• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.432-436
• /
• 1991

This paper presents a new algorithm for the countermeasure to alleviate without shedding system loads the line overloads due to contingency in power system. This method for relieving by line switching is based on obtaining the line outage distribution factors - the linear sensitivity factors, which give the amount of change in the power flow of each line due to the removal of same other line in the power system. These factors are made up of the elements of Bus Reactance Matrix and branch reactances. In this paper a fast algorithm and program is presented for obtaining only the required Bus Reactance elements which corresponds to a non - zero elements of Bus Admittance Matrix and elements of columns which correspond to two terminal Buses of the overloaded(monitored) line. The proposed algorithm has been validated in tests on the 6 busbar test system

• Journal of Korean Neurosurgical Society
• /
• v.51 no.2
• /
• pp.91-93
• /
• 2012

Acute spontaneous subdural hematoma (SDH) of arterial origin is very rare. We report a case of acute spontaneous SDH that showed contrast media extravasation from cortical artery on angiograms. A 58-year-old male patient developed sudden onset headache and right hemiparesis. Brain CT scan demonstrated acute SDH at left convexity. The patient was drowsy mentality on admission. He had no history of head trauma. Cerebral angiography was performed and revealed a localized extravasation of the contrast media from distal cortical MCA branch. After angiography, the patient deteriorated to comatose mentality. Decompressive craniectomy for removal of SDH was performed. We verified the arterial origin of the bleeding and coagulated the bleeding focus. The histological diagnosis was aneurysmal artery. He recovered after surgery with mild disability. In a case of acute spontaneous SDH, the possibility of a cortical artery origin should be considered.

• Parasites, Hosts and Diseases
• /
• v.51 no.3
• /
• pp.383-385
• /
• 2013

Uzbekistan is endemic of cystic echinococcosis (CE). In order to estimate endemicity of CE, we collected data from emergency surgery due to CE in 2002-2010 and also investigated the prevalence of hydatid cysts in the liver and lungs of sheep at an abattoir in Uzbekistan from July 2009 to June 2010. In 14 emergency hospitals, 8,014 patients received surgical removal or drainage of CE during 2002-2010, and 2,966 patients were found in 2010. A total of 22,959 sheep were grossly examined of their liver and lungs, and 479 (2.1%) and 340 (1.5%) of them were positive for the cyst in the liver and lungs, respectively. Echinococcus granulosus is actively transmitted both to humans and sheep, and CE is a zoonotic disease of public health priority in Uzbekistan.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.296-301
• /
• 2019

This study was conducted to measure litterfall and nutrient (P, K, Ca, Mg) inputs under varying degrees of disturbance by pine wilt disease in pine forests in southern Korea. Litterfall was collected to evaluate nutrient responses at different intensities of disturbance (various levels of basal area) by pine wilt disease across 2 years. Phosphorus, Ca, and Mg concentrations in needle litterfall were positively correlated (p < 0.05) with decreased disturbance intensities (increased basal area) depending on the time of sampling, whereas the nutrient concentrations in other litterfall components (branches, bark, reproductive organs, and miscellaneous litterfall) were not significantly correlated (p > 0.05) with the intensity of pine wilt disease disturbance. Dry weight and nutrient inputs through litterfall components decreased linearly with increasing intensity of disturbance by pine wilt disease (p < 0.05), except for the nutrient inputs of branch (K, Ca, Mg) and reproductive organ (K, Ca) litterfall. These results indicate that decreased litterfall across different levels of disturbance may be related to the reduced soil nutrients in pine wilt disease forests.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.1991-2003
• /
• 2022

The problem of water contamination by long-living cesium and strontium radionuclides is an urgent environmental issue. The development of facile and efficient technologies based on nanostructured adsorbents is a perspective for selective radionuclides removal. In this regard, current work aimed to obtain the nanostructured magnetic zeolite composites with high adsorption performance to cesium and strontium ions. The optimal conditions of hydrothermal synthesis were established based on XRD, SEM-EDX, N₂ adsorption-desorption, VSM, and batch adsorption experiment data. The role of chemical composition, textural characteristics, and surface morphology was demonstrated. The monolayer ionexchange mechanism was proposed based on adsorption isotherm modeling. The highest Langmuir adsorption capacity of 229.6 and 105.1 mg/g towards cesium and strontium ions was reached for composite obtained at 90 ℃ hydrothermal treatment. It was shown that magnetic characteristics of zeolite composites allowing to separate spent adsorbents by a magnet from aqueous solutions.

• Journal of Korean Society of Forest Science
• /
• v.88 no.2
• /
• pp.195-204
• /
• 1999

To improve nut production and timber quality in a plantation, crown shape controls were suggested for Korean white pines (Pinus koraiensis) under age class III through the analyses of the crown shape controls for seed orchard trees in several species, of crown status of controlled and uncontrolled trees in a Korean white pine seed orchard, and of growth characteristics of plantation trees under age class III. For nut production from the small trees less than 8 m, modified leader type can be applied by cutting the central leader and all branches below 1 m and keeping 4~5 nodes with 3~4 whorled branches a node locating 1 m apart. Trees with a 4~8 m long trunk below the first living branch are shaped into trees for nut and timber production, which have a 4~8 m long knotless stem and a modified leader type crown with 4~5 nodes with 3~4 whorled branches a node at a distance of 1 m. Trees, showing the first living branch at or above 9 m from the surface, are pruned severely for timber production and result in a central leader type containing two fifths of the initial crown. It is advisable to remove the leader and the branches when collecting cones or after/during October to take advantage of easy labor and little resin while cutting. After stem cut, branches showing apical dominance are to be cut to control height when necessary. The removal of the uppermost node may be needed to control the crown shape several years after the initial stem-cut.

• Economic and Environmental Geology
• /
• v.57 no.1
• /
• pp.51-71
• /
• 2024

Seismic exploration is one of the widely used geophysical exploration methods with various applications such as resource development, geotechnical investigation, and subsurface monitoring. It is essential for interpreting the geological characteristics of subsurface by providing accurate images of stratum structures. Typically, geological features are interpreted by visually analyzing seismic sections. However, recently, quantitative analysis of seismic data has been extensively researched to accurately extract and interpret target geological features. Seismic attribute analysis can provide quantitative information for geological interpretation based on seismic data. Therefore, it is widely used in various fields, including the analysis of oil and gas reservoirs, investigation of fault and fracture, and assessment of shallow gas distributions. However, seismic attribute analysis is sensitive to noise within the seismic data, thus additional noise attenuation is required to enhance the accuracy of the seismic attribute analysis. In this study, four kinds of seismic noise attenuation methods are applied and compared to mitigate random noise of poststack seismic data and enhance the attribute analysis results. FX deconvolution, DSMF, Noise2Noise, and DnCNN are applied to the Youngil Bay high-resolution seismic data to remove seismic random noise. Energy, sweetness, and similarity attributes are calculated from noise-removed seismic data. Subsequently, the characteristics of each noise attenuation method, noise removal results, and seismic attribute analysis results are qualitatively and quantitatively analyzed. Based on the advantages and disadvantages of each noise attenuation method and the characteristics of each seismic attribute analysis, we propose a suitable noise attenuation method to improve the result of seismic attribute analysis.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.4
• /
• pp.562-571
• /
• 2008

The principal objective of this study was to assess dietitian's awareness and performance with regard to food suppliers' selection guidelines and purchase guidelines for the receipt of safe food materials. A questionnaire was administered to 203 dietitians working at an elementary school in Gyeonggi North province, and 190 responses were ultimately returned. Excluding responses with incomplete answers and significant missing data, 161 responses(79.3%) were ultimately utilized for data analysis. We determined that meat/poulty and seafood were purchased mainly by manufacturer's branch(59.8% and 78.3%), and processed food and kimchi were generally purchased by producer's cooperatives(47.7% and 44.9%). 78.3% of the contracts were made via informal purchasing and the frequency of contracts was less than 3 times per year(53.4%). Market studies were conducted individually(54.7%), and by group(47.2%). Dietitian and parents volunteered(50.3%) or dietitians, and school and foodservice staffs(45.3%) participated - together in receiving and inspection. School contracted with $4{\sim}5$(39.1%) and $6{\sim}8$ food suppliers(29.8%). Dietitians(42.3%) or school councils(40.2%) evaluated food suppliers once per semester(60.2%). The majority of dietitians(96.3%) conducted sanitary education for food suppliers once per semester (68.3%). All 13 guidelines which were usually used to evaluate food suppliers were thought to be important(more than 4) based on a 5 scale(1: never important, 5: very important). Among them, 'sanitary storage status of food products(4.85)', 'have a chill car(4.83)' and 'proper control of refrigerator, freezer and storage room(4.81)' were the most crucial guidelines. As dietitians evaluated food supplier's-observances of 13 guidelines, 'have a chill car(4.89)', 'hold medical examination of employees(4.89)' and 'hold liability insurance for handling product(4.80)' were fulfilled relatively well. The guidelines for conducting education for their employees(4.45) and keeping their establishment and equipment sanitary(4.79) were important, but were not observed well(3.39 and 3.37). Additionally, the difference between the importance and the observance score of the 'HACCP certificate' were fairly significant(4.44 and 3.54). Dietitians tended to report that purchasing management related to the removal of foodborne illness factors(4.71), return confirmation(4.50) and purchase specification(4.32) were important. The difference between importance and performance was highest in the process of changing food suppliers when the contracts were violated more than three times. Dietitian's age, education work experience and employment type had no observable effects on how important they considered purchase management to be, but their work experience significantly affected performance in terms of the removal of foodborne illness factors(p<0.05). As supplier management is the most critical factor, it is clearly desirable to educate suppliers at specialized training centers and to supervise suppliers in accordance with the established sanitary guidelines.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.2
• /
• pp.54-61
• /
• 2012

In this study, the adsorption of $Cu^{2+}$ from aqueous solution by the biochar derived from woody biomass at different pyrolysis temperatures has been investigated. The woody biomass wastes used in this study were branch of willow ($Salix$ $koreensis$ $Andersson$) and bark of chestnut ($Castanea$ $crenata$ $var.$ $dulcis$). Three biochar samples prepared by heating each biomass at temperature of $300^{\circ}C$, $500^{\circ}C$, and $700^{\circ}C$were tested for the adsorption capacity of Cu. Also the physicochemical properties of the developed biochars were studied using different characterization techniques such as FT-IR, SEM, BET surface area, and cation exchange capacity (CEC). The adsorption of Cu could be well described by Langmuir model for both willow and chestnut biochars with $R^2{\geq}0.98$. The maximum adsorption capacities of the biochar produced at $700^{\circ}C$ from the Langmuir equation were found to be 12.5 mg $g^{-1}$ and 16.9 mg $g^{-1}$ for willow and chestnut, respectively. Chestnut biochar was found to interact more effectively with the active sites available for Cu, resulting higher removal of Cu(II) than wiloow biochar. Ion exchange and surface complexation found to be the main mechanisms involved in the adsorption process. This study demonstrated the feasibility of the biochars derived from woody biomass to be as a low-cost potential adsorbent for heavy metals as Cu(II) removal in aquatic system.

• 한국해양학회지
• /
• v.24 no.1
• /
• pp.15-28
• /
• 1989

A study on quantitative phytoplankton samples, hydrographic conditions (temperature, salinity, dissolved oxygen), and nutrients has been performed in the southern waters of the Korean East Sea in early spring. Phytoplankton community showed close correlation with hydrographic conditions. This study area could be divided into three phytohydrographic regions; 1) East Korean Warm Water Region (a branch of Tsushima Current), 2) North Korean Cold Water Region, and 3) offshore water region not affected by other two water regions. Vertical distribution of phytoplankton is dependent upon stability of water column and nutrient concentration. Nutrient concentration shows characteristic distribution according to water masses. N/P ratio of ca. 3 in surface layer indicates that nitrogen is the major limiting nutrient in this area. N/P removal ratio was 12.54 ($r^2$ = 0.96), consistent with the Redified ratio. Primary nitrite maxima at the nitracline depths are thought to be formed by phytoplankton exudation. Secondary nitrite maximum was observed in coastal area with dissolved oxygen content of >5.2 ml/l much higher than <0.25 ml/l in other areas. The mechanism of secondary maximum is different from that of other regions, and whether it may be due to in situ degradation of organic matter by bacterial activity is still open to discuss.