• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.38-41
• /
• 1998

Due to the increasing demand to multimedia services over wireless communication network, LMDS(Local Multipoint Distribution Service) has been proposed as an alternate approach for broadband wireless access network. But LMDS, Which uses the mmwavelength radio spectrum, has been limited for unknown microwave frequency characteristics. In this paper, we analyze the parameters related to the system design on 28GHz frequency: Propagation path loss and rainfall attenuation. Based on these analytical results, the proper cell size in Korea is determined. We also analyze the bit error rate and frame loss rate for various kinds of digital modulation schemes(QAM 4, 16, 64, 256). Finally, we apply to ㅍ service to evaluate a call blocking rate, efficiency and channel capacity.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1113-1114
• /
• 2008

WiBro(Wireless Broadband) is the standard of high-speed portable internet based on OFDMA/TDD (orthogonal frequency division multiple access / time division duplexing) techniques, and the subset of consolidated version of IEEE802.16e Wireless MAN standard. In this paper, we propose the design method of WiBro system. Proposed method used KSFM neural network blind equalization with Bussgang algorithms.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.10
• /
• pp.9-25
• /
• 1997

Personal Communication Networks will be composed of ATM-based broadband ISDN in the future. However, unlike the wired networks, many challenges will arise in the wireless communication service such as PCS. These callenges are frequency alteration of cell routing path, relatively very high error rate at transmission over the wireless interface, etc. Particularly, the alteration of cell routing path caused by handoff makes temporary deterioration of QoS. In this paper, the signaling flows of handoff scenarios which may occur on Personal Communication Networks are presented, and verified by Pertri-Net toolkit. In addition, the cell flow control scheme which minimizes the lagging gap between cells and maintains the cell sequence during handoff is proposed. The proposed scheme can be summarized as the differentiation of normal queue and handoff queue, and the cell flow control between these queues. For verification of the proposed scheme, we used two approaches, which are mathermatical manipulation and SLAM simulation.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.417-420
• /
• 2001

In this paper, a transceiver using waveguide modules for 60 GHz band wireless LAN is implemented and analyzed. The characteristics of millimeter-wave transmitter are 0 dbm output power, 10.5 dB gain and 38 dBc spurious emition. The receiver's are 3.16 dB noise figure, 8.8 dB gain, -86dBm sensitivity. Maximum communication distance is more than loom. Intermediate frequency comply with IEEE 802.11b. The transfer of multimedia files is performed. The transceiver's data rate can vary with intermediate frequency bandwidth and the transceiver is designed more than 200 Mbps.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.21-24
• /
• 2001

Bluetooth wireless technology is a publicly available specification proposed for Radio Frequency (RF) communication for short-range and point-to-multipoint voice and data transfer. It operates in the 2.4GHz ISM(Industrial, Scientific and Medical) band and offers the potential for low-cost, broadband wireless access for various mobile and portable devices at range of about 10 meters. In this paper, we describe the structure and the test results of the bluetooth baseband module we have developed. This module has a UART interface for HCI and a audio codec for voice. The interface between controller and this module supports common control interface. An FPGA implementation of this module is tested for file and bit-stream transfers between PCs.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.454-458
• /
• 2003

It is well known that the antenna for wireless Tx/Rx isolation detector should have the broadband characteristics. Such antennas can be applied in all the frequency ranges such as Cellular, PCS, IMT-2000. In this paper, using the Finite-Difference Time-Domain(FDTD) method, one design example is given for the antenna operating in the frequency ranges of $800MHz{\sim}900 MHz$, $1.7GHz{\sim}2.2GHz$.

• ETRI Journal
• /
• v.32 no.3
• /
• pp.475-478
• /
• 2010

A multiband meandered monopole antenna is proposed for digital video broadcasting handheld (DVB-H), global positioning system, personal communications service, wireless broadband (Wibro), and wireless local area network (WLAN) applications. The proposed antenna consists of a meandered line, a shorted length strip line, and a conductor strip between a meandered line and a microstrip feed line. By tuning a short strip and a conductor, a multiband impedance matching is achieved. The proposed antenna has an omnidirectional radiation and yields an antenna gain of greater than -3 dBi in the DVB-H band and 4.5 dBi in the Wibro and WLAN bands. Details of the proposed antenna design and experimental results are presented.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.30-32
• /
• 2005

Internet의 확대와 망의 진화에 따라 현 통신 방식은 기존 회선 교환 방식에서 패킷 교환 방식으로 진화를 한다. NGN(Next Generation Network)이란 정확하게 정의를 내리기는 어렵지만, 개념적으로는 현존하는 모든 서비스(Voice, Data, Video 등)들과 미래에 나타날 멀티 서비스를 통합하여 수용할 수 있는 패킷 기반의 통신망을 의미한다. 이러한 개념은 망의 통합을 목적으로 하는 BcN(Broadband Convergence Network, 이하 BcN)로 진화하고 있다. 하지만, 진정한 의미의 BcN은 Legacy 회선 교환 방식(include Wireless Network)과 패킷 교환 방식의 모든 망 사용자에게 동일한 서비스를 제공하는 것이며, 이것은 Convergence Service라는 개념으로 정리를 할 수 있다. 본 논문에서는 이와 같은 접근을 Next Generation Convergence Service(이하 NGcS)로 정의를 한다. 논문에서는 NGcS 구축을 위해 지능망 서비스와 연계하여 접근을 할 것이며, INAP(Intelligent Network Application Protocol), WIN(Wireless Intelligent Network) 및 CAP(CAMEL Application Part) 등의 제어방식에 근거한다. 이러한 방식들에 대한 연동에 대해 논하며, NGcS 구축을 위한 Service Switching Function 설계 방법과 서비스를 트리거(Trigger)하기 위한 방법에 대해 논한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.901-905
• /
• 2004

The radio communication telenology has been developed keeping pace with recent informationere. As the personal desire of information is activated highly effcient computers come out. Therefore the network using LAN has set up. This paper about antenna available in wireless LAN of 5GHz band which is compareatively easy therefore designing an antenna having broadband and analyzing it throuth transmission-line models.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.233-236
• /
• 2008

There are several kinds of service standards for 3G($3^{rd}$-Generation) wireless communication as WCDMA, CDMA2000 and WiBro(Wireless Broadband Internet). Especially WiBro Wave2 system is a marked currnt issue. In this paper, we describe on the cell plan tool to desgin WiBro Wave2 network. For this, we treat from basic theory to practical substance to produce new(or modified) path loss prediction model for 2.3GHz. And we explain the method how to implement new technology MIMO(Multiple Input Multiple Output) deployed in Wave2 system. Also we emphasize on the importance of LOS(Line Of Sight) analysis in WiBro network design.