• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.307-312
• /
• 2005

In this paper, the broadband FCMA(Folded Cross Monopole Antenna), which is the cross monopole antenna with the folded element, is presented. To investigate the broadband characteristics of FCMA the VSWR, the gain, and the radiation pattern are calculated in frequency between 1.75 GHz and 2.655 GHz. From the calculated result, it is shown that the presented folded cross monopole antenna has a excellent band characteristics than the existing cross monopole antenna. The presented antenna is conformed as a broadband antenna which can be used for the indoor antenna of PCS, WCDMA, Wibro, and satellite DMB band.

• 한국전자파학회논문지
• /
• 제13권7호
• /
• pp.687-692
• /
• 2002

본 논문에서는 중심주파수가 5.8 GHz에서 동작하는 새로운 급전구조를 갖는 광대역 마이크로스트립 패치 안테나를 설계 및 제작하였다. 제안된 새로운 급전구조인 마이크로스트립 라인-프로브 급전구조는 광대역 특성을 가지며, 안테나의 패치 크기를 줄일 수 있다. 광대역 특성을 확인하기 위해 기존의 프로브 급전 마이크로스트립 패치 안테나와 비교하였으며, 그 결과 대역폭은 34.5 % 증가하였으며, 패치의 크기는 45 % 축소되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.173-176
• /
• 2000

In This paper, a novel broadband monopole antenna is investigated experimentally. Our broadband monopole antenna yields the largest bandwidth from 1.72 ∼ 2.2 GHz ( 24.2 ％ ) for VSWR<1.2 So, this antenna can be designed to extend enough the coverage of dual band(PCS＋IMT-2000). The measurements and computations are confirmed to operating of the our broadband antenna, whose electrical characteristics have an attractive feature as handset communication applications.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.210-213
• /
• 2001

본 논문에서는 광대역 동작을 위한 나비형 안테나의 임피던스 특성을 분석했다. 펄스 표면하 레이더는 지중 매설물에 대한 정보를 수집하기 위하여 임펄스를 사용하므로, 이러한 임펄스의 광대역 특성으로 인하여 급전점에서 발생하는 반사를 최소화할 수 있도록 광대역 정합 특성을 가진 안테나가 사용되어진다. 따라서, 본 논문에서는 광대역 특성을 가지는 나비형 안테나를 Ensemble 5.0으로 분석하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권3호
• /
• pp.204-209
• /
• 2005

A small size broadband microstrip patch antenna with small ground plane has been fabricated using MEMS. Multiple layer substrates are used to realize small size and broadband characteristics. The microstrip patch is divided into 3 pieces and each patch is connected to each other using a metal microstrip line. The fabrication process is simple and only one mask is needed. Two types of microtrip antennas are fabricated. Type A is the micros trip antenna with metal lines and type B is the microstrip antenna without metal lines. The size of proposed microstip antenna is $8^{*}12^{*}2mm^{3}$ and the experimental results show that the antenna type A and type B have the bandwidth of 420 MHz at 5.3 GHz and 480 MHz at 5.66 GHz, respectively.

• 정보통신설비학회논문지
• /
• 제5권1호
• /
• pp.43-59
• /
• 2006

A compact and broadband $4\times1$ array antenna was developed for 3G smart antenna system testbed. The $4\times1$ uniform linear away antenna was designed to operate at 1.885 to 2.2GHz with a total bandwidth of 315MHz. The array elements were based on the novel broadband L-probe fed inverted hybrid E-H (LIEH) shaped microstrip patch, which offers 22% size reduction to the conventional rectangular microstrip patch antenna. For steering the antenna beam, a commercial variable attenuator (KAT1D04SA002), a variable phase shifter (KPH350SC00) with four units each, and the corporate 4-ways Wilkinson power divider which was fabricated in-house were integrated to form the beamforming feed network. The developed antenna has an impedance bandwidth of 17.32% $(VSWR\leq1.5)$, 21.78% $(VSWR\leq2)$ with respect to center frequency 2.02GHz and with an achievable gain of 11.9dBi. The design antenna offer a broadband, compact and mobile solution for a 3G smart antenna testbed to fully characterized the IMT-2000 radio specifications and system performances.

• 정보통신설비학회논문지
• /
• 제7권1호
• /
• pp.41-58
• /
• 2007

A compact and broadband $4{\times}1$ array antenna was developed for 3G smart antenna system testbed. The $4{\times}1$ uniform linear array antenna was designed to operate at 1.885 to 2.2GHz with a total bandwidth of 315MHz. The array elements were based on the novel broadband L-probe fed inverted hybrid E-H (LIEH) shaped microstrip patch, which offers 22% size reduction to the conventional rectangular microstrip patch antenna. For steering the antenna beam, a commercial variable attenuator (KAT1D04SA002), a variable phase shifter (KPH350SC00) with four units each, and the corporate 4-ways Wilkinson power divider which was fabricated in-house were integrated to form the beamforming feed network. The developed antenna has an impedance bandwidth of 17.32% ($VSWR{\leq}1.5$), 21.78% ($VSWR{\leq}2$) with respect to center frequency 2.02GHz and with an achievable gain of 11.9dBi. The design antenna offer a broadband, compact and mobile solution for a 3G smart antenna testbed to fully characterized the IMT-2000 radio specifications and system performances.

• Journal of electromagnetic engineering and science
• /
• 제19권2호
• /
• pp.115-121
• /
• 2019

This paper presents the effects of the position of the split of a split-ring resonator (SRR) on the performance of a composite broadband printed dipole antenna. The antenna is made of two printed dipole arms enclosed by two rectangular and identically printed SRRs. One dipole arm and the SRR are printed on the top side of the substrate, while the other dipole arm and SRR are printed on the bottom side of the same substrate. By changing the position of the split on the SRR, different antenna characteristic values are obtained, namely, for impedance bandwidth and radiation patterns. The split position is thus a critical parameter in antenna design, because it influences the antenna's major performance immensely. Different split positions and their consequences for antenna performance are demonstrated and discussed. The antenna generates linearly polarized radiations, and it is computationally characterized for broadband characteristics. The optimized compact antenna has overall dimensions of 9.6 mm × 74.4 mm × 0.508 mm (0.06λ × 0.469λ × 0.0032λ at 1.895 GHz) with a measured fractional bandwidth of 60.31% (1.32 to 2.46 GHz for |S₁₁| <-10 dB) and a radiation efficiency of >88%.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.227-233
• /
• 2011

This paper describes the development of a broadband quasi-Yagi antenna using a folded dipole driver. The antenna is designed on a low-permittivity substrate to reduce the surface wave effect, and hence the gain can be enhanced easily by adding directors. The folded dipole driver is connected to a 50-${\Omega}$ microstripline via a simple broadband microstrip-to-coplanar stripline transition with a quarter radial stub. The key motivation for the use of a folded dipole is to increase the input impedance at the driver, allowing a smaller mismatch loss between the antenna driver and the coplanar stripline feed. The proposed antenna has a measured bandwidth of 4.67~6.26 GHz for the -10 dB reflection coefficient, and a flat gain of 4.86~5.15 dB within the bandwidth.

• 한국전자파학회논문지
• /
• 제16권7호
• /
• pp.768-775
• /
• 2005

본 논문에서는 십자형 구조를 갖는 광대역 모노폴 안테나를 제시하고 모노폴 소자의 폭과 높이에 따른 복사 특성을 고찰하였다 제시된 모노폴 안테나는 십자형 구조의 복사 소자와 접지판과 소자 사이에 삽입한 임피던스 정합부에 의해 광대역 특성이 실현되었다. 제시된 안테나의 광대역 특성을 확인하기 위하여 주파수 $1.75\~2.655$ GHz에서 안테나를 설계$\cdot$제작하고 복사 특성을 측정하였다. 제시된 안테나는 수평면내 무지향성, 수직면내 지향성 특성을 가지며, VSWR은 사용 주파수 전대역에서 1.5 이하, 안테나 이득은 $2.5\~3.78$ dBi로 나타났다. 측정 결과로부터 제시된 안테나는 PCS, WCDMA, Wibro, 위성 DMB 밴드의 공용 실내 안테나로 사용될 수 있는 광대역 특성을 갖는 안테나로 확인되었다.