering and Mechanics
• /
• 제60권2호
• /
• pp.251-269
• /
• 2016

In common structural systems, there are some limitations to provide adequate lateral stiffness, high ductility, and architectural openings simultaneously. Consequently, the concept of T-Resisting Frame (TRF) has been introduced to improve the performance of structures. In this study, Configuration of TRF is a Vertical I-shaped Plate Girder (V.P.G) which is placed in the middle of the span and connected to side columns by two Horizontal Plate Girders (H.P.Gs) at each story level. System performance is improved by utilizing rigid connections in link beams (H.P.Gs). Plastic deformation leads to tension field action in H.P.Gs and causes energy dissipation in TRF; therefore, V.P.G. High plastic deformation in web of TRF's members affects the ductility of system. Moreover, in order to prevent shear buckling in web of TRF's members and improve overall performance of the system, appropriate criteria for placement of web stiffeners are presented in this study. In addition, an experimental study is conducted by applying cyclic loading and using finite element models. As a result, hysteresis curves indicate adequate lateral stiffness, stable hysteretic behavior, and high ductility factor of 6.73.

• 대한토목학회논문집
• /
• 제11권4호
• /
• pp.17-26
• /
• 1991

이 논문(論文)은 단순지지(單純支持) 변단면(變斷面) 기둥의 임계하중(臨界荷重) 및 후좌굴(後挫屈) 거동(擧動)에 관한 연구(硏究)이다. 이 논문(論文)에서는 변단면(變斷面)을 갖는 후좌굴(後挫屈) 기둥의 정확탄성곡선(正確彈性曲線)을 지배(支配)하는 미분방정식(微分方程式)을 3차이론(次理論)에 의(依)하여 유도(誘導)하고, 이 미분방정식(微分方程式)을 Runge-Kutta method와 Regula-Falsi method를 이용하여 임계하중(臨界荷重)과 후좌굴(後挫屈) 기둥의 정확탄성곡선(正確彈性曲線)을 산출(算出)하였다. 실제(實際)의 수치해석(數値解析) 예(例)에서는 변화(變化)높이 구형단면(矩形斷面), 변화폭(變化幅) 구형단면(矩形斷面), 정방형단면(正方形斷面)/원형단면(圓形斷面)의 3가지 단면형상(斷面形狀)에 대하여 수치해석(數値解析)하였다. 수치해석(數値解析)의 결과(結果)로, 하중(荷重)-처짐의 평형경로(平衡經路), 후좌굴(後挫屈) 기둥의 정확탄성곡선(正確彈性曲線), 임계하중(臨界荷重)-단면화(斷面化) 사이의 관계(關係)를 그림에 나타내었다. 또한 단면형상계수(斷面形狀係數)가 임계하중(臨界荷重)과 후좌굴(後挫屈) 거동(擧動)에 미치는 영향(影響)을 분석(分析)하였다.

• 한국강구조학회 논문집
• /
• 제13권4호
• /
• pp.351-361
• /
• 2001

골조의 보-기둥 접합부는 보통 강접합과 반강접합 또는 핀접합으로 구성된 분류체계에서 평가되어 진다. 대표적인 분류체계로는 EC3와 Bjorhovede등에 의한 체계가 있다. 그런데 EC3의 경우 강접합과 반강접합 사이의 경계값은 접합부의 모멘트 강도와 강성 면에서 너무나 높은 제한선을 가지고 있고, Bjorhovede등의 경우 강접합일 때의 거동을 표현하는데 부적한 강성을 갖을 수 있다는 문제점을 안고 있다. 본 연구에서는 스프링으로 모델링된 접합부를 갖는 비가새 1층 1경간의 골조를 대상으로 기둥에 대한 보의 강성비 ($\rho$)와 보에 대한 접합부의 강성비(k)로 완전 강접 골조의 임계하중과 접합부를 갖는 골조의 임계하중을 비교하여, 수정된 분류체계를 제안한다. 제안된 분류체계가 EC3나 Bjorhovede등과 비교할 때 실용적이고 실제적임을 실험데이터를 이용해서 검증하였다.

• 한국지진공학회논문집
• /
• 제10권2호
• /
• pp.11-19
• /
• 2006

본 연구에서는 4층, 10층, 30층 스태거드 트러스 시스템 (STS)의 비탄성 정적해석에 의한 하중-변위 관계와 비탄성거동을 분석하고, 그 결과를 바탕으로 STS의 내진성능을 평가하였다. 또한 동일한 규모의 모멘트골조 및 가새골조의 거동과 비교함으로써 STS의 횡력 저항 능력을 파악하였다. 해석결과에 따르면, STS는 일반적으로 적용되는 구조시스템에 비하여 비교적 만족할 만한 내진성능을 보유하는 것으로 나타났다. 그러나 중층 이상의 STS에 있어서는 상대적으로 강성이 작은 비렌딜 패널 상.하현재에 소성변형이 발생한 후 인접한 수직 가새가 항복함으로써, 다른 층으로 소성변형이 전이되지 못하여 약층의 형성에 의한 취성적인 거동을 보인다. 그러므로 스태거드 트러스 시스템의 연성능력을 확보하기 위해서는 비렌딜 패널의 수직 가새를 보강하여 비렌딜 패널 상하현재에 발생한 소성변형을 다른 층의 비렌틸 패널로 유도하는 것이 필요하다.