• Korea-Australia Rheology Journal
• /
• v.14 no.4
• /
• pp.189-201
• /
• 2002

The interaction between hydrophobically modified hydroxyethyl cellulose (hmHEC), containing approximately 1 wt% side-alkyl chains of $C_{16}$, and an anionic sodium dodecyl sulphate (SDS) surfactant was investigated. For a semi-dilute solution of 0.5 wt% hmHEC, the previously observed behaviour of a maximum in solution viscosity at intermediate SDS concentrations, followed by a drop at higher SDS concentrations, until above the cmc of surfactant when the solution resembles that of the unsubstituted polymer, was confirmed. Additionally, a two-phase region containing a hydrogel phase and a water-like supernatant was found at low SDS concentrations up to 0.2 wt%, a concentration which is akin to the critical association concentration, cac, of SDS in the presence of hmHEC. Above this concentration, SDS molecules bind strongly to form mixed micellar aggregates with the polymer alkyl side-chains, thus strengthening the network junctions, resulting in the observed increase in viscosity and elastic modulus of the solution. The shear behaviour of this polymer-surfactant complex during steady and step stress experiments was examined In great detail. Between SDS concentrations of 0.2 and 0.25 wt%, the shear viscosity of the hmHEC-polymer complex network undergoes shear-induced thickening, followed by a two-stage shear-induced fracture or break-up of the network. The thickening is thought to be due to structural rearrangement, causing the network of flexible polymers to expand, enabling some polymer hydrophobic groups to be converted from intra- to inter-chain associations. At higher applied stress, a partial local break-up of the network occurs, while at even higher stress, above the critical or network yield stress, a complete fracture of the network into small microgel-like units, Is believed to occur. This second network rupture is progressive with time of shear and no steady state in viscosity was observed even after 300 s. The structure which was reformed after the cessation of shear is found to be significantly different from the original state.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.15 no.3
• /
• pp.115-126
• /
• 2005

SHACAL-2 is a 256-bit block cipher with up to 512 bits of key length based on the hash function SHA-2. It was submitted to the the NESSIE project and was recommended as one of the NESSIE selections. In this paper, we present two types of related-key attacks called the related-key differential-(non)linear and the related-key rectangle attacks, and we discuss the security of SHACAL-2 against these two types of attacks. Using the related-key differential-nonlinear attack, we can break SHACAL-2 with 512-bit keys up to 35 out of its 64 rounds, and using the related-key rectangle attack, we can break SHACAL-2 with 512-bit keys up to 37 rounds.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.505-510
• /
• 2012

The gas hold-up has a strong relationship with the size distribution and rising velocities of bubbles in a bubble column. Therefore, many previous researchers have studied on the hydrodynamics focusing on the bubble size variation in bubble column. In this study, the bubble behavior was influenced by partitioning porous plates installed at a certain height in a trayed bubble column. The gas hold-up was increased in non-sparging region (H/D > 5) as well as sparging region. We identified the effect of the partitioning porous plate using three trayed bubble columns with different reactor geometries. Furthermore, the bubble break-up frequency and size distribution were observed before and after individual bubbles penetrated through the plate. The arrangement of the plates was also investigated using a 0.15-m-in-diameter bubble column. Based on the result, we applied this design concept to a 0.36-m-in-diameter, 22 m tall trayed bubble column and identified the effect of the partitioning porous plate on the gas hold-up increase.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2839-2843
• /
• 2013

In this study, the relation between the corneal refractive power and the tear break-up time(TBUT) was analyzed. The results can be effectively used in eye clinics and served as the reference on wearing the contact lenses. We had measured the radius of the corneal of university students who are in the range of 21 to 27 year-old and who don't have eye disease. The corneal refractive power was calculated by using the radius of the corneal. And TBUT is the time when the mire image is distorted first time. The relation between the corneal refractive power and TBUT in right eye was a linear as 'y=37.921-0.610x', in which the larger the refractive power of the cornea is, the shorter TBUT is(negative relationship; r=-0.462, p=0.010). The relation in left eye was also a negatively linear as 'y=41.894-0.695x'(r=-0.509, p=0.004). Consequently, in both eyes the corneal refractive power and TBUT have a negative correlation when myopia is a high. It is possible to predict TBUT, which is necessary in deciding on wear of contact lenses, by measuring the corneal radius of subjects.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.9-15
• /
• 2006

Experiments are conducted to compare fuel economy of FTP-75 mode on two different lock-up conditions; (A) Lock-up on at engine speed of 1,200(rpm) and above for 3rd & 4th gear, (B) Lock-up on at engine speed of 1400rpm and above for 4th gear only. As a result, case A had better fuel economy about 2.75(%) than case B for FTP-75 mode. Simulation(CRUISE, AVL) study is also carried out in order to estimate the effect of Lock-up control strategy for vehicle fuel economy. The fuel economy simulation result agrees with the measured fuel economy within error of 2(%). The improved Lock-up control strategy is proposed by simulation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.236-242
• /
• 1996

Orostachys japonjcus, called Wasong in herb medicine, has been artificially cultivated as an anti-tumor medicinal. The experiment was done to examine the effect of night-break periods imposed immediately before its bolting time on its morphological, flowering-related characters and fraction dry weights. After a plant was grown in a 15cm plastic pot containing a 2:1 soil:Peat moss mixture for about 3 months, three different night-break periods (0.5, 1 and 2 hours) around midnight were treated from Aug. 24. to compare with the natural daylength. The plants were sampled 6 times by 2-week interval after the treatments. Plant height and inflorescence length of all the treatments inclined with time lapse after the treatment and were shorter in 2 hour night-break due to slow increment than in the other treatments, while stem diameter showed reverse result. All the treatments except 2 hour night -break were nearly same in fraction, shoot and total dry weights per plant; two hour night-break treatment had greater leaf and bract weight from 6 weeks, greater stem, shoot and total weights from 2 weeks and greater root weight from 4 weeks but did less floret weight after the treatment. Although florets on the inflorescence were formed in 2 hour night-break treatment, flowering florets and flowering plants never occurred. In the other treatments showed the similar response, however, more florets appeared from 2 weeks, flowering florets was sharply increased from 6 weeks and flowering plants were reached up to 100% from 6 to 8 weeks after the treatment. Inflorescence length or number of total florets per plant in 2 hour night-break was positive-correlated to all the fraction dry weights except that those of natural daylength was not done, meaning that its artificial cultivation should permit bolting to secure more shoot dry matter.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.4
• /
• pp.210-218
• /
• 2013

The sea breeze shows different characteristics compared to land breeze, such as high wind speed and more rapider shift period. One of the major factors affecting plant early growth is wind speed. In the early growth stage, tree growth-rates rise with decreasing wind speed. Thus, the study was performed to identify wind break effects on wind characteristics and tree growth. The wind break used in this study was about 130 meters length and 3 meters height, made up with poly-ethylene (with 40% openness). We installed one vane and fifteen anemographs at three different heights (1, 2 and 3 meters) on the inner and outer wind break areas. The wind characteristic and plant growth data were collected from Jun. 2011 to Oct. over 2012. The wind rose of the Saemangum seawall area presented the north (21.5%) and it was followed by north-west (18.1%), east (14.9%) and north-east (13.7%) and the remainder with other directions. Wind speeds at height were different. The tree height was 159.6 cm at inside and 129.6 cm at outside. The diameter at root-collar was 36.9 mm at inside and 32.6 mm at outside from wind break.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.68-72
• /
• 1993

A method to measure the distortions of the loudspeaker at low frequencies without an anechoic chamber is proposed. This method utilizes the fact that the n-th harmonic distortion outside the enclosure is boosted by 40log n dB compared to that inside the enclosure. By compensating for the effect of standing waves occuring inside the enclosure, it is possible to predict the distortions for wide frequency ranges below the first break-up frequency of the diaphragm. The method is applicable to the intermodulation distortion as well.

• Journal of the Korean Society of Industry Convergence
• /
• v.3 no.1
• /
• pp.37-42
• /
• 2000

액체 분무가 벽면의 평평한 면에 충돌할 때의 거동에 대해 실험을 통하여 조사하였다. 각 분사노즐과 벽면까지의 거리 그리고 분사 속도에 있어서 충돌점에서의 액체 액막의 비산 거동과 평면에서의 액막의 흐름에 대하여 관찰하였다. 충돌점에서 비산하는 액적의 비산율을 정량적으로 측정하였다. 분사속도가 증가에 의해 충돌 거동은 5개의 영역으로 분류되며, 분사속도가 증가하면 비산율도 증가하게 된다. 또한, 충돌거리가 분무의 분열점보다 길때의 분사량의 약 반 정도가 비산하게 되는 결과가 얻어졌다.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.17-18
• /
• 2003

Drop deformation in a cylindrical contraction geometry, characterized here by the formation of a thread of drop fluid in the contraction, is predicted using a Volume-of-Fluid numerical technique. The predicted drop shape is found to closely follow the observed deformation. A capillary instability in the developing drop thread in the contraction was predicted, in agreement with experimental observation.