• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.5
• /
• pp.527-536
• /
• 2010

Although the bubble-floc agglomerate floated and formed the float layer on the surface of the water in the DAF process, after inducing in the thickening tank a part of the bubble-floc agglomerate come up again to the surface and the other is settled at the bottom of the tank. The bubble-floc agglomerate divided into two group as the scum on the surface and the sludge of the bottom gives rise to operational troubles for the thickening process. In order to find out the cause of break-up and the effective thickening method for sludge from the DAF process, the composition of the bubble-floc agglomerate was investigated and a series of flotation experiments carried out. There was no difference of composition between the scum on the surface and the sludge of the bottom in the thickening tank. The coagulation was not effective to improve the trouble that the bubble-floc agglomerate divided into the scum and the sludge. It was estimated that for the bubble-floc agglomerate of thickening tank the trouble was caused by not the change or the difference of chemical composition but whether the bubble-floc agglomerate hold bubbles. Furthermore, for the effective thickening of sludge from the DAF process, it is required an additional flotation applied the AS ratio depending upon the solid concentration of sludge as the operation parameter.

• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.74-83
• /
• 2017

Coal-fired power plants supply roughly 50 percent of the nation's electricity but produce a disproportionate share of electric utility-related air pollution. Coal combustion technology can facilitate volume reduction of up to 90%, with the inorganic contaminants being captured in furnace bottom ash and fly ash residues. These disposal coal ash residues are however governed by the potential release of constituent contaminants into the environment. Accelerated carbonation process has been shown to have a potential for improving the chemical stability and leaching behavior of bottom ash residues. The aim of this work was to quantify the volume of $CO_2$ that could be sequestrated with a view to reducing greenhouse gas emissions and stabilize the contaminated heavy metals from bottom ash samples. In this study, we used PC boiler bottom ash, Kanvera reactor (KR) slag and calcined waste lime for measuring chemical analysis and heavy metals leaching tests were performed and also the formation of calcite resulting from accelerated carbonation process was investigated by thermo gravimetric and differential thermal analysis (TG/DTA).

• Journal of Korean Society of Water and Wastewater
• /
• v.13 no.1
• /
• pp.51-60
• /
• 1999

An intermittently-aerated, intermittently-decanted single-reactor process (KIDEA process : KIST intermittently decanted extended aeration process) was applied for nitrogen removal from wastewater. Synthetic wastewater with chemical oxygen demand (COD): nitrogen (N) ratio of approximately 5.25: 1 was used. The average COD removal efficiency reached above 95%, and under optimal conditions nitrogen removal efficiency also reached above 90%. This process consisted of 72 minute aeration, 48 minute settling and 24 minute effluent decanting with continuous feeding of influent wastewater from the bottom of the reactor, and did not require a separate anoxic mixing-phase. In this process, nitritation ($1^{st}$ step of nitrification) was induced but nitratation($2^{nd}$ step of nitrification) was suppressed. Main factors responsible for the accumulation of nitrite ion in the experimental condition were free ammonium and dissolved oxygen. This condition of nitrite build-up accelerated by continuous feed flow in the bottom of the KIDEA reactor because of high concentration of ammonia nitrogen in the influent. This research provides one of answers to control nitrate build-up.

• International Journal of Knowledge Content Development & Technology
• /
• v.4 no.1
• /
• pp.39-51
• /
• 2014

The paper proposes that the Basic Concepts Classification (BCC) could serve as the controlled vocabulary for the Semantic Web. The BCC uses a synthetic approach among classes of things, relators, and properties. These are precisely the sort of concepts required by RDF triples. The BCC also addresses some of the syntactic needs of the Semantic Web. Others could be added to the BCC in a bottom-up process that carefully evaluates the costs, benefits, and best format for each rule considered.

• Journal of Powder Materials
• /
• v.13 no.6 s.59
• /
• pp.415-420
• /
• 2006

Nanostructured metallic materials are synthesized by bottom-up processing which starts with powders for assembling bulk materials or top-down processing starting with a bulk solid. A representative bottom-up and top-down paths for bulk nanostructured/ultrafine grained metallic materials are powder consolidation and severe plastic deformation (SPD) methods, respectively. In this study, the bottom-up powder and top-down SPD approaches were combined in order to achieve both full density and grain refinement without grain growth, which were considered as a bottle neck of the bottom-up method using conventional powder metallurgy of compaction and sintering. For the powder consolidation, equal channel angular pressing (ECAP), one of the most promising method in SPD, was used. The ECAP processing associated with stress developments was investigated. ECAP for powder consolidation were numerically analyzed using the finite element method (FEM) in conjunction with pressure and shear stress.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.2
• /
• pp.266-277
• /
• 2019

In modern warfare, securing time for preemptive response is recognized as an important factor of victory. The naval combat system, the core of naval forces, also strives to increase the effectiveness of engagement by improving its real-time information processing capabilities. As part of that, it is considered to use the TPR-tree in the naval combat system's target indexing because spatio-temporal searches can be performed quickly even as the number of target information increases. However, because the TPR-tree is slow to process updates, there is a limitation to handling frequent updates. In this paper, we present a method for improving the update performance of TPR-tree by applying the bottom-up update scheme, previously proposed for R-tree, to the TPR-tree. In particular, we analyze the causes of overlaps occurring when applying the bottom-up updates and propose ways to limit the MBR expansion to solve it. Our experimental results show that the proposed technique improves the update performance of TPR-tree from 3.5 times to 12 times while maintaining search performance.

• Korean Journal of Cognitive Science
• /
• v.6 no.3
• /
• pp.41-63
• /
• 1995

We present a LR,bottom-up parsing algorithms for TAG. We will introduce the adjoining rules system to handle the formal properties of TAG and to describe the parsing process more effectively. We will consider the context-free behavior of TAG at the adjoining instant. Then we will present the LR bottom up parsing algorithm for TAG by using this property. The basic idea behind a LR bottom up parsing algorithm can be applied to parsing TAG with other conventional algorithms.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.117-123
• /
• 2014

Cu through-vias, which can be used as thermal vias or vertical interconnects, were formed using bottom-up electrodeposition filling as well as top-down electrodeposition filling into open via-holes and their microstructures were observed. Solid Cu through-vias without voids could be successfully formed by bottom-up filling as well as top-down filling with direct-current electrodeposition. While chemical-mechanical polishing (CMP) to remove the overplated Cu layer was needed on both top and bottom surfaces of the specimen processed by top-down filling method, the bottomup process has an advantage that such CMP was necessary only on the top surface of the sample.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.4
• /
• pp.239-247
• /
• 2006

This paper is to propose new features and models for process innovation after classifying in three categories ; conventional six sigma, lean six sigma and 3rd generation six sigma. First considering two project types which are bottom-up and tod-down, DMAIC process is linked up with QC story 15 steps. Secondly, I present Koreanized lean six sigma model using Japanese production technology and principles. Lastly, this paper also depicts a new 3rd generation six sigma model utilizing MBNQA management quality system.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2536-2539
• /
• 2008

A study has been made on how to occur inertial oscillations in a rotating flow. The flow is considered to be induced by differentially-rotating top and bottom disks with infinite radius. The top and bottom disks are assumed to be set in motion over a finite initial start-up time duration from initial solid body rotation ($\Omega$) to each finial state, i.e., the top disk is rotating at the angular velocity (${\Omega}+{\Delta}{\Omega}$) and the bottom disk (${\Omega}-{\Delta}{\Omega}$). The system Reynolds number, which is a reciprocal of conventional Ekman number in rotating flows, is very high so that a boundary layer flow near disks is pronounced. From a strict theoretical analysis, it is clearly found the fact that inertial oscillation in a rotating flow is caused by excessive input of torque during start-up phase. Above finding comes from the following physics of theoretical result: in the case of abrupt start-up within very shorter time-duration than spin-up time scale, the inertial oscillation is magnified but it could be completely depressed in the case of mildly accelerated start-up, i.e., start-up process being established over diffusion time scale.