• 한국해양학회지
• /
• v.23 no.1
• /
• pp.24-40
• /
• 1988

In the Korea Ocean Nodule Development (KONOD)-1 area between the Clarion and Clipperton fracture zones of the northeastern equatorial Pacific, the pelagic sediment layer can be divided into two or three units on air-gun seismic profile. The acoustic units can be also correlated with those in the DSDP site 163 core. The topmost unit (unit I) is acoustically transparent and consists of zeolitic clay and radiolarian ooze of late Oligocene to middle Eocene age. Unit IIA is well-stratified and transparent in the lower part. consisting of the radiolarian ooze intercalated with chert beds and zeolitic clay of early Eocene to Paleocene age. Unit IIB is stratified with layers of silicified and compacted flinty-cherty nannofossil chalk (late Cretaceous) on top of the acoustic basement. Units I and IIA form the Line Islands Formation that overlies an unnamed formation of unit lIB. The entire layers and the unit I layer propressively thin northward, except near the Line Islands Ridge. The distribution of sediment layer has been controlled by the equatorial Cenozoic CCD and the northward spreading of the Pacific plate. The change of CCD corresponding to the subsidence and migration of the plate has determined the sediment composition of the DSDP 163 core passed across the equator of high sedimentation suite. The late Cretaceous sedimentary layer (unit IIB) in the 163 core was formed above the CCD south of the equator. The unit IIA resulted from rapid subsidence of the Pacific plate below the CCD in the Paleocene. The unit IIA is seen only in the west of 149 W. Both the units IIA and I were probably formed during the Pacific plate passing and after leaving the equatorial region respectively since early Eocene. In the south of the KONOD-l area, the unit I was redistributed by bottom current, a branch of the Antarctic Bottom Water flowing eastward guided by the Clipperton fracture zone. The activities of bottom currents were prolonged for a long geological time. Turbidite layers occur more than 350 km from the Hawaiian Ridge to near the Clarion fracture zone. They originated directly from the Hawaiian Ridge, filling the topographic lows.

• Journal of Fashion Business
• /
• v.6 no.1
• /
• pp.137-154
• /
• 2002

It's not easy to renew old brand of over 50 years history to the tastes of new consumer of our time. Most of national brands that has a history of some 20 years in Korea have strove for continuation and growth of brand to no avails, which can be taken as a good example of current situation. For instance, C company, one of the National brand of US which has a history of 51 years, has made its position secure as a fashion group and based itself on a sound foundation by establishing new marketing strategy and completing successful brand renewal in the process of strategic M&A with Italian company. Those successful marketing strategies are as follows. 1) they regarded both market and consumer oriented marketing activity as company's highest priority strategy and put great emphasis upon concentration on target market and reestablishment of brand image of business casual wear. 2) Setting up and operating planning team composed of merchandizer alone in Milano, they set the direction of plan on the basis of concentrated research on potential item in market according to thorough market research done by buying office in Korea, branch office in Hong Kong and buyer in US prior to blueprint planning for season. 3) Great emphasis was placed on business which focused on intensive presentation of basic key item for apparel career women who are main consumer group in the midium-low prices market in US and on supplementation of size and color. they named this line 'collectibles' and helped their customer develop their own clothes plan without worrying about the change of color and fabric by supporting same fabric and color throughout the year and enabled them to add variation easily by supplementing new trend item. 4) Company set black as a main color that lots of apparel career women find easy to care and to express their own image and presented them with pebble which belongs to navy and beige and added fashion color such as wine and brown etc as season goes by. They constructed basic line in order for their customers to coordinate purchased item with new one or to add them to present collection, and to achieve efficient sale by setting up strategy which allows this cross coordination and changing pattern occasionally. 5) Though basic jacket for 99$, short slim skirt for 49$ are products within midium-low prices range, in the material planning stage aiming at production of item that has both resonable function appealing to consumer and is fashionable, synthetic material had to be used as a main source due to price competitiveness. Despite this situation, considering comfortable sense of fit and refined drape of silhouette that has no sign of cheap material, whole collectible line was divided into two items, which contributed to reduction of cost. In case of material that is composed of triacetate and polyester in 70 to 30 ratio, was used up to 4 million yard, which allowed drastic curtailment of cost accompanied by concentration. In case of 'collectibles' line, using Korean material mainly, C company chose to have their product sewed in Southeast Asian countries where transportation is well developed and both productivity and quality verified by operating global production system which aiming at cutdown of cost through outsourcing production from the country where labor cost is low and getting finished product. Polarization between present consumers telling us that consumers with the mind of middle classes in the past no longer exists between consumers who seek after only fine article of highest quality and wise consumers who are sensible enough to judge bubble on correlation between price and quality. To cope with this change in new consumer mind, apparel makes changing their policy so as to produce item that has reasonable quality and falls within affordable price range anywhere in the world. and they're striving to get out of difficult situation by operating global marketing strategy which stresses separation of planning, production and sale and sensibility of fashion shared worldwide. The marketing strategy of C company can be exemplified as a successful one.

• Journal of Korean Society of Forest Science
• /
• v.42 no.1
• /
• pp.74-82
• /
• 1979

Pinus densiflora S. et Z. which has the widest distribution and highest stock at present in Korea and has used as materials for fuel, house construction, furniture and many other purposes for several hundred years, is considered as one of major species of economic importance, although there are a few epidemic insect injuries and silvicultural difficulties in regeneration. However, since disorderly cutting has been conducted for long time, the valuable local stands have disappeared. Therefore immediate attempts should be taken on the gene conservation and genetic studies including heritabilities and genetic gains of desirable characters. One hundred and twently five plus trees have so far been selected from the nationwide area and kept for the purpose of seed orchard establishment and other theoretical studies. In this study, the wind pollinated seeds of grafted stocks of 13 plus trees in clone bank located in Suweon and the seeds of 4 Japanese plus trees were collected and their progenies were used for heritability study. As indicated in figure 1, thirteen plus trees are from the middle part of Korea and two experimental plantations were laid out in ]972 (1-1 stock) by the randomized block design with five replications, consisting of 10 trees line plots of each family in each replication. Tree height, root collar diameter and branch diameter at 1cm apart from the main stem were measured. The results are summarized as follows 1. The rank of height growth of each plus tree progenies by age was greatly changed under age 3 and it was affected more in poor site than good site. 2. The heritabilities of height growth were estimated to be 7.2% at age 3, negative sign at age 4, 9.4% at age 5, 13.0% at age 6, 8.1% at age 7 and abrupt increase of 63.8% at age 8. The heritabilities were generally increased with increase of age. 3. The heritabilities of root collar diameter and branch diameter (average of the three biggest branches) was 3.2% and 11.8% at age 8 respectively. 4. The genetic gain was largest at age 8 and it was 46.6% when a selection intensity, 1/500 was taken. It, therefore, seems to be reasonable that selection should not be made under age 7.

• Journal of Hospice and Palliative Care
• /
• v.16 no.2
• /
• pp.90-97
• /
• 2013

Purpose: Ten years have passed since the Korean government announced its plan to institutionally support hospice and palliative care in 2002. In line with that, this study aims to suggest future directions for Korea's hospice and palliative care policy. Methods: We conducted a survey on people's perception and acceptance of well-dying. Data were collected from 1,000 participants aged 19~69 years between June 1 and June 11, 2012 via computer-assisted telephone interviews. Results: The most important factor for well-dying was placing no burden of care on others (36.7%) and the second most important factor was staying with their family and loved ones (19.1%). Among nine suggestions of policy support for well-dying, the most popular was the promotion of voluntary care sharing (88.3%), followed by the palliative care training support for healthcare providers (83.7%) and the support for palliative care facilities instead of funeral halls (81.7%). The idea of formulating a five-year national plan for end-of-life care drew strong support (91%). According to the survey, the plan should be implemented by the central government (47.5%), the National Assembly (20.2%) or civic groups (10%). Conclusion: This study demonstrated the public consensus and their consistent direction toward policy support for well-dying. Results of this study may serve as a foundation for the establishment of policy support for people's well-dying and palliative care at the national-level.

• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.63-72
• /
• 2017

This study fabricated a low-voltage 10 circuit distribution board based on the KEMC (Korea Electrical Manufacturers Cooperative) 2102-610 standard and performed a characteristics assessment of the developed 10 circuit distribution board to secure product stability. The developed 10 circuit distribution board is designed to have the characteristics of insulation materials, as well as resistance to corrosion ultraviolet radiation and mechanical impact. The developed distribution board is fabricated to have an appropriate protection class of enclosure, electric shock prevention and protection circuits, switchgear and its components, internal electrical circuits and connectors, external conduct terminal, insulation characteristics, temperature rise test, heat resistance, etc. The developed 10 circuit distribution board consists of a single phase circuit and 3-phase circuits. It is possible to measure in real time the leakage current generated from the load distribution line by installing a sensor module at the load side of each of the branched switchgears. In addition, it is possible to increase a circuit according to the use and purpose of the load and to also manage and check the load in real time. Temperature rise tests were performed on the developed 10 circuit distribution board at 18 places including the inlet connection, main circuit and distribution circuit bus bars and bus bar supports, etc. The highest temperature of $65.3^{\circ}C$ was measured at the R-Phase of the connection of the MCCB power supply for the branch circuit bus bar and a temperature rise of $61.6^{\circ}C$ was measured at the T-Phase of the load side. When applying thermal stress to an MCCB for 6 hours at $180^{\circ}C$ using a heat resistant experimental device, it was found that the actuator lever was transformed and moved in the tripped state.

• Clinical and Experimental Pediatrics
• /
• v.51 no.6
• /
• pp.629-633
• /
• 2008

Purpose : This study was designed to investigate normal domestic values for the diameter of the left main coronary artery (LCA), the left anterior descending coronary artery (LAD) and the right coronary artery (RCA). These data are necessary to define dilatation of coronary arteries in Kawasaki disease cases. Methods : Study subjects were 43 normal healthy children whose ages ranged from 3 months to 6 years. They children visited Konkuk University hospital for echocardiograph examination between March 2005 and November 2007. Measurements of coronary arterial diameters at each branch were done by off-line analyses of recorded images. Simple regression analysis of each the measurements were performed using the body size (body surface area, etc.) as the independent variable. Results : Body surface area was significantly related to the diameters of LCA ($r^2=0.20$, P=0.0038), of LAD ($r^2=0.41$, P<0.0001), and of RCA ($r^2=0.30$, P=0.0002). In the regression model, the estimates of the y-intercept were 1.703, 1.058, and 1.007; the estimates of the regression coefficient were 0.971, 1.175, and 1.177; and the estimates of the standard deviation were 0.315, 0.221, and 0.282 with respect to the three coronary arteries. Conclusion : A the linear regression model of the diameters of three coronary arteries adjusted for body surface area was produced. With these results, the Z-score calculation of the diameter of three coronary arteries, based on normal domestic data, will be possible.

• Journal of Nutrition and Health
• /
• v.44 no.3
• /
• pp.196-202
• /
• 2011

Epigallocatechin gallate (EGCG), or epigallocatechin 3-gallate, is the ester of epigallocatechin and gallic acid, and is a type of catechin. EGCG may be therapeutic for many disorders including diabetics and some types of cancer. However it is unknown whether EGCG can induce transdifferentiation of pancreatic cells in pancreatitis. The aim of this study was to investigate the effects of EGCG on the expression of pancreatic regenerating related markers in pancreatic AR42J cells, a model of pancreatic progenitor cells. AR42J cells, differentiated with betacellulin and activin A, were cultured with/without EGCG in a time-dependent manner. Cell growth rate, levels of mRNA, and protein expression were examined with the MTT assay, quantitative PCR, and Western blots, respectively. The results showed that AR42J cell growth rates were inhibited by EGCG in a dose-dependent manner. mRNA and protein expression of amylase, insulin and neurogenin 3 (ngn 3) increased in AR42J cells treated with EGCG. Additionally, we demonstrated that the signal transduction pathway of mitogen-activated protein (MAP) kinase is active in EGCG-treated AR42J cells. ERK and JNK phosphorylation decreased in cells treated with EGCG but not p38 phosphorylation. Activation of the p38 MAP kinase pathway was confirmed by specific MAP kinase pathways inhibitors: U0126 for ERK, SP600126 for JNK, and SB203580 for p38. Activated p38 phosphorylation was inhibited by the specific p38 inhibitor SB203580 but p38 phosphorylation was inhibited with increased EGCG treatment. The ERK and JNK MAP kinase pathways were not affected by EGCG treatment. Although further studies are needed, these results suggest that EGCG affects the induction of pancreatic cell regeneration by increasing the ngn 3 protein and mRNA expression and activating the p38 MAP kinase pathway.

• Journal of Sericultural and Entomological Science
• /
• v.38 no.2
• /
• pp.93-99
• /
• 1996

By treatment(dropping) of 0.1~0.4% colchicine solution on the sprouts of winter buds of hard wood cutting slips for 4~5 days, two lines of artificial autotetraploids from Yongchonppong and one line from Yeongbyonppong were bred and the important cultivative characteristics of those new lines were as follows. The greentip sprouting stage of the new bred lines in spring season is later than the parental varieties by two days, but growth speed of the new lines after sprouting was faster than that of the parental varieties reaching the same level development with the parental varieties at the fifth leaf sprouting stage to be mid varieties same as the origins. The leaf shape of the new bred lines was wide round and the petioloes were long and thick. The thickness of leaf was thicker than the parental varieties by 17-33% and single leaf weight was heavy. The leaf area weight increased by 21-31% and the content of chlorophyll was also higher by 11-33%. With all the characteristics, the new breds produced good quality of leaves. The length and number of branches were shorter and less, respectively, than the parental varieties, but the internode length was either same or longer than the parents. Looking at the characteristics, the constitution of shoots was slightly inferior to the parental varieties. The cold hardness expressed by the death top rate of Sawonppong 23 and Sawonppong 24 was same level as that of Yongchonppong, but Sawonppong 25 was stronger than Yeongbyonppong in it with a high infection rate of dwarf disease. The productivity was lower than the parental varieties, but young shoot rate to shoot and branch and the ratio of leaf to young shoot were higher than the parental varieties. The fertility of Sawonppong 23 and Sawonppong 24 was comparatively high with 62% of cross success, but that of Sawonppong 25 was low with 23.9% of cross success.

• Journal of the Korean Society of Safety
• /
• v.33 no.1
• /
• pp.28-34
• /
• 2018

The purpose of this study is to fabricate a sensor module to detect the resistive leakage current (Igr) in real time that occurs to low voltage electric lines and to verify its reliability. In the case of the developed sensor module, wires are inserted into the zero current transformer (ZCT) and current transformer (CT) in advance and then the branch line is connected to the circuit breaker. The measurement result of the resistance of the distribution panel equipped with the developed sensor module shows that the resistance is $0.151m{\Omega}$ between the R and R phases, $0.169m{\Omega}$ between the S and S phases, and $0.178m{\Omega}$ between the T and T phases, respectively. The insulation resistance measured at AC 500 V and 1,000 V is $0.08m{\Omega}$ between the R, S, T and N phases, respectively. Then, the insulation resistance measured at DC 500 V is $83.3G{\Omega}$ between the R, S, T and G terminal, respectively. In addition, the applied withstanding voltage is AC 220 V/380 V/440 V and it was found that characteristics between all phases are good. This study measured the standby power by installing the developed sensor module at the rear of the MCCB and switching the circuit breaker on sequentially. The standby power is 1.350 W when one circuit breaker is turned on, 1.690 W when 2 circuit breakers are turned on, and 4.371 W when 10 circuit breakers are turned on. This study also verified the reliability of the standby power of the distribution panel equipped with the developed sensor module using the Minitab Program (Minitab PGM). Since the analysis shows the statistical average of 1.34627 in the reliable range of normal distribution, standard deviation of 0.001874, AD of 0.554, and P value of 0.140, it is found that the distribution panel equipped with the developed sensor module has high reliability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5513-5521
• /
• 2015

There is an operational efficiency problem about wayside equipment applied to the domestic low-density branch as the equipment has been installed and operated similarly in the mainline. On-board oriented train control system, which has been developed for train safety and operation efficiency, ensures safe train operation without expensive ground control signal devices. Such system consists of on-board control system, wayside control system, and local control system. In this paper, the details of tests such as suitability test, communication test, and interface test are described by installing the on-board control system and wayside control system in field. Installation tests include checking power, voltage, cable connection, LED status, etc. Field applicability of the developed system is also verified through the dynamic operation tests with diverse scenarios, which are performed on the virtual line similar to the real environment including switch machine and level crossing gate. Dynamic operation tests were conducted for total 7 scenarios, and several tests were repeated for each scenario. The elapsed time for each operation was computed by analyzing main process log, and we could check that each operation was accomplished within several seconds. Furthermore, the developed system was verified through field test with an accredited institute, and testing certificates were issued.