• 제목/요약/키워드: broad-band

검색결과 647건 처리시간 0.029초

유리판과 단일방향 탄소섬유강화 플라스틱판에서 점원에 의해 발생된 과도적 탄성파의 주파수 해석 (Spectral Analysis of Transient Elastic Waves Generated by Point Source in Glass and Unidirectional CFRP Plates)

  • 이정기;김호철;최명선;김영환
    • 한국음향학회지
    • /
    • 제13권6호
    • /
    • pp.50-59
    • /
    • 1994
  • 유리판과 단일방향(unidirectional) 탄소섬유 강화 복합재료(CFRP)판의 표면에서 연필심을 부러뜨려 발생된 과도적 탄성파를 음원으로부터 멀리 떨어진 서로 다른 위치에 둔 두개의 탐촉자로 검출하였다. 탐촉자에 검출된 과도적 신호의 스펙트럼 분석에 의해 판에서 pulse 형태로 발생된 신호는 Lamb파 분산관계를 따르며 전파하고, 유리판과 단일방향 CFRP판에서의 과도적 신호는 최저 대칭$(S_{0})$, 1차 대칭$(S_{1})$, 1차 비대칭$(A_{l})$ 모드의 최대 군속도 주변의 성분들로 형성되었다. 이러한 최대 군속도 주변 성분은 분산이 비교적 적기 때문에 과도적 신호의 초기부분은 크게 변화되지 않았으며, $A_{1}$ 모드 단절 (cut-off)주파수 이하 영역의 $S_{0}$ 모드가 가장 빠른 군속도로 전파되고 과도적 신호 형성에 크게 기여하는 모드이었다.

  • PDF

CaNb2O6:RE3+ (RE= Sm, Eu) 형광체의 광학 특성 (Photoluminescence Properties of CaNb2O6:RE3+ (RE= Sm, Eu) Phosphors)

  • 정운환;조신호
    • 한국전기전자재료학회논문지
    • /
    • 제27권7호
    • /
    • pp.477-482
    • /
    • 2014
  • $CaNb_2O_6:RE^{3+}$ (RE=Sm or Eu) phosphor powders were prepared with different contents of activator ions by using solid-state reaction method. The X-ray diffraction patterns exhibited that the phosphors synthesized with different activator ions showed an orthorhombic system with a main (131) diffraction peak. The maximum size of the grain particles, determined from the measurement of scanning electron microscopy, was observed at 0.05 mol of $Eu^{3+}$ ions and at 0.01 mol of $Sm^{3+}$. As for the $Eu^{3+}$-doped phosphor powders, the excitation spectra were composed of a broad band peaked at 278 nm and several weak bands in the range of 350~500 nm, and the highest red emission spectrum was observed at 0.15 mol of $Eu^{3+}$ ions. As for the $Sm^{3+}$-activated phosphor powders, three strong emission bands under excitation at 273 nm were observed at 570, 612, and 659 nm, respectively. The intensities of all the emission bands approached maxima for 0.05 mol of $Sm^{3+}$ ions. The optical properties show that the $Eu^{3+}$- or $Sm^{3+}$-doped $CaNb_2O_6$ powders are promising red-orange emitting phosphor powders applicable to full-color photonic devices.

Gene Cloning and Characterization of an ${\alpha}$-Amylase from Alteromonas macleodii B7 for Enteromorpha Polysaccharide Degradation

  • Han, Xuefeng;Lin, Bokun;Ru, Ganji;Zhang, Zhibiao;Liu, Yan;Hu, Zhong
    • Journal of Microbiology and Biotechnology
    • /
    • 제24권2호
    • /
    • pp.254-263
    • /
    • 2014
  • Enteromorpha polysaccharides (EP) extracted from green algae have displayed a wide variety of biological activities. However, their high molecular weight leads to a high viscosity and low solubility, and therefore, greatly restrains their application. To solve this problem, bacteria from the surface of Enteromorpha were screened, and an Alteromonas macleodii strain B7 was found to be able to decrease the molecular weight of EP in culture media. Proteins harvested from the supernatant of the A. macleodii B7 culture were subjected to native gel electrophoresis, and a band corresponding to the Enteromorpha polysaccharide lyase (EPL) was detected by activity staining. The enzyme identity was subsequently confirmed by MALDI-TOF/TOF mass spectrometry as the putative ${\alpha}$-amylase reported in A. macleodii ATCC 27126. The amylase gene (amySTU) from A. macleodii B7 was cloned into Escherichia coli, resulting in high-level expression of the recombinant enzyme with EP-degrading activity. AmySTU was found to be cold-adapted; however, its optimal enzyme activity was detected at $40^{\circ}C$. The ${\alpha}$-amylase was highly stable over a broad pH range (5.5-10) with the optimal pH at 7.5-8.0. The highest enzyme activity was detected when NaCl concentration was 2%, which dropped by 50% when the NaCl concentration was increased to 16%, showing an excellent nature of halotolerance. Furthermore, the amylase activity was not significantly affected by tested surfactants or the presence of some organic solvents. Therefore, the A. macleodii strain B7 and its ${\alpha}$-amylase can be useful in lowering EP molecular weight and in starch processing.

디지털 애니메이션의 미적구조 연구 -<애니 매트릭스>를 중심으로- (A Study on the Digital Animation Style - Focused on film "Ani-Matrix" -)

  • 이종한
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2004년도 추계 종합학술대회 논문집
    • /
    • pp.121-124
    • /
    • 2004
  • 현대 애니메이션 스타일은 기술에 기반한 여러가지 형식의 중요성과 의미를 재생산함으로써 그 범주와 장르에 있어서 다양해지고, 그에 따라 과학의 지속적인 발전과 그에 따른 대중문화의 파급을 함께 해온 컴퓨터 애니메이션은 현대시각미술생산에 중요한 위치를 점하고 있다. 본 연구는 매트릭스 세계에 대한 서로 다른 9개의 에피소드로 구성되어 있는 <애니 매트릭스>를 사실주의 미학의 관점에서 재현과 리얼리티라는 문제와 연관지어 그 표현방식을 기술성의 미학적 측면과 전통적인 영화표현기법 측면으로 분석한다. 또한 포스트모더니즘의 영향으로 제기되는 리얼리티에 대한 재해석과 <애니 매트릭스>가 담고 있는 철학적 메시지와 애니메이션 스타일과의 상호연관성을 분석하여 컴퓨터애니메이션 영상장르의 미학적 구조와 효과, 그리고 그에 따르는 애니메이션 스타일 형성에 대해 조망하고자 한다.

  • PDF

Eu2+ 이온을 도핑한 LaCl3 결정의 섬광 특성 (Scintillation Properties of Eu2+ ions doped LaCl3 Crystal)

  • 김성환
    • 한국산학기술학회논문지
    • /
    • 제12권2호
    • /
    • pp.600-604
    • /
    • 2011
  • 본 Czochralski 방법으로 새로운 섬광체인 $LaCl_3:Eu^{2+}$ 결정을 육성하고, 육성된 섬광체의 섬광 특성을 조사하였다. 육성한 $LaCl_3:Eu^{2+}$ 결정 구조는 육방정계로서 $P_63$/m 공간군에 속함을 확인할 수 있었으며, 격자상수는 각각 a = b = $7.48{\AA}$, c = $4.37{\AA}$이었다. 335 nm로 여기시킨 $LaCl_3:Eu^{2+}$ 결정의 발광 스펙트럼 파장 범위는 약 370 ~ 640 nm 이었으며, 중심 파장은 430 nm이었다. 형광 감쇠 곡선은 $2.82{\pm}0.72{\mu}s$의 단일 성분으로 구성되었으며, $^{137}Cs$ 662 keV ${\gamma}$-선에 대한 에너지 분해능은 약 8.8%이었다.

AOA 기법을 이용한 재머 위치추적시스템 설계 (Design of a Jammer Localization System using AOA method)

  • 임덕원;최윤섭;이상정;허문범;남기욱
    • 한국항행학회논문지
    • /
    • 제15권6호
    • /
    • pp.1241-1249
    • /
    • 2011
  • 위치가 고정된 다수의 수신기를 이용하여 전파 송신기의 위치를 추정하는 기법으로 TOA, TDOA, AOA 기법이 있다. 이 중 TOA 기법은 송신기와 수신기의 시각이 동기 되었을 경우에만 적용할 수 있고, TDOA 기법은 광대역 신호에만 적용할 수 있으므로 재머의 위치를 추적하기 위해서는 AOA 기법을 적용하는 것이 적합하다. 따라서 본 논문에서는 AOA 측정치의 특성을 분석하고, 시스템 설계 파라미터에 따른 측위성능 민감도를 분석하였다. 분석한 결과를 토대로 하여 목표 성능을 만족시킬 수 있는 재머 위치추적시스템을 설계하였고, 모의실험을 통하여 10km거리의 재머에 대한 위치추적 오차가 38m보다 작게 나타나는 것을 확인하였다.

LED-TV용(用) 전원장치에 적합한 Hybrid 초크 코일의 특성 해석에 관한 연구 (A Study on the Characteristic Analysis of Hybrid Choke Coil suitable for LED-TV SMPS)

  • 김종해;김희승;원재선
    • 조명전기설비학회논문지
    • /
    • 제28권3호
    • /
    • pp.32-43
    • /
    • 2014
  • This paper presents the intra capacitance modeling according to the winding method, section bobbin and coil structure for hybrid choke coil capable of the EMI attenuation of broad bands from lower frequency bands to higher frequency bands and high frequency type common-mode choke coil capable of the EMI attenuation of high frequency band used in the EMI Block of LED-TV SMPS. In case of high frequency type CM choke coil, it can be explained the parasitic capacitance of A type and section bobbin type winding methods among them is much smaller than the other. The first resonant frequency of the proposed CM choke coil tends to increase as the parasitic capacitance becomes small and its impedance characteristics also show improved performance as the first resonant frequency increases. In case of hybrid choke coil using rectangular copper wire, it has investigated its parasitic capacitance compared to CM choke coil of conventional toroidal type becomes small. Also it has confirmed through the experiment results that CE margin and RE margin in frequency bands 0.5MHz to 5MHz and 30MHz to 200MHz are respectively 10dB and 15dB greater than that of conventional type in case of one stage EMI filter structure adopting hybrid choke coil compared to two stage EMI Filter structure using two of each CM choke coil used in the lower and higher frequency bands or two of CM choke coil used in only the lower frequency bands. In the future, the hybrid choke coil and CM choke coil of high frequency type show it can be practically used in not only LED/LCD-TV SMPS but also several applications such as LED Lighting, Laptop Adapter, Server Power Supply and so on.

초고속정보통신망에서의 최적 가입자망을 위한 경제성 분석 및 설계 (Design and Analysis of Tech-Economic for Optimized Access Network over Information Super Highway)

  • 장종욱;이계상;이정태
    • 한국정보처리학회논문지
    • /
    • 제4권6호
    • /
    • pp.1589-1600
    • /
    • 1997
  • 광케이블에 의한 가입자 엑세스 망의 구성은 투자비면에서 볼 때 40~50% 이상의 많은 비용이 소요되는 부분으로 이 분야의 최적화는 광대역 종합정보통신망 구축의 핵심 분야이다. 따라서 선진 각국에서는 이에 대한 연구를 활발히 진행하고 있다. 그러므로 본 논문에서는 가장 보편적으로 이용될 수 있는 이중 성형 구조의 광가입자 엑세스 망 구조 중 HFC, ATM-PON/FTTC 그리고 Super PON 구조를 가지고 경제성 분석을 하였다. 경제성 분석을 위한 비교인자로는 투자비, 유지 보수비, 내용 년수 및 잔존가 등 광가입자 엑세스 망을 구축하기 위해 소요되는 여러가지 장비들을 선택하여 정적 비교 분석법을 TITAN 모델에 적용시켜 소요비용을 산출한 결과 ATM-PON/FTTC 구조가 가장 경제적인 구조로 판명되었다. 이것은 통신망 사업자의 가입자망 구조 결정시에 가이드 라인이 될 수 있다.

  • PDF

2차원 전기영동법을 이용한 Brucella abortus 세포외막 특이단백질의 분석 (Analysis of outer mombrane proteins of Brucella abortus using two dimensional polyacrylamide gel electrophoresis)

  • 김병수;김선희;김종석;백병걸
    • 대한수의학회지
    • /
    • 제38권2호
    • /
    • pp.328-335
    • /
    • 1998
  • Outer membrane proteins(OMPs) of Brucella abortus 1119-3 strain were extracted by Triton X-100 treatment, and fractionated by DEAE-cellulose column chromatography and Sephacryl S-300 column chromatography. The antigenic proteins in these fractions were identified by Western blot analysis. In Western blot analysis, a single band(38kDa) was observed in the DEAE fractions from 36th fraction to 38th fraction against sera of cattle infected with B abortus. And other fractions have several bands. However, the Sephacryl S-300 fractions exhibited a total of 3 peaks of proteins with a broad range from about 30 to 116kDa. In order to characterize further, the extracted OMPs and the DEAE fractions were analyzed by two dimensional polyacrylamide gel electrophoresis(2-DE) and Western blot using serum from naturally infected cattle with Brucella spp. The 2-DE immunoblots of DEAE fraction showed immunoreactive spots more than twenty two. The major protein spots have ranging from about 32 to 47kDa. The pI values of the spots were detected from pH 4.7 to 5.4. Among the major protein spots, the 38kDa protein which is a specific antigen, located at the point of approximately a pI 4.8.

  • PDF

InGaN UV bare칩을 이용한 $CaAl_{12}O_{19}:Mn^{4+}$ 형광체의 적색 발광다이오드 제조 (Fabrication of Red LED with Mn activated $CaAl_{12}O_{19}$ phosphors on InGaN UV bare chip)

  • 강현구;박정규;김창해;최승철
    • 마이크로전자및패키징학회지
    • /
    • 제14권4호
    • /
    • pp.87-92
    • /
    • 2007
  • [ $CaAl_{12}O_{19}:Mn^{4+}$ ] 적색 형광체는 $Mn^{4+}$이온이 0.02 mol 첨가되었을 때 최대 발광 세기가 관찰되었고 $1600^{\circ}C$, 3시간 소성조건에서 우수한 결정성과 발광 효율을 나타내며 중심 파장이 658 nm에서 관찰되었다. 본 연구에서 개발된 $CaAl_{12}O_{19}:Mn^{4+}$ 형광체를 에폭시와 함께 1:3으로 혼합하여서 InGaN UV 발광체의 Bare 칩 위에 코팅하여 중심파장이 658 nm인 적색 LED를 제조하였다. 적색 형광체를 이용하여, 기존의 UV LED를 여기 광원으로 다양한 느낌의 백색 발광체를 설계 할 수 있을 것이다.

  • PDF