• Steel and Composite Structures
• /
• 제29권2호
• /
• pp.219-229
• /
• 2018

This paper presents an analytical model to analyze the mapping relationship between bridge lateral deformation and track geometry of high-speed railway. Based on the rail deformation mechanisms, the deformation of track slab and rail at the locations of fasteners are analyzed. Formulae of rail lateral deformation are derived and validated against a finite element model. Based on the analytical model, a rail deformation extension coefficient is presented, and effects of different lateral deformations on track geometry are evaluated. Parametric studies are conducted to evaluate the effects of the deformation amplitude, fastener stiffness and mortar layer stiffness on the rail deformation. The rail deformation increases with the deformation of the girder, and is dependent on the spacing of the fasteners, the elastic modulus of the rail's material, and the moment of inertia of the rail's section.

• 한국항만학회지
• /
• 제14권1호
• /
• pp.115-124
• /
• 2000

This study is a suggest a measurement method of lateral displacement, which can be used to judge the stability of bridge abutment on soil undergoing lateral movement. The abutment of bridge on soft foundation makes lateral movement due to the settlement of back fill and lateral flow. To measure the displacement of such a abutment, there are a lot of indirect method for measurement such as survey of leveling or inclinometer gauge around the abutment. But all of them are not sufficient to confirm the ground behavior and measure the exact lateral behavior of structure. As making the structure and pile cooperatively by measuring the movement of lateral displacement, for measuring the abutment displacement precisely by using the inclinometer. In this work, we try to suggest efficient measuring method of abutment displacement and its application.

• Steel and Composite Structures
• /
• 제46권1호
• /
• pp.93-105
• /
• 2023

This paper examines a high-speed railway CRTS-II ballastless track-bridge system. Using the stationary potential energy theory, the mapping analytical solution between the bridge deformation and the rail vertical geometric irregularity was derived. A theoretical model (TM) considering the nonlinear stiffness of interlayer components was also proposed. By comparing with finite element model results and the measured field data, the accuracy of the TM was verified. Based on the TM, the effect of bridge deformation amplitude, girder end cantilever length, and interlayer nonlinear stiffness (fastener, cement asphalt mortar layer (CA mortar layer), extruded sheet, etc.) on the rail vertical geometric irregularity were analyzed. Results show that the rail vertical deformation extremum increases with increasing bridge deformation amplitude. The girder end cantilever length has a certain influence on the rail vertical geometric irregularity. The fastener and CA mortar layer have basically the same influence on the rail deformation amplitude. The extruded sheet and shear groove influence the rail geometric irregularity significantly, and the influence is basically the same. The influence of the shear rebar and lateral block on the rail vertical geometric irregularity could be negligible.

• 한국산학기술학회논문지
• /
• 제11권5호
• /
• pp.1799-1804
• /
• 2010

연약지반 위에 설치된 교대나 옹벽과 같이 성토재하중을 받는 구조물은 연약지반의 과도한 변형 때문에 지반이 수평방향으로 이동하는 측방유동 현상이 발생할 수 있고 이로 인해 많은 피해가 발생할 수 있다. 이 연구에서는 원심모형시험을 이용하여 현장에서 교대 배면부 성토시 발생할 수 있는 교대 측방유동여부를 판단하였고, 교대측방유동에 대한 대책공법으로 압성토 공법을 적용하여 공법적용 후 지반과 교대 구조물에 대한 안정성 여부를 FEM(Finite Element Method)프로그램인 MIDAS/GTS를 이용하여 검토하였다. 원심모형시험 결과 현장에서 예측되는 교대의 수평변위는 허용치(15mm)를 초과하여 발생하였으며, 대책공법으로 압성토 공법 적용할 때 교대는 측방유동에 대해 안정하다는 사실을 수치해석을 통해 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제21권4호
• /
• pp.375-392
• /
• 2005

Cable supported structures offer an elegant and economical solution for bridging over long spans with resultant low material content and ease of construction. In this paper, a model of shallow cable supported footbridge with reverse profiled pre-tensioned cables is treated and its load deformation characteristics under different quasi-static loads are investigated. Effects of important parameters such as cable sag and pre-tension are also studied. Numerical results performed on a 3D model show that structural stiffness of this bridge (model) depends not only on the cable sag and cross sectional areas of the cables, but also on the pre-tension in the reverse profiled cables. The tension in the top supporting cables can be adjusted to a high level by the pre-tension in the reverse profiled bottom cables, with the total horizontal force in the bridge structure remaining reasonably constant. It is also evident that pre-tensioned horizontally profiled cables can greatly increase the lateral horizontal stiffness and suppress the lateral horizontal deflection induced by eccentric vertical loads.

• Steel and Composite Structures
• /
• 제43권2호
• /
• pp.165-183
• /
• 2022

Most transportation departments have recognized and developed procedures to address the ever-increasing weights of trucks traveling on bridges in a service today. Transportation agencies also recognize the issues with overheight vehicles' collisions with bridges, but few stakeholders have definitive countermeasures. Bridges are becoming more vulnerable to collisions from overheight vehicles. The exact response under lateral impact force is difficult to predict. In this paper, nonlinear impact analysis shows that the degree of deformation recorded through the modeling of the unprotected vehicle-girder model provides realistic results compared to the observation from the US-61 bridge overheight vehicle impact. The predicted displacements are 0.229 m, 0.161 m, and 0.271 m in the girder bottom flange (lateral), bottom flange (vertical), and web (lateral) deformations, respectively, due to a truck traveling at 112.65 km/h. With such large deformations, the integrity of an impacted bridge becomes jeopardized, which in most cases requires closing the bridge for safety reasons and a need for rehabilitation. We proposed different sacrificial cushion systems to dissipate the energy of an overheight vehicle impact. The goal was to design and tune a suitable energy absorbing system that can protect the bridge and possibly reduce stresses in the overheight vehicle, minimizing the consequences of an impact. A material representing a Sorbothane high impact rubber was chosen and modeled in ANSYS. Out of three sacrificial schemes, a sandwich system is the best in protecting both the bridge and the overheight vehicle. The mitigation system reduced the lateral deflection in the bottom flange by 89%. The system decreased the stresses in the bridge girder and the top portion of the vehicle by 82% and 25%, respectively. The results reveal the capability of the proposed sacrificial system as an effective mitigation system.

• Geomechanics and Engineering
• /
• 제34권1호
• /
• pp.87-102
• /
• 2023

The cover plate and the building loads often make the semi-covered deep excavations with existing buildings bearing asymmetric load, presenting different deformation characteristics with normal excavations, which is not absolutely clear in current studies. Based on a typical engineering, the building storeys, the basement storeys, the pile length, the existence of the cover plate (CP) and the depth of the diaphragm walls (DW) were selected as variables, and 44 groups of simulation were designed to study the influence of existing buildings and the semi-covered supporting system on the deformation of the excavations. The results showed that the maximum lateral displacement of DW, δ_hm, and the depth of δ_hm, H_m, are affected seriously by the building storeys and the basement storeys. Asymmetric structures and loading lead to certain lateral displacement of DW at the beginning of excavation, resulting in different relationships between δ_hm and excavation depth, H. The maximum surface settlement outside the pit, δ_vm, increases significantly and the location, d_m, moves away from the pit with the building storeys increases. δ_vm has a quadratic correlation with H due to the existing buildings. CP and building load will affect the style of the lateral displacement curve of DW seriously in different aspects.

• 콘크리트학회논문집
• /
• 제27권4호
• /
• pp.377-385
• /
• 2015

PSC I 거더의 장경간화는 단면의 세장비와 자중의 영향 등을 증가시켜 거더의 횡적 불안정에 대한 위험성을 높였다. 특히 최근에는 시공 중 거더의 전도 붕괴사고가 증가하고 있어 거더의 횡적 불안정성에 대한 평가 기술이 절실히 요구되고 있다. 따라서, 본 연구에서는 시공 중 전도 붕괴의 한 원인으로 판단되어지고 있는 풍하중에 대하여 PSC I 거더의 횡방향 거동 특성과 안정성을 평가하였다. 거더의 횡방향 불안정성은 주로 거더의 길이와 받침의 강성 변화에 의해 영향을 받는다. 해석결과에 의하면 거더의 경간장이 증가함에 따라 거더의 횡적 불안정성을 유발할 수 있는 임계 풍하중은 감소하고, 거더의 변형과 회전각, 받침의 회전각은 모두 증가하였다. 최종적으로 시공 시 PSC I 거더의 임계 풍하중과 임계 횡변위량을 계산할 수 있는 해석식을 제시함으로써, 시공 시 거더의 횡적 안정성을 유지하기 위한 정량적 관리 수치를 제공할 수 있으리라 판단된다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 춘계학술대회논문집
• /
• pp.82-90
• /
• 2000

The abutment of bridge on soft foundation makes lateral movement due to the settlement of back fill and lateral flow. To measure the displacement of such a abutment, there are a lot of indirect method for measurement such as survey of leveling or inclinometer gauge around the abutment. But all of them are not sufficient to confirm the ground behavior and measure the exact lateral behavior of structure. As making the structure and pile cooperatively by measuring the movement of lateral displacement, for measuring the abutment displacement precisely by using the incliinometer. In this work, we try to suggest efficient measuring method of abutment displacement and its application.

• 토지주택연구
• /
• 제12권3호
• /
• pp.97-108
• /
• 2021

교대구조물에서는 교대 배면의 성토체 축조로 인한 수평방향응력의 증가로 인한 측방유동문제 및 구조물에 작용하는 온도하중 등의 영향으로 인해 접속슬래브, 거더, 베어링등의 파손이 빈번히 발생되고 있는 실정이다. 이에 대한 대책공법으로 보강토 일체형 교대(GRS (Geosynthetic-Reinforced Soil) integral bridge)가 제안되었다. 보강토 일체형 교대는 GRS 보강토 옹벽과 일체형 교대의 구조형식을 혼합한 형태의 구조물이다. 본 연구에서는 기존 PSC 거더교, 기존 보강토 일체형 교대 및 브라켓형 보강토 일체형 교대(새롭게 개발된 LH형 GRS 보강토 교대)의 시공순서와 지진하중조건을 고려하여 수치해석을 실시하였다. 그 결과 브라켓형 보강토 일체형 교대가 다른 구조물에 비해 응력집중과 교대·뒷채움간 부등침하 영향에 의한 기초지반의 변형에 대해 가장 유리한 것으로 파악되었다. 더 나아가 GRS 보강토 일체형 교대(브라켓형 포함) 구조물은 내진안정성에서도 가장 안정한 것으로 파악되었다.