• Wind and Structures
• /
• 제8권6호
• /
• pp.455-467
• /
• 2005

The effects of upstream velocity profiles on the flow around a low-rise rectangular prism submerged in a turbulent boundary layer have been investigated. Three different boundary layer profiles are generated, which are characterized by boundary layer height, displacement thickness, and momentum thickness. Flow characteristics variations caused by the different layers such as those in turbulent kinetic energy distribution and locations of re-circulating cavities and reattachment points have been precisely measured by using a PIV (Particle Image Velocimetry) technique. Observations were made in a boundary layer wind tunnel at $Re_H$=7900, based on a model height of 40 mm and a free stream velocity of 3 m/s with 15 - 20% turbulence intensity.

• International Journal of CAD/CAM
• /
• 제8권1호
• /
• pp.11-20
• /
• 2009

The conventional methods of boundary-conformed 2D surfaces generation usually yield some problems. This paper deals with two boundary-conformed 2D surface generation methods, one conventional approach, the linear Coons method, and a new method, boundary-conformed interpolation. In this new method, unidirectional 2D surface has been generated using some of the geometric properties of the given boundary curves. A method of simultaneous displacement of the interpolated curves from the opposite boundaries has been adopted. The geometric properties considered for displacements include weighted combination of angle bisector and linear displacement vectors at all the data-points of the two opposite generating curves. The algorithm has one adjustable parameter that controls the characteristics of transformation of one set of curves from its parents. This unidirectional process has been extended to bi-directional parameterization by superimposing two sets of unidirectional curves generated from both boundary pairs. Case studies show that this algorithm gives reasonably smooth transformation of the boundaries. This algorithm is more robust than the linear Coons method and capable of resolving the 2D boundary-conformed parameterization problems.

• Structural Engineering and Mechanics
• /
• 제86권3호
• /
• pp.361-371
• /
• 2023

Boundary condition is an important factor affecting the vibration characteristics of structures, under different boundary conditions, structures will exhibit different vibration behaviors. On the basis of the previous work, this paper extends to the nonlinear resonance behavior of axially moving graphene platelets reinforced metal foams (GPLRMF) plates with geometric imperfection under different boundary conditions. Based on nonlinear Kirchhoff plate theory, the motion equations are derived. Considering three boundary conditions, including four edges simply supported (SSSS), four edges clamped (CCCC), clamped-clamped-simply-simply (CCSS), the nonlinear ordinary differential equation system is obtained by Galerkin method, and then the equation system is solved to obtain the nonlinear ordinary differential control equation which only including transverse displacement. Subsequently, the resonance response of GPLRMF plates is obtained by perturbation method. Finally, the effects of different boundary conditions, material properties (including the GPLs patterns, foams distribution, porosity coefficient and GPLs weight fraction), geometric imperfection, and axial velocity on the resonance of GPLRMF plates are investigated.

• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1742-1756
• /
• 1997

The acoustic characteristics of a direct radiator type loudspeaker has been studied in this paper. The natural modes of the speaker cone vibration analyzed numerically by the finite element method have been verified by comparing them with experimental results. The so-ap-proved finite-element model has been used to calculate the vibration response of the cone excited by the voice coil. The vibration displacement of the speaker cone paper has been converted into the vibration velocity and used as a boundary condition for the acoustic analysis. The frequency characteristics, directivity, and sound pressure distribution of the loudspeaker have been calculated by the boundary element method. The numerical results have been verified by the experiments carried out in an anechoic chamber. The variations of the acoustic characteristics due to the changes of some design parameter values can be examined using the numerical model.

• 한국환경복원기술학회지
• /
• 제4권3호
• /
• pp.49-54
• /
• 2001

It is common that the soil layer is a few meters below the earth's surface and the rock mass is below the soil layer in the view of geological characteristics in Korea. And the boundary between rock and soil is clearly divided. When dealing with the stability of rock masses, as in the case of rock slopes or dam foundations, the majority of the collapses is not within the soil layer, but within the soil-rock boundary. Therefore it is important to identify the shear strength characteristics between soil-rock boundary. And then in the method of reinforcement on landslide this chose a cut slope near Daemo elementary school in Seoul, surveyed shear strength between soil-rock contacts and considered a large scale collapse using a limit equilibrium method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.326-331
• /
• 2007

Large-scale molecular dynamics simulations are performed to verify the deformation characteristics of grain boundaries in nanolithography process. The copper substrate made of 200,000 atoms is constructed by two grains in different crystal orientations using dynamic relaxation method. The grain boundary is located in the middle of the substrate with $45\sim135$ degree angles. The plowing tip is made of diamond-like-carbon atoms in a variety of shapes. In the simulations, the generation, propagation, and accumulation of dislocations are observed inside the substrate. From the numerical results, we address the dynamic behavior of the grain boundaries as well as the frictional characteristics in terms of the morphology of initial grain boundaries.

• 전력전자학회논문지
• /
• 제13권4호
• /
• pp.257-262
• /
• 2008

본 논문에서는 임계 인덕터 전류모드로 동작하는 다상 교호 승압컨버터의 평균 상태방정식을 유도하고, 정상상태 해석 및 소 신호 제어특성을 고찰한다. 또한, 유도된 수식 이론을 근거로, 800W급 2상 교호 승압컨버터를 제작하고, 60인치용 PDP 파워모듈의 PFC 블록에 적용함으로서, 제안된 방식의 실효성을 검증한다.

• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1303-1313
• /
• 2002

Effects of the reduced frequency of upstream wake on downstream unsteady boundary layer flow were simulated by using a Wavier-Stokes code. The Wavier-Stokes code is based on an unstructured finite volume method and uses a low Reynolds number turbulence model to close the momentum equations. The geometry used in this paper is the MIT flapping foil experimental set-up and the reduced frequency of the upstream wake is varied in the range of 0.91 to 10.86 to study its effect on the unsteady boundary layer flow. Numerical solutions show that they can be divided into two categories. One is so called the low frequency solution, and behaves quite similar to a Stokes layer. Its characteristics is found to be quite similar to those due to either a temporal or spatial wave. The low frequency solutions are observed clearly when the reduced frequency is smaller than 3.26. The other one is the high frequency solution. It is observed for the reduced frequency larger than 7.24. It shows a sudden shift of the phase angle of the unsteady velocity around the edge of the boundary layer. The shift of phase angle is about 180 degree, and leads to separation of the boundary layer flow from corresponding outer flow. The high frequency solution shows the characteristics of a temporal wave whose wave length is half of the upstream frequency. This characteristics of the high frequency solution is found to be caused by the strong interaction between unsteady vortices. This strong interaction also leads to destroy of the upstream wake strips inside the viscous sublayer as well as the buffer layer.

• 한국항공우주학회지
• /
• 제42권12호
• /
• pp.1028-1036
• /
• 2014

연구에서는 MOC 및 CFD를 이용한 극초음속 노즐 설계 절차를 수립하였다. MOC를 이용하여 설계된 비점성 노즐 형상에 대하여, 점성 유체 전산 해석을 통하여 경계층 두께를 산출하여 노즐 형상을 보정하였다. 여러 가지의 경계층 두께 정의를 비교한 결과, 노즐 단면 최대 속력의 95% 속력을 가지는 경계층 두께의 정의가 설계 마하수를 가장 잘 만족하는 것으로 여겨진다. 노즐 설계과정은 MOC 설계에 대한 격자 형성, 비점성 해석 및 점성 해석, 경계층 보정 및 점성 해석에 의한 확인 및 결과 도출의 순서로 진행되며, 모든 과정은 자동 일괄 처리토록 작성되었다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제26권2호
• /
• pp.43-62
• /
• 2017

Purpose This study provided empirical support for the model that explain the formation of privacy concerns in the perspective of Information Boundary Theory. This study investigated an integrated model suggesting that privacy concerns are formed by the individual's disposition to value privacy, privacy awareness, awareness of privacy policy, and government legislation. The Information Boundary Theory suggests that the boundaries of information space dependends on the individual's personal characteristics and environmental factors of e-commerce. When receiving a request for personal information from e-commerce websites, an individual assesses the risk depending on the risk-control assessment, the perception of intrusion give rise to privacy concerns. Design/methodology/approach This study empirically tested the hypotheses with the data collected in a survey that included the items measuring the constructs in the model. The survey was aimed at university students. and a causal modeling statistical technique(PLS) is used for data analysis in this research. Findings The results of the survey indicated significant relationships among environmental factors of e-commerce websites, individual's personal privacy characteristics and privacy concerns. Both individual's awareness of institutional privacy assurance on e-commerce and the privacy characteristics affect the risk-control assessment towards information disclosure, which becomes an essential components of privacy concerns.