• Food Science and Biotechnology
• /
• v.14 no.4
• /
• pp.470-473
• /
• 2005

Starch was isolated from turnip (Brassica rapa L.), and to elucidate the structure-function relationship its structural and physical properties were characterized. Morphological structure of the starch was analyzed by SEM (Scanning Electron Microscopy). Most of the starch granules were spherical in shape with diameter ranging from 0.5-10mm. Apart from larger granules ($<10\;{\mu}m$) which dominated the population size of turnip starch, significant amount of small ($0.5-2\;{\mu}m$) and mid-size granules (${\sim}\;{\mu}m$) were also detected. It was revealed that presumably, erosion damages occurred due to the attack of amylase-type enzymes on the surface of some granules. Branch chain-length distribution was analyzed by HPAEC (High-Performance Anion-Exchange Chromatography). The chain-length distribution of turnip starch revealed a peak at DP12 with obvious shoulder at DP18-21. The weight-average chain length ($CL_{avg}$) was 16.6, and a large proportion (11.8%) of very short chains (DP6-9) was also observed. The melting properties of starch were determined by DSC (Differential Scanning Calorimetry). The onset temperature ($T_o$) and the enthalpy change (${\Delta}H$) of starch gelatinization were $50.5^{\circ}C$ and 12.5 J/g, respectively. The ${\Delta}H$ of the retrograded turnip starch was 3.5 J/g, which indicates 28.2% of recrystallization. Larger proportion of short chains as well as smaller average chain-length can very well explain relatively lower degree of retrogradation in turnip starch.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.1
• /
• pp.43-48
• /
• 2008

Fifteen concrete specimens were mixed and tested to explore the significance and limitation of appling the polyvinyl alcohol (PVA) fiber and steel fiber with end hook to concrete. Main parameters investigated were volume fraction and length of the fibers. The measured mechanical properties of fiber reinforced concrete are analyzed according to the equivalent fiber amount index explaining the adding amount and length of fibers. Test results showed that compressive strength of fiber reinforced concrete was higher than that of concrete with no fiber by $10{\sim}20%$. The normalized splitting tensile strength and flexural strength of PVA fiber reinforced concrete were similar to those of concrete with no fiber, whereas those of steel fiber reinforced concrete increased with the increase of the equivalent fiber amount index. In particular, much higher ductile behavior was observed in steel fiber reinforced concrete than in PVA reinforced concrete, indicating that the slope of descending branch of load-displacement relationship of steel fiber reinforced concrete decreased with the increase of the volume fraction and length of the fiber.

• Journal of Korean Society of Forest Science
• /
• v.105 no.1
• /
• pp.73-77
• /
• 2016

In this study, we examined the changes of fruit number and fruit weight according to the length of bearing branch of Actinidia arguta and identified the correlation the length of bearing branch and fruit characteristics. The fruit weight and the fruit number of A. arguta bearing branch which length are below 15 cm and over 30 cm were 11.7 g, 4.3 and 12.3 g, 13.8, respectively. From the results, the bearing brach which length was below 15 cm must be removed in winter season pruning. The pruning experiment was conducted to examine the effects on fruit quality and yield of A. arguta. Total fruit yield of heavy-pruning was $14.3{\pm}1.5kg/tree$. The production of fruits over 15 g wight was $8.2{\pm}0.9kg/tree$, that of fruits between 10 g to 15 g was $4.0{\pm}0.7kg/tree$, and that of fruit below 10 g was $2.1{\pm}0.3kg/tree$, respectively. Average fruit yield of nonpruning was $26.7{\pm}2.1kg/tree$, fruit yield over 15 g, between 10 g and 15 g, and below 10 g were $2.5{\pm}0.5kg/tree$, $19.2{\pm}1.4kg/tree$, and $5.0{\pm}0.6kg/tree$, respectively. Distribution of high quality fruit (over 15 g) showed that non-pruning was almost 15~16 g but pruning was evenly distributed between 15 g and 20 g. According to the survey, The high quality fruit (over 15 g) would not be harvested if the winter pruning is not applied in the A. arguta cultivation.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.4
• /
• pp.307-312
• /
• 2015

This paper addresses mechanical properties and length change performance of the recycled aggregate concretes(RAC) in which natural coarse was replaced by recycled coarse aggregate(RCA) by compressive strength levels(20, 35, 50 MPa). A total of 9 RAC were produced and classified into three series, each of which included three mixes designed with three compressive strength levels of 20 MPa, 35 MPa and 50 MPa and three RCA replacement ratios of 0, 50 and 100%. Physical/Mechanical properties of RAC were tested for slump test, compressive strength, and length change. The test results indicated that the workability of RC could be improved or same by RCA replacement ratios, when compared with that containing no RCA. This is probably because of the RCA shape improving the workability of RAC. Also, the test results showed that the compressive strength was decreased by 9~10% as the RCA replacement ratios increase. However, the length change ratio by the RCA replacement ratios increased regardless of compressive strength levels. At 20 MPa level, the length change ratio was 8~40% which was much higher than that of 4~17% at both 35 and 50 MPa levels. Therefore, it was considered that such admixture addition preventing dry shrinkage is required in order to improve the properties of the RAC at 20 MPa level.

• Smart Structures and Systems
• /
• v.22 no.3
• /
• pp.335-340
• /
• 2018

The behavior of concrete slabs in composite beam with C and L shaped angle shear connectors has been studied in this paper. These two types of angle shear connectors' instalment have been commonly utilized. In this study, the finite element (FE) analysis and soft computing method have been used both to present the shear connectors' push out tests and providing data results used later in soft computing method. The current study has been performed to present the aforementioned shear connectors' behavior based on the variable factors aiming the study of diverse factors' effects on C and L shaped angle in shear connectors. ANFIS (Adaptive Neuro Fuzzy Inference System), has been manipulated in providing the effective parameters in shear strength forecasting by providing input-data comprising: height, length, thickness of shear connectors together with concrete strength and the respective slip of shear connectors. ANFIS has been also used to identify the predominant parameters influencing the shear strength forecast in C and L formed angle shear connectors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2319-2324
• /
• 2012

In this paper, the design of asymmetric branch line couplers using artificial dielectric substrate (ADS) is described. The effective permittivity and permeability increase in ADS because of the lots of the inserted via-holes. So the physical length and width of transmission lines realized on ADS are reduced compared to the standard lines. This enables one to design size-reduced microwave circuits. As an instance in this work, an asymmetric branch line coupler with the ratio of 3:1 is designed at 2GHz. The designed coupler has a small size of 53.4% compared to the normal circuit while the same performances are preserved. A good agreement between the simulated and measured asymmetric power dividing ratio is shown. The measured loss is only less than 0.2dB, which is a very small value.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.1-6
• /
• 2013

This study was conducted to investigate the variation of fruit and seed morphology among populations and among individuals within population of Sorbus commixta Hedl. distributed in Korea. Fruits collected from 42 trees in six natural populations and their six fruit and four seed characteristics were analyzed. In all characteristics, there were significant differences among populations and among individuals within populations. Especially, number of fruits per fruit-bearing branch and number of seeds per fruit showed higher values among populations in total variance component. Coefficients of variation in the number of fruits per fruit-bearing branch and seed weight are relatively high (42.0~75.3%) compared to other traits (11.9~32.1%). As a result of simple correlation analysis, the number of fruits per fruit-bearing branch showed a significant positive correlation with latitude but showed a negative correlation with longitude. According to cluster analysis, geographically close populations showed the tendency of clustering into the same group. Three principal components (PC) were deduced from principal component analysis, which explain the 87% of total variance of fruit and seed characteristics. The highest contribution was seed length and seed weight in PC1, fruit width and seed index in PC2 and fruit length and number of fruits per fruit-bearing branch in PC3.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.5
• /
• pp.19-27
• /
• 2005

The earth is a huge magnet. All organisms live under the magnetism of earth. The magnetism influences the ions in the cells of organisms and variously functions to lives as well. The medical treatment with magnet has come down from the ancient, it has an effect on the plants' growth. But there are no scientific studies about the influences of magnetism on plant growth. Accordingly, the experiment about the influence of magnetism on several foliage plants was carried out in this study. The promotion of plants' growth led by magnetism will be the method to save the management cost of horticultural market by early shipment. As a results of this experiment, plants treated with magnets showed excellent growth especially in length growth. The experiment results of the respective plants are the following. 1. Rhapis flabelliformis : This have grown so very well in the container lined with magnets as time goes by. Showing the significant(p<0.05) differences, the length growth of Height and Length of leaves was especially distinguished. 2. Howea belmoreana : This has grown well in all containers. Showing the significant(p<0.05) differences, the length growth of Height and Length of leaves was especially distinguished. 3. Chamaedorea seifrizii : There have been the growth differences between Height and Length of leaves as time goes by. The growth of Height and Length of leaves in the container lined with magnets has been excellent. The number of leaves and number of branch generally had no big differences but the growth of Height and Length of leaves was excellent in the magnet container. The method of plant growth promotion with magnet should save the management cost for this reason. Therefore the succeeding studies about the plant growth under the influence of magnet intensity and kind must be performed. The studies with various plants are needed to activate the program for growing plants with magnet.

• Ocean Science Journal
• /
• v.41 no.4
• /
• pp.201-205
• /
• 2006

Larval specimens of Halicampus punctatus were collected off Ulsan and Uljin in December 2002 (three specimens) and off Ulsan in December 2003 (one specimen). These specimens are characterized by the following morphological characteristics: rings, 14 + 35 = 49; subdorsal rings, 1 + 3 = 4; dorsal fin rays, 19 - 20; pectoral fin rays, 14 - 15; anal fm rays, 9; head length (HL), 5.8 - 6.7 in the standard length; snout length, 1.9 in HL; snout depth, 3.7 - 5.2 in snout length. The number of caudal fin rays 9 is less than those of the other species in the same genus 10. Wide stripe bands composed of small pigments are shown in the trunk and the tail. Melanophores are not found in the dorsal fin, the pectoral fin, and the anal fin except the caudal fin. The supraoccipital crest is on the head. The frontal ridge is on the dorsal side of front trunk. The blanched ridges on the opercular are fused with a main ridge like a tree branch. A few branched ridges that are small and narrow on the trunk and the tail are fused with the main ridges. We report these specimens as the first record in Korea and name them 'Byeol-sil-go-ki' in Korean.

• The Journal of the Korea Contents Association
• /
• v.3 no.4
• /
• pp.23-28
• /
• 2003

This paper describes, in order to extract contour from topographic map image, an adaptive segment-length thresholding using a threshold depended on target image. First of all, after recognizing the primary symbols and detecting two edges from the projection histogram of the elevation value area, the threshold value is determined by the distance between the edges. Then, the subdivision is peformed by searching a branch point and erasing its neighboring Hack pixels. And contour components are extracted by segment-length thresholding. The experimental result shows that the final image contains non-contour component of 2.41% and contour one of 97.59%.