• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.774-780
• /
• 2001

Aboveground carbon storage and increment of a 31-year-old pitch pine (Pinus rigida) stand were measured for five years (1997~2001) in the Jungbu Forest Experiment Station, Gyeonggi-do, Korea. The carbon concentration in each component of aboveground and soil depth decreased in the order of needle>branch>stembark>stemwood>forest floor>0-15cm soil depth>15-30cm soil depth. The carbon storage except for root carbon was 140,600kgC/ha and the tree accounted for 61%, soil 31% and forest floor 8% of the stand carbon storage. Due to high tree mortality by Fusarium subglutinans infection and spring drought in 2001, carbon increment except for 2001 data was 3,233kgC/ha/yr and was in the order of stemwood>branch>stembark>needle. Carbon storage and increment were attributed to stand density and site quality. Carbon storage and increment were higher in the high site quality than in the lower site quality plot on similar tree density. Also, the high tree density site on similar site quality showed more carbon storage and increment compared with the lower tree density. The results suggest that site quality and tree density are a key factor determining carbon storage and increment in this pitch pine stand.

• Asian Journal of Turfgrass Science
• /
• v.3 no.1
• /
• pp.5-12
• /
• 1989

Tiller numbers per Unit area were increased as plant density heightened followed by little difference in tiller number in 110 days after transplanting(ll0DAT), this being caused by the immediate increment of tiller since' 90DAT During the growth period, the greatest number of green leaves per unit area was attained in 90DAT of both 160-density and 200-density plots, and in l00DAT of 40-, 80-, and I 20-density plots. Thus, the period to reach the maximum green leaf number with the high plant density was earlier than with the' low plant density. The increment of plant density increased the DM weight of ahoveground part and, with 40-densitytreatment. DNI weight was increased 6.1 times as much up to 110DAT as up to 7ODAT but 2 to 2.9 times with other ehe'nsity treatments. The' rate of increase in stolon length was greatest at the period between 80 and 90DAT when DM weight of stolon showed a large increment. Meanwhile, the average number of stolon was 1.7 at 70DAT but was increased up to 10 at 110DAT probably due to accelerative appeance of Ist stolon branch since 8.0DAT. DM weight of stolon was found to exceeded that of root after 90DAT Thus it was concluded that, when turfs is estahlished from sprig. it may be desirable for first mowing practice to be made at least within l00 days after planting.

• Journal of Korean Society of Forest Science
• /
• v.82 no.4
• /
• pp.406-419
• /
• 1993

In spite of the economical and sivicultural importance, tending methods of natural broad leaf tree have not been established in Korea. In the present study, the structure of crown and biomass of Quercus variabilis were analyzed to obtain the basic information on pruning practice. There was not correlated between clear length of sample tree and tree height and D.B.H. The stratum with the largest leaf and branch weight was lower part of the stratum with the largest branch increment. The degree of contribution of branch to knotless trunk production (${\Delta}{\omega}_B(Z)/{\omega}_B(Z)$ and ${\omega}_L(Z)/{\omega}_B(Z)$) decreased from the upper part to the lower part. As an example of the application of the ecological data to pruning practice, the author attempted to estimate the effect of pruning with this experimental stand. Two methods of pruning were investigated. One is the removal of branches according to a definite external indication such as clear length rate of branch, and the other is the removal of barnches according to a definite height.

• Steel and Composite Structures
• /
• v.30 no.2
• /
• pp.141-147
• /
• 2019

Fire is one of the environmental parameters affecting the structure causing element internal forces to change, as well as reducing the strength of the materials. One of the common types of floors in tall steel structures is the steel concrete composite slab. Shear connectors are used in steel and concrete composite beam in various shapes also has played significant role in a burning fire event of building with a steel concrete composite beam. The current study has reviewed the effects of temperature raising on the angle connector behavior through the use of push out tests and monotonic static force. The results have shown (1) the ductility of the samples is acceptable based on EC4 standard; (2) temperature raising has reduced the stiffness; (3) the shear ductility increment; and (4) the shear capacity reduction. Also, the amount of angle shear connector resistance has been decreased from 18.5% to 41% at ambient temperature up to $850^{\circ}C$.

• Journal of Korean Society of Forest Science
• /
• v.5 no.1
• /
• pp.27-32
• /
• 1966

Taking an opportunity of the application of clearcutting method, 140 red pine (Pinus densiflora Sieb. et Zucc.) trees grown at Chon-nam province, the southern part of South Korea, were fellen and the tree height, clear-bole length, D.B.H. diameter at base(0.2m above from the ground line) and the length of the longest branch were measured. The correlation between factors mentioned were analysed. The results are summarized as follows: 1. The correlation between crown length and tree height (r=0.821) was sinificant. 2. The correlation between the diameter at base and D.B.H. was highly significant (r=0.961). D.B.H. can be calculated from multiplying the diameter at base by 0.88. 3. A weak relation between D.B.H and tree height was abserved. 4. The positive correlation between tree height and clear-bole-length was calculated, but it was not sharp between D.B.H. and the length of the longest branch. 5. The height, basal area, D.B.H. and volume increment by tree class calculated from the data of the stem analysis are presented (Tab. 3~10).

• Ocean and Polar Research
• /
• v.22 no.1
• /
• pp.37-43
• /
• 2000

Epiphytic communities on marine plants of Seychelles (Indian Ocean Island group associated with East Africa) were investigated in January - March of 1989 during the $15^{th}$ biological voyage of the research vessel cademic Alexander Nesmeyanov. A seagrass species, Thalassodendron ciliatum, and macroalgae (Sargassum spp. and Halimeda spp.) were tested for host substrates and biomass of their dominant epiphytes were assessed. Also, in order to understand the effect of shading and nutrient filtering by epiphytes, two series of photosynthetic rates were compared for Th. ciliatum host leaves having 10% and no epiphytes. Total of 84 species of algae and main taxons of benthic animals were identified from three different host plants. An average biomass of the epiphytes on Th. cihiatum was $184.6g\;kg^{-1}$ and dominant species were green alga Halimeda opuntia, red algae Dictyurus occidentalis and Gelidiella myrioclada. These dominant species and their biomass were remarkably varied with depth increment. On Sargassum spp., an average biomass of the epiphytes was $0.18g\;kg^{-1}$ and the maximum biomass was never exceeded $0.16g\;kg^{-1}$. In the case of Halimeda spp. an average biomass of the epiphytes was $8.0g\;kg^{-1}$, and dominant species were Peyssonnelia dubyi, sponges and decapods. Photosynthetic rates of Th. ciliatum were significantly reduced in the leaves having 10% epiphytes (1.72 times lower, t=6.718, p<0.001).

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.5 no.1
• /
• pp.5-10
• /
• 1994

In vivo canine model was made in two mongrel dogs under the general Ⅰ-Ⅴ anesthesia. A vertical skin incision was made on the neck, the larynx and the trachea were dissected. Two tracheal openings were made : lower one for the insertion of the anesthesia tube and upper one for the delivery of air to the larynx to induce phonation. External branch of the superior laryngeal nerves and recurrent laryngeal nerves bilaterally were identified and stimulated electrically constantly. Subglottic pressure. fundamental frequency, intensity, and open quotient were measured when the air flow rate was varying low, medium and high. Glottic resistence was calculated. As the air flow rate was increased, the subglottic pressure and the sound intensity were increased. However, glottic resistance was decreased as the air flow was increased. In falsetto register, fundamenatal frequency was increased with the increment of air flow, but in modal register fundamental frequency was not increased statistically significant Open quotient by the electroglottography was increased according to the increment of airflow.

• Advances in concrete construction
• /
• v.11 no.5
• /
• pp.429-445
• /
• 2021

With regard to economic efficiency, composite fix beams are widely used to pass longitudinal shear forces across the interface. The current knowledge of the composite beam load-slip activity and shear capability are restricted to data from measurements of push-off. Modelling and analysis of the composite beams based on Euro-code 4 regarding to shear, bending, and deflection under differing loads were carried out using Finite Element through an efficient computer simulation and the final loading and sections capacity based on the failure modes was analysed. In bending, the section potential was increased by an improvement of the strength in both steel and concrete, but the flexural and compressive resistance growth is very weak (3.2% 3.1% and 3.0%), while the strength of the concrete has increased respectively from 25 N/mm² to 30, 35, and 40 N/mm² compared to the increment of steel strength by 27% and 21% when it was raised from 275 to 355 and 460 N/mm², respectively. It was found that the final flexural load capacity of fix beams was declined with increase in the fix beam span for both three steel strength. The shear capacity of sections was remained unchanged at constant steel strength and different length, but raised with final yield strength increment of steel sections by 29%, and 67% when it was raised from 275 N/mm² to 355 N/mm² and 460 N/mm², respectively.

• Advances in nano research
• /
• v.9 no.1
• /
• pp.33-45
• /
• 2020

Geometrically nonlinear buckling of functionally graded magneto-electro-elastic (FG-MEE) nanoshells with the use of classical shell theory and nonlocal strain gradient theory (NSGT) has been analyzed in present research. Mathematical formulation based on NSGT gives two scale coefficients for simultaneous description of structural stiffness reduction and increment. Functional gradation of material properties is described based on power-law formulation. The nanoshell is under a multi-physical field related to applied voltage, magnetic potential, and mechanical load. Exerting a strong electric voltage, magnetic potential or mechanical load may lead to buckling of nanoshell. Taking into account geometric nonlinearity effects after buckling, the behavior of nanoshell in post-buckling regime can be analyzed. Nonlinear governing equations are reduced to ordinary equations utilizing Galerkin's approach and post-buckling curves are obtained based on an analytical procedure. It will be shown that post-buckling curves are dependent on nonlocal/strain gradient parameters, electric voltage magnitude and sign, magnetic potential magnitude and sign and material gradation exponent.

• Membrane and Water Treatment
• /
• v.7 no.5
• /
• pp.463-476
• /
• 2016

In this study, application of polypropylene hollow fiber membrane contactors for $CO_2$ removal from water in liquid-liquid extraction (LLE) mode was simulated. For this purpose, a steady state 2D mathematical model was developed. In this model axial and radial diffusion was considered to $CO_2$ permeation through the hollow fibers. $CO_2$ laden water is fed at a constant flow rate into the lumen side, permeated through the pores of membrane and at the end of this process, $CO_2$ solution in the lumen side was extracted by means of aqueous diethanolamine (DEA) and chemical reaction. The simulation results were validated with the experimental data and it was found a good agreement between them, which confirmed the reliability of the proposed model. Both simulation and experimental results confirmed the reduction in the percentage of $CO_2$ removal by increment of feed flow rate.