• 한국산림과학회지
• /
• 제90권6호
• /
• pp.774-780
• /
• 2001

경기도 광릉 중부임업시험장내 임목밀도와 지위가 다른 31년생 리기다소나무임분올 대상으로 3개의 $20{\times}10m$ 조사구를 선정하고 5년 동안(1997~2001) 각 부위별 탄소량 및 탄소 년 증가량을 조사하였다. 각 부위별 탄소함량은 잎>가지>수피>줄기>임상>토양 0~15cm>토양 15~30cm순 이었으며 탄소저장량 및 년 증가량은 임목밀도와 지위에 따라 차이가 있는 것으로 나타났다. 유사한 임목밀도의 경우 지위가 높은 지역이 탄소저장량과 증가량이 높았으며 유사한 지위의 경우 임목밀도에 의해 탄소저장량 및 년 증가량이 차이를 보이고 있다. 조사된 임분의 임목뿌리를 제외한 리기다소나무임분의 총탄소 저장량은 140,600kgC/ha으로 임목 61%, 토양 31%, 임상 8%로 나타났다. 고사목이 많이 발생하였던 2001년도를 제외한 년 평균 탄소 증가량은 3,233kgC/ha/yr로 줄기>가지>수피>잎 순이었다. 31년생 리기다소나무임분의 탄소저장량 및 년 증가량 변화를 조사한 결과 유사한 지위에서는 임목밀도가 높은 것이 지위에 차이가 날때는 임목밀도 조절에 의한 생장량 증가가 탄소흡수능력을 증진 할 수 있을 가능성을 시사한다.

• 아시안잔디학회지
• /
• 제3권1호
• /
• pp.5-12
• /
• 1989

Tiller numbers per Unit area were increased as plant density heightened followed by little difference in tiller number in 110 days after transplanting(ll0DAT), this being caused by the immediate increment of tiller since' 90DAT During the growth period, the greatest number of green leaves per unit area was attained in 90DAT of both 160-density and 200-density plots, and in l00DAT of 40-, 80-, and I 20-density plots. Thus, the period to reach the maximum green leaf number with the high plant density was earlier than with the' low plant density. The increment of plant density increased the DM weight of ahoveground part and, with 40-densitytreatment. DNI weight was increased 6.1 times as much up to 110DAT as up to 7ODAT but 2 to 2.9 times with other ehe'nsity treatments. The' rate of increase in stolon length was greatest at the period between 80 and 90DAT when DM weight of stolon showed a large increment. Meanwhile, the average number of stolon was 1.7 at 70DAT but was increased up to 10 at 110DAT probably due to accelerative appeance of Ist stolon branch since 8.0DAT. DM weight of stolon was found to exceeded that of root after 90DAT Thus it was concluded that, when turfs is estahlished from sprig. it may be desirable for first mowing practice to be made at least within l00 days after planting.

• 한국산림과학회지
• /
• 제82권4호
• /
• pp.406-419
• /
• 1993

천연 활엽수림은 그 경제적, 조림학적 중요성에도 불구하고 아직 우리나라에서는 그에 대한 시업체계가 확립되어 있지 않아, 본 연구에서는 임목의 보육체계 확립을 위한 연구의 일환으로 가지치기 기술 개선에 있어 보다 명확한 기초자료를 얻기 위해, 굴참나무 천연림의 수관구조 및 물질생산구조를 해석하고 그 자료를 기초로 이에 대한 가지치기 방법을 검토하였던바 그 결과를 요약하면 다음과 같다. 먼저 가지의 착지부위 즉, 지하고는 수고 및 직경과의 관계에서 직접적인 영향을 나타내지 않았고, 지하고의 높이는 거의 비슷한 높이에서 분포하고 있었다. 그리고 엽량의 최대층과 가지량의 최대층은 거의 같은 층에 분포하고 있었으며 가지 성장량의 최대층은 이보다 상부에 나타나고 있음을 알 수 있었다. 또한 옹이 없는 간재 생산에 대한 가지의 공헌도는 하층부에서 상층부로 갈수록 높게 나타났다. 그리고 실제 가지치기에 대한 응용 지표를 찾기 위한 방법으로 먼저 가지의 착엽 부위와 미 착엽 부위와의 비율을 수관의 형태적 지표로 삼아 적용하는 방법 모색과, 수관의 길이를 기준으로 일정한 지하고에서 가지치기를 행하는 방법에 관해 검토하고 이에따른 수관의 각 기관에 대한 제거율 등을 구하였다.

• Steel and Composite Structures
• /
• 제30권2호
• /
• pp.141-147
• /
• 2019

Fire is one of the environmental parameters affecting the structure causing element internal forces to change, as well as reducing the strength of the materials. One of the common types of floors in tall steel structures is the steel concrete composite slab. Shear connectors are used in steel and concrete composite beam in various shapes also has played significant role in a burning fire event of building with a steel concrete composite beam. The current study has reviewed the effects of temperature raising on the angle connector behavior through the use of push out tests and monotonic static force. The results have shown (1) the ductility of the samples is acceptable based on EC4 standard; (2) temperature raising has reduced the stiffness; (3) the shear ductility increment; and (4) the shear capacity reduction. Also, the amount of angle shear connector resistance has been decreased from 18.5% to 41% at ambient temperature up to $850^{\circ}C$.

• 한국산림과학회지
• /
• 제5권1호
• /
• pp.27-32
• /
• 1966

Taking an opportunity of the application of clearcutting method, 140 red pine (Pinus densiflora Sieb. et Zucc.) trees grown at Chon-nam province, the southern part of South Korea, were fellen and the tree height, clear-bole length, D.B.H. diameter at base(0.2m above from the ground line) and the length of the longest branch were measured. The correlation between factors mentioned were analysed. The results are summarized as follows: 1. The correlation between crown length and tree height (r=0.821) was sinificant. 2. The correlation between the diameter at base and D.B.H. was highly significant (r=0.961). D.B.H. can be calculated from multiplying the diameter at base by 0.88. 3. A weak relation between D.B.H and tree height was abserved. 4. The positive correlation between tree height and clear-bole-length was calculated, but it was not sharp between D.B.H. and the length of the longest branch. 5. The height, basal area, D.B.H. and volume increment by tree class calculated from the data of the stem analysis are presented (Tab. 3~10).

• Ocean and Polar Research
• /
• 제22권1호
• /
• pp.37-43
• /
• 2000

Epiphytic communities on marine plants of Seychelles (Indian Ocean Island group associated with East Africa) were investigated in January - March of 1989 during the $15^{th}$ biological voyage of the research vessel cademic Alexander Nesmeyanov. A seagrass species, Thalassodendron ciliatum, and macroalgae (Sargassum spp. and Halimeda spp.) were tested for host substrates and biomass of their dominant epiphytes were assessed. Also, in order to understand the effect of shading and nutrient filtering by epiphytes, two series of photosynthetic rates were compared for Th. ciliatum host leaves having 10% and no epiphytes. Total of 84 species of algae and main taxons of benthic animals were identified from three different host plants. An average biomass of the epiphytes on Th. cihiatum was $184.6g\;kg^{-1}$ and dominant species were green alga Halimeda opuntia, red algae Dictyurus occidentalis and Gelidiella myrioclada. These dominant species and their biomass were remarkably varied with depth increment. On Sargassum spp., an average biomass of the epiphytes was $0.18g\;kg^{-1}$ and the maximum biomass was never exceeded $0.16g\;kg^{-1}$. In the case of Halimeda spp. an average biomass of the epiphytes was $8.0g\;kg^{-1}$, and dominant species were Peyssonnelia dubyi, sponges and decapods. Photosynthetic rates of Th. ciliatum were significantly reduced in the leaves having 10% epiphytes (1.72 times lower, t=6.718, p<0.001).

• 대한후두음성언어의학회지
• /
• 제5권1호
• /
• pp.5-10
• /
• 1994

1) 공기양이 증가함에 따라 성문하압(Psub)은 증가하였으나, 성문저항(R)은 감소하였다. 2) 공기양이 증가함에 따라 소리 크기(Intensity)는 증가하였다. 3) 공기양이 증가함에 따라 성문개방율(OQ)은 증가하였다. 4) 가성영역(falsetto)에서 공기양의 증가는 기본 주파수(Fo)를 증가시켰으나, 지성영역 (modal)에서는 일률적인 변화를 보이지 않았다. 5) 갑상피열분지(TA branch)를 함께 자극했을 때(modal)는 그렇지 않을 때(falsetto)에 비하여, 성문하압(Psub), 성문저항(R), 소리 크기(intensity), 기본주파수(Fo)는 모두 증가하였으나, 성문개방율(OQ)은 감소하였다.

• Advances in concrete construction
• /
• 제11권5호
• /
• pp.429-445
• /
• 2021

With regard to economic efficiency, composite fix beams are widely used to pass longitudinal shear forces across the interface. The current knowledge of the composite beam load-slip activity and shear capability are restricted to data from measurements of push-off. Modelling and analysis of the composite beams based on Euro-code 4 regarding to shear, bending, and deflection under differing loads were carried out using Finite Element through an efficient computer simulation and the final loading and sections capacity based on the failure modes was analysed. In bending, the section potential was increased by an improvement of the strength in both steel and concrete, but the flexural and compressive resistance growth is very weak (3.2% 3.1% and 3.0%), while the strength of the concrete has increased respectively from 25 N/mm² to 30, 35, and 40 N/mm² compared to the increment of steel strength by 27% and 21% when it was raised from 275 to 355 and 460 N/mm², respectively. It was found that the final flexural load capacity of fix beams was declined with increase in the fix beam span for both three steel strength. The shear capacity of sections was remained unchanged at constant steel strength and different length, but raised with final yield strength increment of steel sections by 29%, and 67% when it was raised from 275 N/mm² to 355 N/mm² and 460 N/mm², respectively.

• Advances in nano research
• /
• 제9권1호
• /
• pp.33-45
• /
• 2020

Geometrically nonlinear buckling of functionally graded magneto-electro-elastic (FG-MEE) nanoshells with the use of classical shell theory and nonlocal strain gradient theory (NSGT) has been analyzed in present research. Mathematical formulation based on NSGT gives two scale coefficients for simultaneous description of structural stiffness reduction and increment. Functional gradation of material properties is described based on power-law formulation. The nanoshell is under a multi-physical field related to applied voltage, magnetic potential, and mechanical load. Exerting a strong electric voltage, magnetic potential or mechanical load may lead to buckling of nanoshell. Taking into account geometric nonlinearity effects after buckling, the behavior of nanoshell in post-buckling regime can be analyzed. Nonlinear governing equations are reduced to ordinary equations utilizing Galerkin's approach and post-buckling curves are obtained based on an analytical procedure. It will be shown that post-buckling curves are dependent on nonlocal/strain gradient parameters, electric voltage magnitude and sign, magnetic potential magnitude and sign and material gradation exponent.

• Membrane and Water Treatment
• /
• 제7권5호
• /
• pp.463-476
• /
• 2016

In this study, application of polypropylene hollow fiber membrane contactors for $CO_2$ removal from water in liquid-liquid extraction (LLE) mode was simulated. For this purpose, a steady state 2D mathematical model was developed. In this model axial and radial diffusion was considered to $CO_2$ permeation through the hollow fibers. $CO_2$ laden water is fed at a constant flow rate into the lumen side, permeated through the pores of membrane and at the end of this process, $CO_2$ solution in the lumen side was extracted by means of aqueous diethanolamine (DEA) and chemical reaction. The simulation results were validated with the experimental data and it was found a good agreement between them, which confirmed the reliability of the proposed model. Both simulation and experimental results confirmed the reduction in the percentage of $CO_2$ removal by increment of feed flow rate.