It is well known that there is an inverse relationship between the strength of Indian summer monsoon Rainfall (ISMR) and extent of Eurasian snow cover/depth in the preceding season. Tibetan snow cover/depth also affects the Asian monsoon rainy season largely. The positive correlation between Tibetan sensible heat flux and southeast Asian rainfall suggest an inverse relationship between Tibetan snow cover and southeast Asian rainfall. Developments in Regional Climate Models suggest that the effect of Tibetan snow on the ISMR can be well studied by Limited Area Models (LAMs). LAMs are used for regional climate studies and operational weather forecast of several hours to 3 days in future. The Eta model developed by the National Center for Environmental Prediction (NCEP), the Fifth-Generation NCAR/Penn State Mesoscale Model (MM5) and Regional Climate Model (RegCM) have been used for weather prediction as well as for the study of present-day climate and variability over different parts of the world. Regional Climate Model (RegCM3) has been widely . used for various mesoscale studies. However, it has not been tested to study the characteristics of circulation features and associated rainfall over India so far. In the present study, Regional Climate Model (RegCM-3) has been integrated from 1 st April to 30th September for the years 1993-1996 and monthly mean monsoon circulation features and rainfall simulated by the model at 55km resolution have been studied for the Indian summer monsoon season. Characteristics of wind at 850hPa and 200hPa, temperature at 500hPa, surface pressure and rainfall simulated by the model have been examined for two convective schemes such as Kuo and Grell with Arakawa-Schubert as the closure scheme, Model simulated monsoon circulation features have been compared with those of NCEP/NCAR reanalyzed fields and the rainfall with those of India Meteorological Department (IMD) observational rainfall datasets, Comparisons of wind and temperature fields show that Grell scheme is closer to the NCEP/NCAR reanalysis, The influence of Tibetan snowdepth in spring season on the summer monsoon circulation features and subsequent rainfall over India have been examined. For such sensitivity experiment, NIMBUS-7 SMMR snowdepth data have been used as a boundary condition in the RegCM3, Model simulation indicates that ISMR is reduced by 30% when 10cm of snow has been introduced over Tibetan region in the month of previous April. The existence of Tibetan snow in RegCM3 also indicates weak lower level monsoon westerlies and upper level easterlies.
고상 반응법을 통해 $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ 페롭스카이트계 산소투과 분리막을 제조하였으며, 미세구조에 따른 산소투과 특성 및 기계적 특성을 고찰하였다. 분리막의 미세구조는 소결온도 및 소결 유지시간을 달리함으로써 조절하였으며, 미세구조에 따른 평균 입경 및 상대밀도의 변화를 평가하였다. 입계 분율의 감소에 따라 산소투과유속이 증가하는 경향을 나타내었으며, 본 연구에서 고찰한 소결조건 중에서는 1300${\circ}C$에서 10시간 유지하여 제조한, 상대밀도가 높고 비교적 입경이 조대한 분리막 시편의 경우, 최대 0.37 ml/$cm^2$${\cdot}$min의 산소투과유속이 특정되었다. 파괴강도는 소결체의 상대밀도에 의존적이었으며, 파괴인성은 결정립의 크기에 따라 증가하는 경향을 나타내었다.
본 연구에서는 차수가 요구되는 해안제방 축조공사 중 해수유입 발생에 대한 원인과 보강사례를 분석하였다. 전기 비저항탐사를 실시한 결과 대체적으로 해저면 원지반과 제체가 명확히 구분되었으나, 상당 부분에서 저 비저항 이상대가 분포함이 확인되었다. 그로부터 누수의 원인은 체절과정에서 강도가 부족한 원지반의 3차원적 전단변형 거동과 그로 인한 불규칙한 강제치환, 그리고 조류와 유속에 의한 차수시트 시공 상 품질확보 문제 등으로 판단된다. 빠른 유속 및 해수조건에서의 시공성과 내구성, 유사한 시공사례, 경제성 등을 종합적으로 고려하여 저유동성 몰탈, 슬러리 및 약액주입공법의 조합을 최적의 보강공법으로 선정하고 확인시추 및 시험시공을 통하여 배합비와 보강패턴을 결정하였다. 일반 및 집중 누수구간으로 구분하여 각 패턴에 따라 시공하고 보강효과를 확인하였다. 보강된 지반의 현장투수시험, 추적자시험, 코아채취 및 일축압축강도 측정 등을 통하여 보강효과를 확인한 결과 모든 시험에서 설정된 기준치를 만족하는 것으로 나타났다. 결론적으로 조위차가 큰 서해안 지역에서 차수가 요구되는 제방시공에 있어서는 특히 체절공사 시 빠른 유속과 그로 인한 조류력이 차수재 품질확보를 저해하는 요인일 뿐 아니라 해저면 연약층의 3차원적 전단변형 거동으로 강제치환 범위와 차수재 포설길이를 예측하는데 상당한 어려움이 있으므로 설계 및 시공 시 이에 대한 고려가 필요할 것으로 판단된다.
Music videos provide for many others images, alluring the audience to fall in another emotional world, while the sexual images shown in them suggest new images of man and woman. Today, men's images are being interpreted from various viewpoints. As interests in men's fashion are visualized through music video clothing, not only juveniles who want to be identified with the music video images but also adults try to imitate them, and proceed to wear the clothing, obliterating the boundary between 'reality' and 'illusion' and creating new images of men. This study is aimed at reviewing the male images shown in the music videos, particular their clothing, produced between 2000 and 2002. The results of this study could be summarized as follows : 1. Since beginning of the human history, men's image has been characterized by patriarchal system, capitalism, bourgeois class which emerged after industrial revolution and other man-dominant socio-cultural phenomena, such male image are shown in the music video as conservative and dominant image. 2. However, due to the post-modern culture, the power began to be decentralized. while feminism and men's liberation movement gain strength. As a result, women or heterosexuals began to regard men as sexual objects, and such a phenomenon is featured as sexual, bisexual or decadent images in the music videos. 3. On the threshold of the 21st century, music videos have begun to creatively describe men's life, their social conflicts, dreams and hopes and death and thereby. feature men's such images as being destroyed in view of existentialism. The numerous creative men's images interpreted in this way are featured in many music video works only to create playful, cyborg or demonic images using the senses. After all, men's images are featured in the music video costumes in diverse ways ranging from the conventional images to acquiescent images. In addition, various male images are combined with the characteristics of the music videos to be re-created anew. The young men in the our modern age tend to imitate or apply such images to create their own images or individualistic styles. All in all, men's image can be fixed no longer but diversified and fragmented in the new age.
저압터빈 최종 단 블레이드는 응축 증기 내 농축된 불순물에 의해 조성되는 부식환경 하에서, 고속회전에 따른 높은 응력이 부가되어 응력부식 균열에 의한 파손이 빈번히 발생된다. 이러한 가혹 환경 하에서 블레이드의 안정적 사용을 위해서 내식성과 고 강도 특성 등을 갖춘 12% Cr 마르텐사이트계 스테인레스 강을 널리 적용한다. 본 논문은 마르텐사이트계 스테인레스 강으로 제작된 최종 단 블레이드가 정상운전 중 갑작스럽게 파손되어, 원인진단을 위해 파손 및 건전 블레이드를 대상으로 기계적 물성, 파단면 및 미세 조직 검사를 수행한 결과를 기술한 내용이다. 파손된 블레이드의 기계적 물성 시험결과 재질 사양서 기준에 비해 충격치는 낮고 경도는 높은 전형적인 재질 취성화 특성이 확인되었다. 또한, 파단면 검사결과 가지(branch)형태의 균열이 입계를 따라 진전하였고, 표면에서 Cl, S 등의 부식성분이 검출되었다. 이상의 결과들을 토대로 블레이드의 파손원인은 응력부식 균열임을 알 수 있었다.
난수성 eddy의 운동에 있어서 경계면 마찰과 해저지형의 중요성을 연구하기 위하여 비선형 QG-모델이 사용되었다. 수직구조를 나타내는 유선함수의 경험적 직교함수는 순압과 제 1 경압 역학 함수를 표현한다. 이 모델은 10 km ${\times}$ 10 km의 격자간격을 지닌 1000 km ${\times}$ 1000 km으로 구성되어 있고 360일동안 시험하였다. 대한해협을 통한 유입량은 쓰가루해협을 통하여 빠져 나간다. 울릉분지내(평평한 해저지형)에서는 QG방정식의 비선형 이류항과 ${\beta}$-효과사이에 균형이 난수성 eddy를 북쪽으로 이동하게 한다. 대륙사면위에서의 난수성 eddy는 비선형항이 중요하게 작용하지만, 평평한 지형에서는 보조적인 역활을 한다. 해저지형이 변화하는 해역에서 난수성 eddy의 비선형항은 시간의 함수이다. 강한 eddy는 북쪽으로 이동한다. Eddy의 세기가 약해지면, 비선형항과 지형적인 베타효과항이 균형을 이루게 된다. Eddy의 분산과 함께 비선형성이 감소하므로서, 지형적 Rossby파 개념에 의하여 난수성 eddy는 대륙사면을 따라서 남하한다. 수치실험은 난수성 eddy의 운동에 미치는 경계면 마찰의 중요성을 확인하였다. 난수성 eddy의 북쪽 침투거리는 경계면 마찰계수의 감소로 증가하게 된다 아울러 Reynolds number의 감소로 북쪽이동을 방지할 수 있다. 또한 이 난수성 eddy운동과정에 있어서 해저지형이 중요한 역할을 하는 것이 제시되었다.
Characterization of microstructures and mechanical properties of 83mm thickness EH36-TM welds produced by the combined flux cored arc (FCA) and electro gas (EG) welding processes has been studied with the two different groove conditions, single-V (SV) and double-V (DV) bevels. The welding consumables used for FCA and EG welding processes were ASME/AWS A5.29 (E81T1-K2) and A5.26 (EG72T), respectively. Experimental results showed that all the mechanical properties of welds such as tensile property, CVN toughness and Vickers hardness met IACS requirements. The tensile strength of EG welded plates were reduced by approximately 4% (DV: 3.8%, SV: 4.2%) compared to the base metal. The hardness value of SV-beveled weld metal was slightly lower than that of DV-beveled one. There were no significant differences as per welding groove conditions except for the weld metal. In addition, at the fusion line, the toughness of SV condition was 20J lower and the weld metal was 40J lower than DV condition, respectively. On the basis of microstructural analysis, grain boundary ferrite (GBF) structures for SV condition were 2 times higher volume fraction than for DV condition and their packet sizes were coarsened to almost double. It was thus suggested that the GBF volume fractions and packet sizes in the weld metal of EH36-TM steel plates are the most important factors affecting the mechanical properties of the combined FCA and EG welded joint. Nevertheless, all the results of welds with both DV and SV conditions were found to be excellent.
Hastelloy X in this study was applied in jet engine F-15 air fighter as shroud to isolate the engine from outer skin. After 15 years operation at elevated temperature the mechanical properties decreased gradually due to the precipitation of continues second phases in the grain boundaries and precipitated inside the grain. The crack happened at the edge of the shroud due to the thermal and mechanical stress from jet engine. Selective TEM analysis found that the grain boundaries consist of $M_{23}C_6$ carbide, $M_6$ Ccarbide and small percentage of sigma(${\sigma}$) phase. Furthermore, it was confirmed the nano size of ${\sigma}$ and miu (${\mu}$) phase inside the grain. In this study, it was investigated the microstructure of the degraded shroud component and HAZ of repair welded shroud. In the HAZ, it was observed the dissolution of the $M_{23}C_6$ carbides and smaller precipitates, the migration of the undissolved larger $M_{23}C_6$ carbide and $M_6$ Ccarbide. It is also observed the liquation due to the simply melt of the segregated precipitates in the grain boundaries. Interestingly, the segregated second phases which simply melt in the grain boundaries more easily happened at higher heat input welding condition. High temperature tensile test was done at $300^{\circ}C$, $700^{\circ}C$ and $900^{\circ}C$. It was obtained that the toughness of welded sample is lower compare to the non-welded sample. The solution heat treatment at $1170^{\circ}C$ for 5 minutes was suggested to obtain a better mechanical properties of the shroud. The high cycle fatigue number of the repair welded shroud shows a much lower compare to the shroud. In addition, the high cycle fatigue number at room temperature after solution heat treatment was almost double compare to the before solution heat treatment under 420-500MPa stress amplitude. However, the high cycle fatigue number of repaired welded sample was shown a much lower compare to the non- welded shroud and solution treated shroud. One of the main reasons to decrease the tensile strength and the high cycle fatigue properties of the repair welded shroud is the formation of the liquid phase in HAZ.
스트럿-타이 모델 방법은 응력교란영역을 갖는 콘크리트 구조부재의 설계에 효과적인 방법으로 알려져 있으며, 세계 주요 설계기준서에 채택되고 있다. 그러나 스트럿-타이 모델 방법에 의한 콘크리트 구조부재의 설계과정은 스트럿-타이 모델의 형성, 스트럿 및 타이의 필요단면적의 결정, 스트럿 및 절점영역의 강도검토 등으로 인한 반복적인 수치해석과정, 많은 도식적 계산과정, 엄청난 시간과 노력, 그리고 여러 단계에서의 설계자의 주관적인 판단 등을 필요로 하는 단점을 내포하고 있다. 이 연구에서는 스트럿-타이 모델 설계과정 상의 단점을 극복하여 모든 콘크리트 구조부재의 스트럿-타이 모델 해석 및 설계를 전문적이며 효과적으로 수행할 수 있는 컴퓨터 그래픽 프로그램을 개발하였다. 이 연구의 컴퓨터 그래픽 프로그램은 평면고체 및 평면트러스의 선형 및 재료비선형 해석을 위한 모든 종류의 경계조건을 소화할 수 있는 유한요소해석 프로그램, 스트럿 및 절점영역 유효강도의 자동적 결정을 위한 수치해석 프로그램, 다양한 형태의 스트럿 및 절점영역의 형상 결정을 위한 그래픽 프로그램 등을 포함한 콘크리트 구조부재의 스트럿-타이 모델 해석 또는 설계과정 상에 필요한 모든 프로그램을 탑재하고 있다. 이 연구의 프로그램은 그래픽 환경을 접목시킨 여러 다양한 기능을 통해 콘크리트 구조부재의 모델링 및 스트럿-타이 모델 해석 및 설계 시 뛰어난 효율성과 편의성을 제공할 것이다.
왕복동식 압축기에서 피스톤과 커넥팅로드는 중요한 부분이다. 이러한 주요부에 기계적 부하가 과도하게 가해지면 해당 기부속이 손상될 수 있으며, 교체하기도 쉽지 않고 비용도 많이 든다. 따라서 내구성과 수명에 영향을 미치는 요인을 분석할 필요가 있다. 본 연구의 주요 목적은 피스톤과 커넥팅로드의 최대 응력 집중 위치를 확인하는 것이다. 이를 위해 설계된 공기압축기의 작업 공정의 동적계산을 기반으로 피스톤 및 커넥팅로드의 응력 분석을 수행하였다. 공기압축기의 피스톤과 커넥팅로드의 3 차원 모델을 따로 설계하고, 이러한 부품들의 유한요소 해석은 수치해석적인 근사해법을 사용하였다. 피스톤은 열 경계 조건 없이 크랭크 샤프트의 각도에 따라 압력 부하를 받는다. 시뮬레이션 결과는 피스톤과 커넥팅로드의 응력 집중 위치와 그 값을 예측하고 추정할 수 있다. 그 결과 크랭크 각도 $135^{\circ}$와 $225^{\circ}$에서 피스톤은 190MPa, 커넥팅로드는 123MPa 이상의 최대 등가응력이 나타났으며 이는 인장 항복강도 이하의 값이다. 또한, 커넥팅로드와 피스톤에 계산 된 안전 계수는 1보다 높게 나타났다. 더욱이, 이러한 결과는 왕복동 공기압축기 제작사에 피스톤 및 커넥팅로드를 설계함에 있어서 최적화를 위한 참고 자료로 활용 될 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.