• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.83-86
• /
• 2002

In this study, we evaluate the effectiveness of a switch installation between on the radial and loop lateral feeders to increase reliability by decreasing the duration of the outage. These results can help power utility to design the switch layouts on the radial and loop lateral feeder system.

• 한국인터넷방송통신학회논문지
• /
• 제18권2호
• /
• pp.177-184
• /
• 2018

본 논문에서는 $1{\times}6$ 배열 패치 안테나의 복사기 구조와 급전선 브랜치의 각도를 변화시켜 안테나의 특성을 분석하였다. 첫 번째로 복사기 구조를 기존 직사각형 패치를 육각형 패치, 삼각형 패치로 변경하였다. 두 번째로 급전선 브랜치의 각도를 $5^{\circ}$, $10^{\circ}$, $15^{\circ}$, $20^{\circ}$ 로 변화를 주었다. 브랜치 각도를 $10^{\circ}$로 꺾을 경우 측정된 10dB 주파수 대역은 23.38GHz-24.19GHz이고 대역폭은 810MHz이다. 제작된 안테나는 24.05GHz에서 9.65-10.06dBi 이득을 갖는다. 메인로브의 빔폭은 $12^{\circ}$이고, 안테나 크기는 $70{\times}36mm^2$이다. 직사각형 패치 외에 다른 모양의 패치를 사용해도 기존 성능을 유지할 수 있으며, 급전선 브랜치를 다양한 각도로 변화시킴으로 배열 안테나 제작에 있어 기판의 크기를 줄이고 제작상에 다양성에 기여할 수 있음을 확인했다.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권11호
• /
• pp.566-574
• /
• 2000

This paper propose a heuristic algorithm based on the Branch-Exchange (BE) method to solve Optimal feeder Routing(OFR) problem for the distribution system planning. The cost function of the OFR problem is consisted of the investment cost representing the feeder installation and the system operation cost representing the system power loss. We propose a properly designed heuristic strategy, which can handle the horizon-year expansion planning problem of power distribution network. We also used the loop selection method which can define the maximum loss reduction in the network to reduce calculation time, and proposed a new index of power loss which is designed to estimate the power loss reduction in the BE. The proposed index, can be considered with both sides, the low voltage side and voltage side branch connected with tie one. The performances of the proposed algorithms and loss index were shown with 32, 69 example bus system.

• Journal of Mechanical Science and Technology
• /
• 제20권7호
• /
• pp.1030-1042
• /
• 2006

An experimental study has been performed to investigate the off-take phenomena at the header-feeder systems (horizontal header pipe with multiple feeder branch pipes) in a CANDU (CANadian Deuterium Uranium) reactor with the branch orientation varies ${\pm}36^{\circ}\;or\;{\pm}72^{\circ}$. In order to evaluate the applicability of the conventional correlations used in the safety analysis code, RELAP5-Mod3, the test facility is designed with the 1/2 scale of the. CANDU 6. It was found that the data set for the top, bottom and side branches are in a good agreement with the correlations used. However, for the specific angled branches, ${\pm}36^{\circ}\;and\;{\pm}72^{\circ}$, the onsets of off-take data and quality data showed large deviation with the conventional model inside RELAP5-MOD3. Furthermore, based on the uncertainty analysis, the conventional 2.5 power law needs to be modified. The present experimental data set can be useful for the construction of the general correlation considering the arbitrary branch orientation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.99-101
• /
• 1993

This paper presents an approach to feeder reconfiguration in order to achieve an efficient operation of distribution systems utilizing knowledge base. The optimal feeder reconfiguration in this study eliminates various abnormal states which will create feeder overloads and feeder constraint problems. and will also accomplish minimum power loss of the distribution systems under normal operating condition by means of branch exchanges to change the status of sectionalizing switches with experiences of the experts. For an effective implementation of feeder reconfiguration, a best-first tree searching strategy based on heuristics is employed to evaluate the various alternatives of load transfer. The heuristic exchange of branches results in reduction of the search space as a means of implementing the best-first searching strategy.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 추계종합학술대회
• /
• pp.116-119
• /
• 1999

This paper presents a feeder waveguide array of slot array antennas for Direct Broadcasting from Satellite(DBS). The feed structure consists of a single waveguide placed on the same layer as radiating waveguide and is characterized by the unit divider, called a $\pi$-Junction. This K-function with an inductive wall splits part of the power into two branch waveguide through one coupling window, and can excite densely arrayed waveguide at equal phase and amplitude. The power dividing characteristics of a cascade of $\pi$ -functions are analyzed by Galerkin's method of moments. From the optimum simulation results based on the feeder waveguide using $\pi$ -Junction at 3.95GHz, we obtained the scattering matrices of the feeder divided power at 11.85CHz.

• Nuclear Engineering and Technology
• /
• 제36권2호
• /
• pp.142-152
• /
• 2004

The liquid entrainment and vapor pull-through offtake model of RELAP5/MOD3 had been developed for SBLOCA (Small Break Loss of Coolant Accident). The RELAP5/MOD3 model for horizontal volumes accounts for the phase separation phenomena and computes the flux of mass and energy through a branch when stratified conditions occur in the horizontal pipe. In the case of CANDU reactor, this model should be used in the coolant flow of 95 feeders connected to the reactor header component under the horizontal stratification in header. The current RELAP5 model can treat the only 3 directions junctions; vertical upward, downward, and side oriented junctions, and thus improvements for the liquid entrainment and vapor pull-through model were needed for considering the exact angles. The RELAP5 off-take model was modified and generalized by considering the geometric effect of branching angles. Based on the previous experimental results, the critical height correlation was reconstructed by use of the branch line connection angle and validation analyses were also performed using SET. The new model can be applied to vertical upward, downward and angled branch, and the accuracy of the new correlations is more improved than that of RELAP5.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1097-1099
• /
• 1998

This paper describes methods to quickly reconfigure the branch in a distribution system by using tie-line switches without branch overloading and feeder overloading, voltage in load points, and distribution system is represented by object-based structure to search efficiently.

• 전기학회논문지
• /
• 제62권10호
• /
• pp.1376-1382
• /
• 2013

This paper analyzes the propagation characteristics of lightning surge according to the type of branch line in distribution system. The types of branch line considered are H-type and PI-type. At each type, the length of main feeder is same, while the number and length of branch line are different. The distribution line is modeled and the various lightning locations are simulated by Electromagnetic Transient Program(EMTP). For each lightning, the various measuring points are selected. Based on the simulation results, the propagation characteristics of lightning surge at each measuring point are analyzed. The analyzed results are verified by travelling wave theory.

• 한국전자파학회논문지
• /
• 제22권6호
• /
• pp.598-604
• /
• 2011

본 논문은 연결된 결합 선로를 이용하여 브랜치 선로 결합기를 소형화하는 방법을 제시하였다. 이 방법은 기존 마이크로스트립 브랜치 선로 결합기에 사용되는 ${\lambda}/4$ 선로를 같은 특성을 갖는 연결된 결합 선로로 대신한 방법이다. 연결된 결합 선로는 우-기 모드 해석 방법을 기반으로 Z 파라미터와 T 등가 회로로 분석하였다. 이 결과를 이용하여 연결된 결합 선로를 갖는 브랜치 선로 결합기를 중심 주파수 2.4 GHz에서 FR4 기판으로 설계하고 제작하였다. 실험 결과는 이론값과 잘 일치했다. 그리고 실험 결과, 기존 단일 마이크로스트립 선로로 구현된 결합기보다 37 % 크기가 줄어들었음을 확인할 수 있었다. 이 방법은 앞으로 이동 통신 빔 형성 안테나의 급전선인 Butler Matrix의 크기를 줄이는 방법으로 사용 가능하리라 사료된다.