• Journal of Conservation Science
• /
• v.6 no.1 s.7
• /
• pp.31-60
• /
• 1997

Stone-cultural-properties, distributed in Naju, Hwasun and a part of Jangheung, have been investigated and studied on the characteristics, rock weathering and phases in the geological and conservational points of view. The properities involve pagoda and twelve stupas, four stone-buddha, three stone monuments, two stone-lantern, four stone-Jangseung, one and flag-pole. The rocks used are mainly pebble-bearing tuffaceous rocks of the Cretaceous age which are widely distributed in the area. However, granites are also used in some properties. These rocks are strongly influenced by weathering and pervasive moss. The mottled rock surfaces in some properties are in colors due to pervasive moss different. Parts of some cultural properties are broken which results in structurally unstable. Cultural properties in the area are relatively well conserved at the earth consolidated by ramming and by iron fence. However some cultural properties are partly repaired by using other hinds of rock phases which results in different colors in weathered rock surface. For conservation, rock phases, weathered surface colors, and relationships with original parts must be scientifically considered in repairment forward.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.3
• /
• pp.299-310
• /
• 2016

The Stele for Buddhist Monk Wonjong at Godalsa Temple Site was destroyed a long time ago. Only the tortoise-shaped pedestal and the ornamental capstone in the form of a hornless dragon remain at the site and the broken stele body is stored at the National Museum of Korea today. The stele is made of two kinds of rocks that are coarse-grained biotite granite for the pedestal and the capstone, and fine-grained biotite granite including hornblende assemblages and feldspar phenocrysts for the stele body. The coarse-grained biotite granite of the pedestal and capstone showed same magnetic susceptibility and lithological characteristics with biotite granite outcrops in Yeoju area, whereas the fine-grained granite of the stele body did not. To find a provenance of the stele body stone, we investigated Korean granites in terms of magnetic susceptibility, lithology and old recordings about construction process of the stele. As a result, Haeju granite is the most likely to be a cognate rock of the stele body stone as it has same texture and lithological characteristics like color, hornblende assemblages, mineral composition and magnetic susceptibility. It is imported from Haeju (North Korea) to South Korea via China commercially, and the most suitable for a replica stone of the stele body.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.2
• /
• pp.72-99
• /
• 2012

Cheomseongdae, Korea's so-called "star-gazing tower" located in the former Silla Dynasty capital of Gyeongju, is generally believed to have maintained its original shape since its construction in 647. The stone structure was closely examined and measured by Gyeongju National Museum in 1962 and reexamined by Korean National Research Institute of Cultural Heritage in 2009. This research noted the following structural anomalies of Cheomseongdae. A corner of the top rectangle layer was broken diagonally in a form that can never be attributed to a natural cause. The four metal clamps under the top rectangle layer had been missing. Four grooves, with unknown usage, exist on the sides of the long rectangular stones projected out of the circular body at the second and third circular layers from the top. On the second circular layer from the top, there are three flat stones, less than a half as tall as their surrounding stones. The average height of the third circular layer from the top is only 23.5 cm, while the overall average of the entire 27 circular layers is 29.9cm. This research postulates that all these anomalies are due to prior destructions and improper restorations of the structure. The first destruction and restoration of Cheomsengdae was likely to have occurred before the mid 15th century. The damages might include a pavilion on the top of the structure and a stone with the name of the structure carved in. The Mongolian invasion in the 13th century was a most likely cause. After the restoration, the structure suffered at least another attack. The damages on the top layer and the missing iron clamps were due to the later attack. The grooves and flat stones were to house holding device that affixed certain objects to the outer surface of the circular body. The metal or stone objects might have faced upward at the four corners of Chemseongdae, bridging the gaps between the rectangle layers and circular layers. The current Chemseongdae lost at least the four affixed objects, four holding devices, and one flat stone.

• Agricultural and Biosystems Engineering
• /
• v.2 no.1
• /
• pp.7-14
• /
• 2001

A rice mill plant with a capacity of 3 t/h was constructed with automated facilities at Chonnam National University. A simulation model was developed with SLAMSYSTEM for evaluation and improving the rice mill process. The developed model was validated in the views of hulling efficiency, milling efficiency, milled rice recovery, other materials produced, at bottlenecks in the processes. The results of hulling efficiency, milling efficiency, milled rice recovery in the simulation were, respectively, 81.1%, 89,5%, and 73.1%, while those of the actual mill plant were 81.5%, 90.2%, and 73.5%. The simulation results including the rates of other materials(chaff, bran, broken rice, stone, etc) produced in the processes were almost similar with those of the actual process. In the simulation the bottlenecks were found out in the process for separating brown rice and sorting colored rice. These phenomena also appeared in the actual process. It needed to increase the hourly capacities of the brown rice separator and the rice color sorter. As the developed model could well express the automated rice mill plant, it could be used for designing and improving rice mill plants.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.305-327
• /
• 2005

Although the stone pagoda in Mireuk Temple site, Iksan, Cholla Province has been collapsed long time ago, few historical record has clearly explained the reason why the pagoda was collapsed and when. The west side of the pagoda have been destroyed from top to the sixth floor and the broken or damaged stone materials have been piled up in disorder. the lower part in the west was reinforced and enclosed by a stone embankment levelled to the height of the first storey of the pagoda. With no record informing the historical fact when it was made and by whom, it is only presumed that the embankment may have been built long time ago in order to prevent remains from further destruction. In the second chapter of the study, it has been tried to restore a reasonable historical background of the pagoda based on records or comments found in literatures such as traditional poetry and essays in chronological order. The collapsed slope in the west side, just above the embankment surrounding the lower part of the pagoda, was concreted in 1915 during the Japanese colonial period. Then in 1998, the Jeollabukdo has examined the structural safety of the pagoda. The Cultural Properties Committee has decided have the concrete layer removed and moreover to take apart the whole pagoda. It is also included that the disassembled stone materials should be given proper conservation treatments before being put into the place where they were in the reassembling process. The front view of the collapsed phase of the pagoda was revealed when the concrete-covered layer was removed. A hypothesis was built that there may be as many different appearances of collapsed pagoda depending on natural causes such as earthquake, sunken foundation, flood and typhoon. In chapter three, characteristic features were classified by examining various images of pagodas destroyed by different natural reasons mentioned in historical records. The chapter four dealt with comparison and analysis on the conditions shown in the stone pagoda in Mireuk Temple site and other examples studied in advance. The result of the study revealed that though having been made higher than the ground surface, the podium or the base of the pagoda actually has been eroded by rain and water. The erosion is supposed not only to have been proceeded for a long time without break but also to have caused the first storey body stone in the west inclined to outward. It has come to a conclusion that the pagoda may have been lead to collapse when the first storey body stone, supporting the whole weight from the upper storeys, became out of upright position and lost its balance. However, no such distinctive features of structural changes shown in pagodas collapsed by natural causes like earthquake, typhoon or sunken basement, have been found in the stone pagoda in Mireuk Temple site.

• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.385-392
• /
• 2005

The object of this study is to prove the quality and reliability of recycled aggregate concrete by finding a way to improve the durability of the material through the experiment on the accelerated carbonation, freezing and thaw, and drying shrinkage, analysing the influence on the durability to Promote more active use of recycled aggregate concrete. The result of study as follows. (1) Resistibility to the freeze and thaw of the recycled aggregate concrete showed relative dynamic modulus of elasticity over $90\%$ which is very good, and all cycles show $99.2{\~}91.0\%$ dynamic modulus of elasticity which is improved compared with the $97.5{\~}90.6\%$ relative dynamic modulus of elasticity of ordinary concrete made of broken stone. (2) Carbonated thickness of the recycled aggregate concrete and the normal concrete was similar or it appeared with the tendency which it diminishes more or less. (3) Length change rate in drying contraction of the recycled aggregate concrete made of the recycled aggregate was lower than the ordinary concrete made of the broken stone by $18.5{\~}3.9\%$ in all blending.

• Explosives and Blasting
• /
• v.29 no.2
• /
• pp.13-31
• /
• 2011

Air deck charge blast methods have been applied to improve the fragmentation in open cut bench blastings for mining developments. However, during large scale bench blasting operations, there exist some problems such as boulder productions due to explosive charge concentration. Especially, in case of lime stone mining, when air deck method is applied, there has been unintentionally concentrated on charging because the inside holes are often broken by erosion and decomposition. In this study, compared with general blasting, air deck blasting has been focused in lime stone mining. In other to maximize its efficiency, inside hole was examined by endoscope in advance and deck charge using air tube was applied to the section in which concentration might be taken place. Blasting efficiency, fragmentation, charging reduction rate, and total working hours (from charging to blasting) were the main object for comparing, and as a result, air deck was more efficient then the general blasting in all aspects except total working hours.

• Conservation and Restoration of Cultural Heritage
• /
• v.1 no.1
• /
• pp.39-48
• /
• 2012

The first twenty-five years of scientific study within Korea on Korean traditional ceramics has been characterized as a bridging effort to understand the rich field of artistic ceramic masterpieces on one hand with analytic results gained from mounds of broken shards and kiln wastes on the other. First shard pieces were collected directly from the waste mounds, but most of the analyzed shards were provided by art historians and museum staffs directly involved in systematic excavations. The scientific study is viewed as one of many complimentary ways in learning about the multi-faceted ceramics culture, ultimately connecting human spirits and endeavors from the past to the present to the future. About 1350 pieces of analyzed shards have been so far collected and organized according to the production location and time period. From the experimental results of the analysis, the compositional and microstructural characteristics of bodies and glazes have been deduced for many kiln sites of Goryeo and Joseon dynasties. Except for a few local kilns, porcelain stone was used as body material in both dynasties. The principle of mixing a clay component with a flux material was used in Korean glazes as was in China. The clay component different from body clay was often used early on. In Gangjin a porcelain material appropriate for whiteware body was mixed for celadon glaze, and in Joseon Gwangju kilns glaze stone was chief clay material. The use of wood ash persisted in Korea even in making buncheong glazes, but in Joseon whitewares burnt lime and eventually crushed lime were used as flux material.

• Journal of architectural history
• /
• v.14 no.2 s.42
• /
• pp.57-69
• /
• 2005

A stylobate, part of the foundation for hardening soil below the floor, has been built with a variety of materials, such as stone, tile and brick, in several kinds of combined constructions of soil, stone, and brick. In particular, Baekje used a tile-piled stylobate that could not be found in Goguryeo and Silla counterparts, thus showing outstanding performance in the construction culture. Archeological excavations up to now evidence the stylobate played a role in building the magnificent structures or enhancing the decorative effects. It can be enough inferred that such features are reflected on dual footing stylobate, framed stylobate and tile-piled stylobate. Baekje had delivered its techniques for constructing stylobate to Silla from about the middle of 6th century. They can be traced down back from the dual stylobate that has been identified in Hwangryong-sa temple lastly built in the old site of Silla, those constructed with broken stones at Najeong, tile-piled stylobate of the mode of vertical-horizontal rows which had been established in Inwang-dong, Gyeongju, the capital of the kingdom, and a framed stylobate at Hall enshrining Buddha (Golden Hall) site of Gameun-sa temple site. Recently, relics of structures, including temple sites, are intermittently being unearthed in the old sites of Baekje and Silla. However, studies linking archeology with architecture can be rarely found up to now. It is, therefore, necessary that the relics should be correctly construed in archeological as well as architectural aspects. We expect that further studies can graft architectural insight into archeological analysis.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2102-2107
• /
• 2007

GSHP systems are used for air-conditioning systems in commercial buildings, schools, and factories because of low operating and maintenance costs. These systems use the earth as a heat source in heating and a heat sink in cooling mode. Ground heat exchangers are classified by a horizontal and vertical type according to the installation method. Vertical type is usually constructed by placing small diameter high density polyethylene tube in a vertical borehole. Vertical tube sizes range from 20 to 40 mm nominal diameter. Borehole depth range between 100 and 200 m depending on local drilling conditions and available equipment. In this study, to evaluate the performance of single u-tube with bentonite grouting, single u-tube with broken stone grouting and double u-tube bentonite grouting of vertical ground heat exchangers, test sections are buried on the earth and experimental apparatus is installed. Therefore the heat transfer performance and pressure loss of these are estimated.