• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.35-42
• /
• 2020

Torsional behavior due to the plane irregularities of the piloti building can cause excessive story drift in the torsionally outermost column, which can lead to shear failure of the column. As a seismic retrofit method that can control the torsional behavior of the piloti building, the expansion of RC wall, steel frame or steel brace may be used, but such methods may hinder the openness of the piloti floor. Therefore, in this study, linear dynamic analysis and nonlinear static analysis for piloti buildings retrofitted by knee brace were performed, and seismic performance evaluation and torsion control effect of knee brace were analyzed. The results showed that the shear force of the column increased when the piloti building retrofitted by knee brace, but it was effective in controlling the torsional deformation. In case of retrofit between knee brace and column by 30°, the shear force of the column increased less than that of 60°, and the lateral displacement of column was decreased in the order of □, ◯ and Ｈ in cross-section.

• Physical Therapy Korea
• /
• v.3 no.3
• /
• pp.59-66
• /
• 1996

The purpose of this study was to assess the biomechanical effects of corset and back brace for low back pain syndroms patients. The subjects of this study were 69 patients with low back pain syndroms who had been hospitalized or were visited out-patient department of the rehabilitation hospital, college of medicine, Yonsei University, from October 5, 1995 through November 5, 1995. Clinical results and datum were obtained by phone calls and chart reviews of low back pain patients. The results were as follows: 1) Fifty - nine subjects recovered over a good grade (85.6%). 2) The standing workers had a little effect of brace for low back pain. 3) After using a corset and back brace, the test of SLR increased from 36.23% to 72.47%, and the ability of ambulation improved from 40.57% to 85.5%. In conclusion, the biomechanical effects of corset and back brace for low back pain patients were found to be decrease pains and improve posture and ADL function.

• Steel and Composite Structures
• /
• v.47 no.1
• /
• pp.135-145
• /
• 2023

This study presents a numerical investigation into the hysteretic behavior of cold-formed austenitic stainless steel square hollow section (SHS) brace members using a commercial finite element (FE) analysis software ABAQUS/Standard. The initial/post buckling and fracture life of SHS brace members are comprehensively investigated through parametric studies with FE models incorporating ductile fracture model, which is validated against the existing laboratory test results collected from the literature. It is found that the current predictive models are applicable for the initial buckling strengths of SHS brace members under cyclic loading, while result in significant inaccuracy in predictions for the post-buckling strength and fracture life. The modified predictive model is therefore proposed and the applicability was then confirmed through excellent comparisons with test results for cold-formed austenitic stainless SHS brace members.

• The Journal of Korean Physical Therapy
• /
• v.30 no.4
• /
• pp.141-145
• /
• 2018

Purpose: Changes in the curvature of the vertebral columns of elderly women with increasing age causes various side effects and disorders. Therefore, this study was conducted to evaluate the effectiveness of the 8-figure scapular brace to improve pulmonary function and balance ability based on lung capacity and foot pressure by increasing the vertebral curvature. Methods: Seventeen elderly women with a forward head posture were selected. Women were asked to wear the 8-figure scapular brace and the forced expiratory volume in 1 second (FEV1) and forced vital capacity (FVC) were measured, as were changes in foot pressure. Measurements were conducted three times each and the mean values were used for subsequent analyses. For static evaluation, we used the paired t-test to identify differences between pre and post values. Results: There was no significant difference in FEV1 and FVC before and after use of the brace (p>0.05); however, there was a significant decrease in forefoot pressure and an increase in rearfoot pressure following application of the brace (p<0.05). Conclusion: Application of the 8-figure scapular brace to correct vertebral curvature in elderly women influenced pressure distribution change from immediate effect body arrange of cervical and thoracic. However, wearing the 8-figure scapular brace may interfere with expansion of the chest and therefore respiratory muscle activity. Accordingly, it is necessary to apply appropriate treatment when wearing a scapular brace and to allow a sufficient intervention period while also providing therapeutic interventions such as posture correction or respiration training.

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.597-603
• /
• 2019

We obtained a Dicom file using a CT (Computed Tomography), a diagnostic test device used in clinical practice. Dicom files and 3D programs, and finger printers with 3D printers. Because the finger brace is intended for the human body, the accuracy of the shape is very important. 3D Print has the advantage of high precision, variety of materials, and short output time. In clinic, aluminum protector or medical device manufacturer's finger protector is limited. By creating a finger brace with a 3D printer, we expect to be able to apply a precise form of a custom finger brace to the patient that can be used to treat a patient's finger trauma, illness, or deformity.

• Journal of Acupuncture Research
• /
• v.22 no.4
• /
• pp.21-26
• /
• 2005

Objectives : This study is designed to evaluate the Effectiveness of dynamic corrective brace on patient of idiopathic scoliosis. Methods : We have investigated 3 patients with idiopathic scoliosis, confirmed X-ray and weared dynamic corrective brace from December 2003 to December 2004. Results : After 12 months of application with dynamic corrective brace, One case, the T-spine Cobb's angle correctability was 47% and the L-spine was 84%, another case, the L-spine Cobb's angle correctability was 59%, the other case, the T-spine Cobb's angle correctability was 32% and the L-spine was 52%. Conclusion : These results suggest that the dynamic corrective brace was effective treatment modality on patient of idiopathic scoliosis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.10-17
• /
• 2020

The recent earthquake in Korea caused large and small damages to many school building. School building is an important building that is used as a shelter in the event of disaster. Among the seismic retrofit methods, the internal steel braced frame type method is used for its relatively easy construction and excellent performance. In this study, the maximum shear force and displacement were compared and examined by applying the brace frame to existing concrete school buildings. As a result, we verified the adequacy of the analytical model and compared and examined the effect of brace-height ratio on the span of the existing school buildings. The adequacy of the maximum shear force and displacement relationship can be confirmed in the model with a length of 0.3. In addition, seismic frame was applied to the actual non-seismic reinforced concrete school building, and the seismic performance was evaluated by nonlinear static analysis(Push-over analysis) according to the ratio of brace-height. As a result, the increase of the brace-height according to the brace-height ratio has the effect of increasing the maximum shear force and maximum load at the performance point. But the collapse of the braced frame due to the increase in the lateral stiffness occurred, indicating that seismic retrofit according to the proper brace-height is necessary. Therefore, in the seismic retrofit design of brace frame of existing school building, it is necessary to select the proper brace-height after retrofit analysis according to the brace-height ratio.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.3
• /
• pp.149-157
• /
• 2019

Purpose : This study aims to check the relationship between the size of curvature in scoliosis patients and the reduction rate of curvature after wearing a brace and the relationships of the size of curvature and correction angle with Body Mass Index (BMI). Methods : With 30 adolescent girls who had never worn a brace, their Cobb angle and BMI were measured before manufacturing braces, and their corrected Cobb angle was measured after wearing the manufactured scoliosis braces. Results : The size of the major curvature before wearing the brace and the reduction rate of the curvature after putting it on had a negative correlation in both the major curvature (r=-.465, p<.01) and the minor curvature (r=-.516, p<.01). The size of the minor curvature and the reduction rate of the minor curvature before and after putting it on also had a negative correlation (r=-.429, p<.05). As for the relationship between the size of curvature and BMI, they had a negative correlation in both the major curvature (r=-.141) and the minor curvature (r=-.123), and as for the relationship between the reduction rate of curvature and BMI after wearing the brace, they had a positive correlation in both the major curvature (r=.251) and the minor curvature (r=.136); however, it was not statistically significant (p>.05). Conclusion : In conclusion, the larger the size of curvature, the lower the reduction rate of curvature after wearing the brace became. The larger the size of curvature, the lower the BMI became. The higher the BMI, the higher the correction ratio of the brace became. Therefore, it is judged that it is necessary to provide early treatment and manage body composition before scoliosis progresses.

• Journal of Chest Surgery
• /
• v.40 no.5 s.274
• /
• pp.369-375
• /
• 2007

Background: Patients suffering with pectus carinatum complain of cosmetic problems when they stand and this in spite of wearing cloths. The standard surgical treatment of pectus carinatum is resection of the deformed cartilages, but the wide operative scar, post-operative pain and complications related with such an operation can occur. Therefore, we have peformed compressive brace therapy as a non-operative treatment for pectus carinatum and we observed the effects and the efficiency of this treatment. Material and Method: From January, 2001 to December, 2006, 109 patients wore the compressive brace for all day. The degree of satisfaction was evaluated after $6\sim9$ months of wearing the compressive brace. The degree of satisfaction was evaluated by a score of from $1\sim4$. A score of 1 was assigned when the status was worse, 2 when it was the same, 3 when there was partial improvement and 4 when remarkable improvement was observed. The degree of satisfaction was assessed subjectively by the parent if the patient was a child younger than middle school age, and the patients older than middle school age assessed the score themselves. Result: The mean score of the overall degree of satisfaction was $3.93{\pm}0.33$. Recurrence of pectus carinatum after removal of compressive brace occurred in 6 patients (5.5%) of the total 109 patients. But 4 patients of the total 6 recurred patients stopped wearing of compressive brace against our advice. The 6 recurred patients were re-corrected by re-wearing the compressive brace within 3 months after they originally removed the compressive brace. The complications were discomfort with initially wearing the compressive brace, which occurred in all patients, skin rash due to the compressive brace for 76 patients (69.7%) and skin discolorization with excessive compression for f6 patients (5.5%). The skin rash and discolorization returned to normal within a few months after removal of the compressive brace. Conclusion: This study demonstrated that non-surgical treatment with using the compressive brace for patients with pectus carinatum was effective, and especially for children and teenagers. Non-surgical treatment with using a compressive brace would be helpful for the patients suffering with pectus carinatum and who dislike surgical operations because of their fear about general anesthesia and operation-related complications. Yet long-term follow up is necessary to accurately evaluate the effectiveness of this compressive brace and the recurrences after removal of the compressive brace.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.5 s.78
• /
• pp.617-625
• /
• 2005

The brace is often used to resist lateral force such as that exerted by an earthquake. Because of buckling at bifurcation load, the brace shows unstable hysteretic characteristics in the plastic zone. Therefore, in this study, the brace with damper that consists of slit plates were suggested on the purpose of preventing buckling and increasing plastic deformation capacity. The experimental results regarding the brace member were analyzed and the feasibility was also examined.