• 상하수도학회지
• /
• 제16권6호
• /
• pp.710-716
• /
• 2002

A General Pipe Break Prediction Model that incorporates linear and exponential models in its form is developed. The model is capable of fitting pipe break trends that have linear, exponential or in between of linear and exponential trend by using a weighting factor. The weighting factor is adjusted to obtain a best model that minimizes the sum of squared errors of the model. The model essentially plots a best curve (or a line) passing through "cumulative number of pipe breaks" versus "break times since installation of a pipe" data points. Therefore, it prevents over-predicting future number of pipe breaks compared to the conventional exponential model. The optimal replacement time equation is derived by using the Threshold Break Rate equation by Loganathan et al. (2002).

• Journal of Biosystems Engineering
• /
• 제34권4호
• /
• pp.228-233
• /
• 2009

In order to cut the round bale easily, a roughage cut-feeder for the round bale was developed in this study. This study consists of two parts. One is development of a cutting mechanism and a performance test reported in the previous paper. This is the second part of the study. For the study, recent trend of traditional cutting system was analyzed. Also, cost of the prototype cut-feeder was analyzed and determine the break-even point of farm size was determined by comparing with traditional method using a traditional cutter. A prototype cut-feeder was investigated with the fact that working performance, fiber length and shape of roughage and feeding quality was good. Operating cost of the prototype cut-feeder decreased rapidly with an increase of farm size. Break-even point in terms of farm size was 36 heads for beef and 28 heads for dairy. Also, costs estimated were 118,000 won/head year and 148,000 won/head year, respectively.

• Nuclear Engineering and Technology
• /
• 제29권3호
• /
• pp.229-239
• /
• 1997

To investigate the realistic behavior of mass and energy release and resultant containment response during large break Loss of Coolant accident (LOCA), analyses are performed for Yonggwang (YGN) 3&4 nuclear power plants by using a merged version of RELAP5/CONTEMPT4 computer code. Comparative analyses by using conservative design computer codes are also peformed. The break types analyzed are the double-ended guillotine breaks at the cold leg and hot leg. The design analysis resulted in containment peak pressure during post-blowdown phase for the cold leg break. However, the RELAP5/CONTEMPT4 analyses show that the containment pressure has a peak during blowdown phase, thereafter it decreases monotonously without the second port-blowdown peak. For the hot leg break, revised design analysis shows much lower pressure than that reported in YGN 3&4 final safety analysis report. The RELAP5/CONTEMPT4 analysis shoos similar trend and confirmed that the bypass flow through the broken loop steam generator during post-blowdown is negligibly small compared to that of cold leg break. The low pressure and temperature predicted tv realistic analysis presented in this paper suggest that the design analysis methodology contains substantial margin and it can be improved to provide benefit in investment protection, such as, relaxing plant technical specifications and reducing containment design pressure.

• Elastomers and Composites
• /
• 제50권3호
• /
• pp.196-204
• /
• 2015

Crosslink density of a rubber vulcanizate determines the chemical and physical properties, while bound rubber is an important factor to estimate reinforcement of a filled rubber compound. Extender oil is added to a raw rubber with very high molecular weight for improving processability of a rubber composite. Influence of extender oil on crosslink density, bound rubber formation, and physical properties of solution styrene-butadiene rubber (SSBR) composites with differing microstructures was investigated. Crosslink densities of non-oil-extended SSBR (NO-SSBR) vulcanizates were higher than those of oil-extended SSBR (OE-SSBR) ones. Bound rubber contents of NO-SSBR compounds were also greater than those of OE-SSBR ones. The experimental results could be explained by interfering of extender oil. The OE-SSBR vulcanizates had low modulus but long elongation at break, whereas the NO-SSBR ones had high modulus but short elongation at break. It was found that the crosslink densities affected the physical properties more than the bound rubber contents. The moduli increased with increase in the crosslink density irrespective of extender oil, while the elongation at break decreased. Each variation of the tensile strengths of NO-SSBR and OE-SSBR vulcanizates with the crosslink density showed a decreasing trend. Tear strength of the OE-SSBR vulcanizate increased with increase in the crosslink density, whereas variation of the tear strength of NO-SSBR vulcanizate with the crosslink density showed a weak decreasing trend.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권3호
• /
• pp.129-134
• /
• 2023

Although the use of batteries is rapidly increasing worldwide to improve carbon neutrality and energy efficiency, performance degradation due to the increase in the number of uses is inevitable as it is a finite resource that can be applied according to capacity and specifications. Deterioration and failure of batteries are recognized as important problems in various applications using batteries, including electric vehicles. In order to solve these problems, a diagnostic technology capable of accurately predicting battery life and grasping state information is required, but it is difficult in a non-linear form due to internal structure or chemical change. In this paper, the factors that generally cause battery performance change are directly applied to check whether there are external changes and impedance changes in the battery, and to analyze whether they affect battery life. Impedance change trends and result values were confirmed using a universal impedance spectroscopy method and a self-developed internal impedance measurement method. The results did not significantly affect the impedance change trend. It was confirmed that the increase in the number of times of battery use was prominent in the impedance change trend.

• Steel and Composite Structures
• /
• 제18권6호
• /
• pp.1465-1478
• /
• 2015

The effect of cutting off fibers on transient load in a polymeric matrix composite lamina was studied in this paper. The behavior of fibers was considered to be linear elastic and the matrix behavior was considered to be linear viscoelastic. To model the viscoelastic behavior of matrix, a three parameter solid model was employed. To conduct this research, finite difference method was used. The governing equations were obtained using Shear-lag theory and were solved using boundary and initial conditions before and after the development of break. Using finite difference method, the governing integro-differential equations were developed and normal stress in the fibers is obtained. Particular attention is paid the dynamic overshoot resulting when the fibers are suddenly broken. Results show that considering viscoelastic properties of matrix causes a decrease in dynamic load concentration factor and an increase in static load concentration factor. Also with increases the number of broken fibers, trend of increasing load concentration factor decreases gradually. Furthermore, the overshoot of load in fibers adjacent to the break in a polymeric matrix with high transient time is lower than a matrix with lower transient time, but the load concentration factor in the matrix with high transient time is lower.

• 한국항공우주학회지
• /
• 제43권3호
• /
• pp.224-231
• /
• 2015

람다 날개 형상의 공력 계수에 대한 실험적 연구를 국방과학연구소의 중형아음속 풍동에서 수행하였다. 본 연구의 주목적은 옆미끄럼각의 변화에 따라 다양한 공력 계수가 어떻게 변화하는지를 조사하는 것이다. 옆미끄럼각이 $0^{\circ}C$인 경우, 피칭 모멘트가 급격히 불안정해지는 현상을 확인하였으며, 옆미끄럼각이 증가함에 따라 pitch break 현상이 더 높은 받음각에서 발생하는 것을 확인하였다. 롤링 모멘트는 옆미끄럼각이 있는 경우 pitch break와 유사한 특성을 보여준다. 이런 경향은 옆미끄럼각이 증가할수록 더 심하게 나타났다. 요잉 모멘트는 높은 받음각에서 옆미끄럼각에 따라 기울기가 크게 변화하였고 불안정한 방향 안정성이 뚜렷이 나타났다. 모멘트의 이런 특성들은 비행 제어를 위해서는 보다 효과적인 조종성 증가 장치가 필수적이란 것을 의미하고 있다.

• 한국수자원학회논문집
• /
• 제42권7호
• /
• pp.525-535
• /
• 2009

본 연구에서는 상수관망에서 개별적으로 노후도가 심하여 개량이 필요한 구간을 보다 정확하게 구분하기 위해 새로운 개별관로 정의 방법이 개발되었다. 적절한 관로 최소구성성분 길이를 결정하기 위하여 여러 가지 관로 최소구성성분 길이에 대한 평균 누적파손횟수경사선의 분산값을 비교하여 가장 큰 분산값을 나타내는 관로 최소구성성분 길이인 4 m 를 연구대상 지역의 상수관망에 적용하였으며 관로 ID는 39개로 구분되어졌다. 관로의 경제적 최적교체 시기는 한계파손율과 관로의 파손경향모형을 이용하여 결정되었는데, 각 관로 ID에 대하여 관로의 선형적 파손경향, 지수적 파손경향 또는 선형과 지수형 사이에 있는 파손경향 모두에 적용될 수 있는 General Pipe Break Prediction Model(Park and Loganathan, 2002)과 수정된 시간척도를 이용한 ROCOF(Park et al., 2007)를 적용하여 연구대상 상수관망의 최적교체시기를 산정 및 분석하였다. ROCOF 모형화 과정에서 대수-선형과 와이블 ROCOF를 적용 후 최대로그우도 추정값을 비교하여 최대로그우도가 큰 값을 가지는 ROCOF를 각 관로 ID의 ROCOF로 사용하였다. 관로파손으로 인한 사회적 비용이 관로의 최적교체시기에 미치는 영향도 분석되었다.

• Bulletin of the Korean Chemical Society
• /
• 제35권4호
• /
• pp.1016-1022
• /
• 2014

The kinetic studies on the reactions of O-methyl N,N-diisopropylamino phosphonochloridothioate with X-anilines and X-pyridines have been carried out in acetonitrile. The free energy relationship with X in the anilines exhibits biphasic concave upwards with a break region between X = (H and 4-F), giving unusual negative ${\beta}_X$ and positive ${\rho}_X$ values with weakly basic anilines. The unusual phenomenon is rationalized by isokinetic relationship. A stepwise mechanism with a rate-limiting leaving group departure from the intermediate is proposed based on the selectivity parameter and variation trend of the deuterium kinetic isotope effects with X. The free energy relationship with X in the pyridines exhibits biphasic concave upwards with a break point at X = 3-MeO. A concerted mechanism is proposed based on relatively small ${\beta}_X$ value, and frontside and backside nucleophilic attack are proposed with strongly and weakly basic pyridines, respectively.

• 한국게임학회 논문지
• /
• 제1권1호
• /
• pp.94-101
• /
• 2001

최근 모바일 산업의 급증으로 소비자들의 여가시간 활용이 PC게임에 국한되었으나 요즘에는 무선이동통신의 발달로 휴대폰으로도 다양하고 개성화된 게임을 즐기게 되었다. 이에 본 논문에서는 모바일 게임에 대한 정보 제공과 전략적인 기술을 바탕으로 게임의 효과의 관계에 대해 실증적으로 적용하는 방법을 제시하고자 한다.