• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.1
• /
• pp.43-49
• /
• 2005

The high rate of voltage rise (dv/dt) in motor terminals caused by high-frequency switching and impedance mismatches between inverter and motor are known as the primary causes of irregular voltage distributions and insulation breakdowns on stator windings in IGBT PWM inverter-driven induction motors. In this paper, voltage distributions in the stator windings of an induction motor driven by an IGBT PWM inverter are studied. To analyze the irregular voltages of stator windings, high frequency parameters are derived from the finite element (FE) analysis of stator slots. An equivalent circuit composed of distributed capacitances, inductance, and resistance is derived from these parameters. This equivalent circuit is then used for simulation in order to predict the voltage distributions among the turns and coils. The effects of various rising times in motor terminal voltages and cable lengths on the stator voltage distribution are also presented. For a comparison with simulations, an induction motor with taps in the stator turns was made and driven by a variable-rising time switching surge generator. The test results are shown.

• IE interfaces
• /
• v.21 no.3
• /
• pp.274-282
• /
• 2008

This paper considers a transporter scheduling problem under dynamic block transportation environment in shipbuilding. In dynamic situations, there exist the addition or cancellation of block transportation requirements, sudden breakdowns and maintenance of transporters. The transportation of the blocks in the shipyard has some distinct characteristics. Some blocks are available to be picked up at a specific time during the planning horizon while some other blocks need to be delivered before a specific time. These requirements cause two penalty times : 1) delay times incurred when a block is picked up after a required start time, and 2) tardy times incurred when a block shipment is completed after the required delivery time. The blocks are located at different areas in the shipyard and transported by transporters. The objective of this paper is to propose heuristic algorithms which minimize the weighted sum of empty transporter travel times, delay times, and tardy times. Four heuristic algorithms for transporter scheduling are proposed and their performance is evaluated.

• Journal of Korea Multimedia Society
• /
• v.17 no.11
• /
• pp.1335-1344
• /
• 2014

In architectural design, the user is one of the most important factors for the design task as well as the standard for evaluating the value of the built environment after its construction. Recently, accidents, such as fires and breakdowns, in huge and complicated buildings have increased the importance of user behavior simulation. The Korean government has tried to establish a regulation for the prevention of accidents in the built environment. This is regarded as a significant step forward for providing a safer and more appropriate environment for users. However, the existing technologies related to analyzing user behavior only simulate simplified situations. Such simulations are not enough to evaluate accurately the designed alternatives because buildings and spaces contain more complicated information than what we have conventionally considered. Thus, we propose that the advanced agent can interact with the architectural context. It can understand not only the physical situation but also how the users affect this situation. In order to realize this, we adopted the concept of affordances as the perceived action possibilities for the simulation environment.

• Journal of Navigation and Port Research
• /
• v.33 no.6
• /
• pp.429-436
• /
• 2009

Container cranes are main equipments to load and unload containers to container ships at container terminals. If a crane breakdowns, it can reduce the productivity of container terminals. This paper deals with Preventive Maintenance (PM) schedules for the container cranes. The cranes consist of many parts and we analyze the structure of a container crane using the tree models. Next, we apply a Genetic Algorithm (GA) for determining optimal PM schedule and evaluate the performance of the proposed method through simulation system Finally, we explain how to adjust the PM schedule found in industry based on work schedules.

• Journal of the military operations research society of Korea
• /
• v.3 no.1
• /
• pp.109-114
• /
• 1977

There are some factors which cause the profits from the production to be decreased or increased. They are, for example, the rise in efficiency of production facilities resulting from the development of the scientific technique, the changes of purchase price of those, and the drop in efficiency of those owing to there long-term operation. In this connection, an manager can get the highest profit by deciding the proper time of new facilities replacement for those in operation or in being planned, which leads to good management planning of his manufactaring business for a given period or a long time. Main purpose of this is the study of how we decide the optimal time or facilities replacement in order to maximize the total profits for a given period by considering them as continous function as to the time in the case where a machineng is set. The results are following: 1. The definition of profit function is in duced in consideration of the breakdowns caused from continous operation of the machinery. 2. The necessary conditions are obtained for the optimal time of replacement and find out the methods of its solution. 3. Comparing between the 'Short cut' method and method in this paper, we obtained that our method is more realistic.

• Journal of Animal Environmental Science
• /
• v.3 no.2
• /
• pp.133-143
• /
• 1997

Optimal conditions for collecting, storing and drying temperature to utilize slaughter porcine blood for blood meals and the effects of blood meal on growth in broiler chicks were investigated. Dry matter and protein contents of slaughter procine blood were 19.5% and 77%(dry basis), respectively. As for the composites of amino acids in the blood, aspartic acid, arginine, glycine, histidine, leucine, lysine, phenylalanin threonine were shown high. There was no significant difference between the collections by bloodletting and vacuumming in terms of microbial contamination. Storage of slaughter porcine blood showed no differences in protein, DNA and triglyceride contents and pH between the storage methods of freezing (-20$^{\circ}C$) and refrigerating (-4$^{\circ}C$). In case of room temperature storage, however, the decrease in pH and the appearance of new protein due to microbial contaminations increased as the storage periods were prolonged. When drying was done by flash methods, the drying period got shortened as the temperature became higher, yet protein and triglyceride were destoryed more. When drying was done over 120$^{\circ}C$, even at the same degree, the breakdowns of protein and triglyceride increased more as drying period got longer. In feeding trials of broiler chicks, dietary supplementation of the flash dried blood meal at 2% level showed significant difference in growth rate(P＜.05%). These results indicated that the appropriate handling and manufacturing of slaughter porcine blood enabled the blood to be used as a protein source for broiler chicks.

• Journal of Family Resource Management and Policy Review
• /
• v.13 no.2
• /
• pp.107-127
• /
• 2009

The purpose of this study was to explore how married female immigrants adjust to their lives in Korea. A total of 15 women from three different countries participated in the study. The major issues that these women faced included communication breakdowns with their husband and other family members, financial problems as well as problems with raising children in a different culture. The findings showed that such problems were usually rooted in a lack of Korean cultural knowledge and skills. Additionally, the inaccurate use of the language by married female immigrants who have lived in Korea for longer than six months was often fossilized. For instance, because they usually learned the language in a local dialect, it took them longer to distinguish the dialect from standard Korean. The results found that married female immigrants who received both Korean lessons and family life education instructions overcame their culture shock and adapted to Korean culture more easily than those who did not receive such instructions.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.2
• /
• pp.148-154
• /
• 2003

Short ($\tau$=40 $mutextrm{s}$) and high-voltage ($U_{sub}$=2~8 kV) negative substrate bias pulses were used to assist pulsed magnetron sputtering DLC films deposition. Space- and time-resolved probe measurements of the plasma characteristics have been performed. It was shown that in case of high-voltage substrate bias spatial non-uniformity of the magnetron discharge plasma density greatly affected DLC deposition process. By Raman spectroscopy it was found that maximum percentage of s $p^3$-bonded carbon atoms (40 ~ 50%) in the coating was attained at energy $E_{c}$ ~700 eV per deposited carbon atom. Despite rather low diamond-like phase content these coatings are characterized by good adhesion due to ion mixing promoted by high acceleration voltage. Short duration of the bias pulses is also important to prevent electric breakdowns of insulating DLC film during its growth.wth.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.1
• /
• pp.29-34
• /
• 2015

DC bus electrolytic capacitors are used in variety of equipments as smoothing element of the power converters because it has high capacitance for its size and low price. It is responsible for frequent breakdowns of many static converters and inverter drive systems. Therefore it is important to diagnosis monitoring the condition of an electrolytic capacitor in real-time to predict the failure of power converter. In this paper, the on-line remote diagnosis monitoring system for DC BUS electrolytic capacitors of power converter using low-cost type Zigbee communication modules is developed. To estimate the health status of the capacitor, the equivalent series resistor(ESR) of the component has to be determined. The capacitor ESR is estimated by using RMS computation using AC coupling method of DC link ripple voltage/current. The Zigbee communication-based experimental results show that the proposed remote DC capacitor diagnosis monitoring system can be applied to DC/DC converter and UPS successfully.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.2
• /
• pp.235-245
• /
• 1998

This paper presents the fuzzy optimization model based scheduling methodology for the efficient production control of a FFS(FIexible Flow Shop) under the uncertain production environment. To develop the methodology, a fuzzy optimization technique is introduced in which the uncertain production capacity caused by the random events like the machine breakdowns or the absence of workers is modeled by fuzzy number. Since the problem is NP hard, the goal of this study is to obtain the near optimal but practical schedule in an efficient way. Thus, Lagrangian relaxation method is used to decompose the problem into a set of subproblems which are easier to solve than the original one. Also, to construct the feasible schedule, a heuristic algorithm was proposed. To evaluate the performance of the proposed method, computational experiments, based on the real factory data, are performed. Then, the results are compared with those of the other methods, the deterministic one and the existing one used in the factory, in the various performance indices. The comparison results demonstrate that the proposed method is more effective than the other methods.