• Structural Engineering and Mechanics
• /
• 제51권1호
• /
• pp.131-140
• /
• 2014

This study focuses on seismic behaviour of tall piers characterized by high slender ratio. Two analysis models were developed based on elastic-plastic hinged beam element and elastic-plastic fiber beam element, respectively. The effect of the division density of elastic-plastic hinged beam element on seismic demand was discussed firstly to seek a rational analysis model for tall piers. Then structural seismic behaviour such as the formation of plastic hinges, the development of plastic zone, and the displacement at the top of the tall piers were investigated through incremental dynamic analysis. It showed that the seismic behaviour of a tall pier was quite different from that of a lower pier due to higher modes contributions. In a tall pier, an additional plastic zone may occur at the middle height of the pier with the increase of seismic excitation. Moreover, the maximum curvature reaction at the bottom section and maximum lateral displacement at the top turned out to be seriously out of phase for a tall pier due to the higher modes effect, and thus pushover analysis can not appropriately predict the local displacement capacity.

• Structural Engineering and Mechanics
• /
• 제77권3호
• /
• pp.343-354
• /
• 2021

The frequencies formulas of the bridge are of great importance in the design process since these formulas provide insight dynamic characteristics of the structure, which guides the designers to parametric analyses and the layout of the bridge in conceptual or preliminary design. Continuous rigid frame bridge is popular in the mountainous area. Mostly, this type of bridge was simplified either as a girder or cantilever when calculating the frequency, however, studies showed that the different configuration of the bridge made the problem more complex, and there is no unified fundamental calculation pattern for this kind of bridge. In this study, an empirical frequency equation is proposed as a function of pier's height, stiffness of pier and the weight of the structure. A unified fundamental frequency formula is presented based on the energy principle, then the typical continuous rigid frame bridge is investigated by finite element method (FEM) to study the dynamic characteristics of the structure, and then several key parameters are investigated on the effect of structural frequency. These parameters include the number, position and stiffness of the tie beam. Nonlinear regression analyses are conducted with a comprehensive statistical study from plenty of engineering structures. Finally, the proposed frequency equation is validated by field test results. The results show that the fundamental frequency of the continuous rigid frame bridge increases more than 15% when the tie beams are set, and it increases with the stiffness ratio of tie beam to pier. The results also show that the presented unified fundamental frequency has an error of 4.6% compared with the measured results. The investigation can predicate the approximate longitudinal fundamental frequency of continuous ridged frame bridge, which can provide reference for the seismic response and dynamic impact factor design of the pier.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2003년도 추계학술발표회
• /
• pp.59-65
• /
• 2003

시계 불량시 교량하 항로를 교각과 충돌없이 안전하게 통항하기 위하여 충분히 떨어진 곳에서 레이더로 교각을 탐지하는 것이 매우 중요하다. 본 연구에서는 이론 검토 및 레이더 실험을 통하여 교각인식을 위하여 필요한 교각 돌출량을 도출하였다. 교량하 항로를 통과하는 최대선박의 전장과 통항조건별로 필요치를 제시함으로써 교량 설계시 그 해역의 교통 환경에 적합한 교각방호시설의 설계가 가능하도록 하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1188-1195
• /
• 2007

The vertical forces in rail fasteners at areas of bridge transitions near the embankment and on the pier will occur due to different deformations of adjoining bridges caused by the trainloads, the settlement of supports, and the temperature gradients. The up-lifting forces is not large problem in the blast track because the elasticity of blast and rail pad buffs up-lifting effect. But, it is likely to be difficult to ensure the serviceability of the railway and the safety of the fastener in the end in that concrete slab track consist of rail, fastener, and track in a single body, delivering directly the up-lifting force to the fastener if the deck is bended because of various load cases, such as the end rotation of the overhang due to the vertical load, the bending of pier due to acceleration/braking force and temperature deviation, the settlement of embankment and pier, the temperature deviation of up-down deck and front-back pier, and the rail deformation due to wheel loads. The analysis of the rail fastener is made to verify the superposed tension forces in the rail fastener due to various load cases, temperature gradients and settlement of supports. The potential critical fasteners with the highest uplift forces are the fastener adjacent to the civil joint. The main influence factors are the geometry of the bridge such as, the beneath length of overhang, relative position of bridge bearing and fastener, deflection of bridge and the vertical spring stiffness of the fastener.

• Geomechanics and Engineering
• /
• 제21권1호
• /
• pp.73-84
• /
• 2020

In the seismic design of bridges, formation of plastic hinges plays an important role in the dissipation of seismic energy. In the case of conventional fixed-base bridges, the plastic hinges are allowed to form in the superstructure alone. During seismic event, such bridges may be safe from collapse but the superstructure undergoes significant plastic deformations. As an alternative design approach, the plastic hinges are guided to form in the soil thereby utilizing the inevitable yielding of the soil. Rocking foundations work on this concept. The formation of plastic hinges in the soil reduces the load and displacement demands on the superstructure. This study aims at evaluating the seismic response of bridge pier supported on rocking shallow foundation. For this purpose, a BNWF model is implemented in OpenSees platform. The capability of the BNWF model to capture the SSI effects, nonlinear behavior and dynamic loading response are validated using the centrifuge and shake table test results. A comparative study is performed between the seismic response of the bridge pier supported on the rocking shallow foundation and conventional fixed-base foundation. Results of the study have established the beneficial effects of using the rocking shallow foundation for the seismic response analysis of the bridge piers.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1577-1582
• /
• 2011

Recently rapid construction of bridge is a main interest in construction. A research on rapid construction of pier coping is urgently needed because pier, which is a bridge understructure, directly affect lane reduction and increase of social cost. Precast assembly method and pre-assembly method are the main subjects of rapid construction. But these researches have focused not on reduction of reinforcement amount, but on modifying production method of coping. Reinforcement amount of design specification is as much as that of coping under constructing. So different approach is needed for reduction of reinforcement amount. In this paper, design of pier coping using strut-tie model was proposed for reduction of reinforcement amount and improvement of constructability. Railway bridge pier coping under constructing was analyzed using a finite element method and designed using strut-tie model.

• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5716-5720
• /
• 2015

본 연구는 연구(I)의 교각의 기하학적 형태에 따른 수리특성을 바탕으로 배수위 영향구간을 분석하고자 2차원 모형(RMA-2)과 1차원 모형(HEC-RAS)을 적용하였다. 교각형상은 교각 설치전을 포함하여 총 6개(사각형, 마름모, 팔각형, 타원형, 원형)로 구분하였으며 배수위 영향구간 분석결과 HEC-RAS의 경우 배수위 영향구간이 약 150m~200m, RMA-2모형의 경우 모든 교각형상에서 약 50m의 배수위 영향구간을 보였다. RMA-2모형의 결과는 HEC-RAS의 결과와 직접적인 비교에는 어려움이 있었으나 타원형의 수리특성이 설치전과 유사한 결과를 보이고 있어 교각 설치시 타원형이 가장 안정적인 교각이라 판단되며, 향후 신설교량설치 및 교각형상 선정시 도움을 줄 수 있을 것으로 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권5호
• /
• pp.87-95
• /
• 2014

사장교는 다수의 케이블에 의해 지지되어 복잡한 거동을 하는 구조체이며, 측경간 케이블에 의해 단부교각에서 부반력이 발생한다. 이를 해결하기 위해 적절한 측경간비를 설정해야 하고 앵커교각의 부반력 대책을 강구해야 한다. 부반력 제어 대책으로는 중간교각, 카운터 웨이트 등을 설치하는 방안이 있으며 이에 따라 사장교의 구조계가 결정된다. 밤콩교량은 타당성 검토 단계에서 5경간 사장교로 계획되었다. 하지만 시공성 및 경제성 등의 문제로 실시설계 단계에서 3경간 사장교로 변경되었다. 시공성을 확보하기 위하여 중간교각을 배제하였고, 이에 따른 부반력을 제어하기 위해 측경간비를 증가시켰다. 그 결과, 원안 설계에 비하여 시공성, 구조적 안전성, 효율성을 확보할 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권4호
• /
• pp.169-176
• /
• 2005

선박충돌의 위험이 있는 교량의 교각에 대해 연파괴빈도 계산을 수행하였다. 이러한 해석을 통해 각각의 교각에 대한 선박충돌 횡방향내하력을 결정할 수 있다. 교각의 횡방향내하력은 선박충돌 위험도 평가로부터 예측된 연파괴빈도와 허용기준을 비교하는 확률기반 해석과정을 통해 결정된다. 해석과정은 교량 각 부재요소에 대한 초기 충돌저항력을 가정하여 계산된 연파괴빈도가 허용기준을 만족하도록 해석변수를 반복 수정하면서 해를 찾는 과정이다. 일반적으로 선박충돌 위험이 있는 교각들에 대한 연파괴빈도 허용기준의 분배는 설계자의 공학적 판단에 근거한다. 본 연구에서는 선박충돌 위험도 평가로부터 사전 계산되는 연파괴빈도 할당 가중치에 의해 각각의 교각에 허용기준을 분배하였다.

• Computers and Concrete
• /
• 제18권5호
• /
• pp.1041-1051
• /
• 2016

In this study, the construction of a reinforced concrete bridge pier was analyzed from durability point of view. The goal of the study is to analyze the crack iniation condition due to construction and present some recommendations for construction conditions of the reinforced concrete bridge pier. The bridge is located at the western port area of Shenzhen, where the climate is high temperature and humidity. To control the cracking of concrete, a construction simulation was carried out for a heat transfer problem as well as a thermal stress problem. A shrinkage model for heat produced due to cement hydration and a Burger constitutive model to simulate the creep effect are used. The modelling based on Femmasse(C) is verified by comparing with the testing results of a real underground abutment. For the bridge pier, the temperature and stress distribution, as well as their evolution with time are shown. To simulate the construction condition, four initial concrete temperatures ($5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$, $20^{\circ}C$) and three demoulding time tips (48h, 72h, 96h) are investigated. From the results, it is concluded that a high initial concrete temperature could result in a high extreme internal temperature, which causes the early peak temperature and the larger principle stresses. The demoulding time seems to be less important for the chosen study cases. Currently used 72 hours in the construction practice may be a reasonable choice.