• 기술사
• /
• 제16권4호
• /
• pp.4-14
• /
• 1983

when one is designing a continuous bridge with variable cross sections, it is very troublesome to integrate explicitly load terms and various factor under consideration so that it has different moment of inertia at each cross section. In this paper to obtain the influence line of a arbitary-span continuous beam with variable cross sections, the value of some particular function due to a load at any point can be carried out by numerical integration instead of definite integral. The ordinate of the influence line equals the product of the magnitude of the final moment at each support due to unit moment at any support and the load terms due to unit load, measured at the point of application of the load. It is concluded that this method can be easily used to design continuous bridges with arbitary cross sections.

• Steel and Composite Structures
• /
• 제49권5호
• /
• pp.473-486
• /
• 2023

A through-railway bridge with an inclined girder has recently been applied to optimize the cross-section of a slender bridge structure in railway bridges. To achieve the additional cross-section optimization effect by the bolted end-plate connection, it is necessary to investigate the application of the bolted end-plate tension connection between the inclined girder and the crossbeam. This basic study was conducted on the application of the bolted end-plate moment connection of crossbeams to half-through girders with inclined webs. The combined behavior of vertical deflection and rotational behavior was observed due to the effect of the web inclination in the inclined girder where the steel crossbeam was connected to the girder by the bolted end-plate moment connection. Therefore, in the experiment, the deflection of the inclined girder was 1.77-2.93 times greater than that of the vertical girder but the lateral deflection of the inclined girder was 0.4 times less than that of the vertical girder. Moreover, the tensile stress of the upper bolts in the inclined girder with low crossbeams was clearly 0.81 times lower than that of the vertical girder. According to the results, the design formula for vertical girders does not reflect the influence of the web inclination. Therefore, this study proposed the design procedures for the inclined girder to apply the bolted end-plate moment connection of the crossbeam to the inclined girder by reflecting the design change factors according to the effect of the web inclination.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.368-375
• /
• 2003

The objectives of this study were to provide experimental data on the behavior of interlocking spiral columns under cyclic loading, to compare the performance of columns with interlocking spirals to columns with U-type hoops with hook, to study the flexural detailing of interlocking spirals and other transverse steel configurations as the transverse reinforcement The oblong columns with interlocking spirals and with hooked U-type hoops and cross-ties better seismic performance than the rectangular columns with rectangular hoops and cross-ties. The oblong columns with hooked U-type hoops and cross-ties showed better seismic performance than the rectangular columns with rectangular hoops and cross-ties. And this research were to make recommendations for the design of bridge columns incorporating interlocking spirals and U-type hoops with hook as the transverse reinforcement.

• Ocean Systems Engineering
• /
• 제11권1호
• /
• pp.43-58
• /
• 2021

In the present work, a 3D numerical model is proposed to study local scouring around single vertical piers with different cross-section shapes under steady-current flow. The model solves the flow field and sediment transport processes using a coupled approach. The flow field is obtained by solving the Unsteady Reynolds Averaged Navier-Stokes (URANS) equations in combination with the k-ω SST turbulence closure model and the sediment transport is considered using both bedload and suspended load models. The proposed model is validated against the empirical measurements of local scour around single vertical piers with circular, square, and diamond cross-section shapes obtained from the literature. The measurement of scour depth in equilibrium condition for the simulations reveal the differences of 4.6%, 6.7% and 13.1% from the experimental measurements for the circular, square, and diamond pier cases, respectively. The model displayed a remarkable performance in the prediction of scour around circular and square piers where horseshoe vortices (HSVs) have a leading impact on scour progression. On the other hand, the maximum deviation was found in the case of the diamond pier where HSVs are weak and have minimum impact on the formation of local scour. Overall, the results confirm that the prediction capability of the present model is almost independent of the strength of the formed HSVs and pier cross-section shapes.

• 한국재난정보학회 논문집
• /
• 제15권4호
• /
• pp.626-633
• /
• 2019

연구목적 : 동일한 단면 2차 모멘트를 갖는 곡선 거더의 형상 변화에 따른 곡선 교량의 확률론적 안전성 평가인 지진 취약도 평가를 수행하고자 한다. 연구방법 : I, T, Box Shape 단면을 갖는 곡선 교량을 유한 요소 모델로 구축하였으며 경주 및 포항지진을 포함하여 24개의 입력지진을 적용하여 지진 취약도 평가를 수행하였다. 연구결과 : 거더의 응력에 대한 지진 취약도의 경우 T-Shpae 거더에서 가장 큰 파괴확률이 나타났으며 수평변위에 대한 지진 취약도의 경우 3개의 곡선 교량에서 비슷하게 발생하는 것으로 나타났다. 결론 : 3개의 곡선 교량에 대한 지진 취약도 분석을 수행하였으며 비틀림 저항이 가장 큰 Box-Shape 거더의 파괴확률이 가장 낮은 것으로 나타났다. 추후 연구에서는 추가적인 매개변수를 고려하여 지진 취약도 평가를 수행하고자한다.

• Structural Engineering and Mechanics
• /
• 제13권5호
• /
• pp.505-532
• /
• 2002

In this study, the analysis of high-speed vehicle-bridge interactions by a simplified 3-dimensional finite element model is performed. Since railroads are constructed mostly as double tracks, there exists eccentricity between the vehicle axle and the neutral axis of cross section of a railway bridge. Therefore, for the more efficient and accurate vehicle-bridge interaction analysis, the analysis model should include the eccentricity of axle loads and the effect of torsional forces acting on the bridge. The investigation into the influences of eccentricity of the vehicle axle loads and vehicle speed on vehicle-bridge interactions are carried out for two cases. In the first case, only one train moves on its track and in the other case, two trains move respectively on their tracks in the opposite direction. From the analysis results of an existing bridge, the efficiency and capability of the simplified 3-dimensional model for practical application can be also verified.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권6호
• /
• pp.102-111
• /
• 2022

본 논문의 목적은 팔각형 중공단면 철근콘크리트 교각의 내진성능을 평가하고 축방향철근비가 파괴거동에 미치는 영향을 분석함에 있다. 축소모형 팔각형 중공단면 기둥 실험체 4개를 제작하여 일정한 축력 하에서 반복 횡하중을 가력하는 실험을 수행하였다. 모든 실험체의 횡방향 나선철근 체적비는 0.206%로 일정하고 축방향철근비는 2.36 ~ 4.71%이다. 파괴거동과 내진성능을 분석하였고 겹침이음 실험체를 제외한 3개의 실험체는 최종단계에서 휨-전단 파괴거동을 보였다. 겹침이음 실험체를 제외한 실험결과에서 변위연성도와 누적 에너지소산 능력이 축방향철근비에 반비례하여 감소하는 경향을 나타내었다.

• Wind and Structures
• /
• 제12권5호
• /
• pp.413-424
• /
• 2009

A series of wind tunnel free-decay sectional model dynamic tests were conducted to examine the effects of torsional-to-vertical natural frequency ratio of 2DOF bridge dynamic systems on the aerodynamic and dynamic properties of bridge decks. The natural frequency ratios tested were around 2.2:1 and 1.2:1 respectively, with the fundamental vertical natural frequency of the system held constant for all the tests. Three 2.9 m long twin-deck bridge sectional models, with a zero, 16% (intermediate gap) and 35% (large gap) gap-to-width ratio, respectively, were tested to determine whether the effects of frequency ratio are dependent on bridge deck cross-section shapes. The results of wind tunnel tests suggest that for the model with a zero gap-width, a model to approximate a thin flat plate, the flutter derivatives, and consequently the aerodynamic forces, are relatively independent of the torsional-to-vertical frequency ratio for a relatively large range of reduced wind velocities, while for the models with an intermediate gap-width (around 16%) and a large gap-width (around 35%), some of the flutter derivatives, and therefore the aerodynamic forces, are evidently dependent on the frequency ratio for most of the tested reduced velocities. A comparison of the modal damping ratios also suggests that the torsional damping ratio is much more sensitive to the frequency ratio, especially for the two models with nonzero gap (16% and 35% gap-width). The test results clearly show that the effects of the frequency ratio on the flutter derivatives and the aerodynamic forces were dependent on the aerodynamic cross-section shape of the bridge deck.

• Wind and Structures
• /
• 제7권1호
• /
• pp.41-54
• /
• 2004

An analysis refinement of the Messina Strait suspension bridge project has been recently required, concerning mainly the yaw angle effects on the multi-box deck section aerodynamics and the vortex shedding at low reduced velocities $V^*$. In particular the possible interaction of the axial flow with the large cross beams has been investigated. An original test rig has been designed at this purpose allowing for both forced motion and free motion aero elastic tests, varying the average angle of attack ${\alpha}$ and the deck yaw angle ${\beta}$. The hydraulic driven test rig allowed for both dynamic and stationary tests so that both the stationary coefficients and the flutter derivatives have been evaluated for each yaw angle. Specific free motion tests, taking advantage from the aeroelastic features of the section model, allowed also the study of the vortex shedding induced phenomena.

• 대한토목학회논문집
• /
• 제30권6B호
• /
• pp.589-598
• /
• 2010

하천단면의 형상이 복잡하고 교량이나 보등과 같은 수리구조물이 짧은 구간에 연속해서 설치되어 있는 경우, 흐름특성이나 하상변동 양상에 대한 분석이 매우 중요하다. 울산광역시를 관통하는 태화강의 삼호교 부근 약 250 m 구간에는 3개의 교량이 설치되어 있고, 상 하류에 각 1개씩의 지천이 유입되고 있어 홍수시 수위변화와 세굴 등에 의한 단면 변화가 크게 나타난다. 그럼에도 불구하고 태화강이 삼호교(구)를 기준으로 국가하천과 지방하천으로 나뉘는 구간이라는 이유로 상 하류 구간을 1차원 모형을 통해 따로 구분하여 분석하고 있다. 본 연구에서는 1차원 HEC-RAS 모형과 2차원 SMS 모형의 RMA2 모형을 이용하여 교량밀집과 지천유입에 따른 흐름특성을 상 하류 연계하여 비교 분석하였으며, SMS 모형의 SED2D 모형을 이용하여 같은 구간에 대한 하상변동 양상을 분석하였다. 그 결과 연속된 3개 교량에 대한 HEC-RAS 모형 과 RMA2 모형의 수위차는 0.87 m였고, SED2D 모형에 의한 하상변동 모의결과는 교각간격이 좁고 중간에 위치한 삼호교(문화재)에서 최대 0.231 m가 세굴되는 것으로 나타났다. 그러므로 하천기본계획시 교량밀집 지역이나 단면 및 흐름 변화가 심한 구간에 대해서는 2차원 모형에 의한 홍수위 산정과 교각의 세굴에 대한 대책이 필요하고, 국가하천 및 지방하천에 대한 통합적인 분석이 필요하다. 어지는 경우도 있었다. GQPM에 대한 10일강우예측은 첨두강수와 강수총량에 있어서 다소 과소한 모의값을 보이고 있으며, 강수보정효과도 RDAPS에 비하여 저조한 수준이었다. 이 부분은 강수예측의 사후보정으로는 한계가 있는 것으로 보여지며 원시예측모형의 안정화를 통하여 개선할 수 있는 부분으로 판단된다.