• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.1
• /
• pp.15-22
• /
• 1995

To study ecological properties of Vibrio cholerae non-Ol and Vibrio mimicus which have been described as new food poisoning bacteria recently, the influence of factors such as temperature, salinity, pH and chemical oxygen demand (COD) on detection rate and density of these bacteria were evaluated. Fifty four seawater samples and 49 bottom deposit samples from estuary of Kum river from March 26th, 1993 to February 22nd, 1994 were used for this study. The detection rate of V cholerae non-O1 were $16.7\%$ for seawater and $10.2\%$ for bottom deposit, respertively. The total detertion rate of V. cholerae non-O1 $(11.7\%)$ was a little higher than V mimicus $(10.7\%)$. Both V choierae non-O1 and V. mimicus were mainly detected in estuary water of which showed temperature $24^{\circ}C$ above and salinity $10\%o$ below. These bacteria were also detected in bottom deposit on January when the water temperature was $3.5^{\circ}C$. From these results, we supposed that temperature, salinity and organic material were important factors to growth of V. cholerae non-O1 and V. mimicus. V cholerae non-O1 might be grown better than V. mimicus under the fluctuating aquatic environmental condition such as salinity.

• Ocean Science Journal
• /
• v.41 no.1
• /
• pp.11-29
• /
• 2006

We investigated species composition and spatial distribution of the euphausiid community in the Yellow Sea and identified the relationship with environmental factors (temperature, salinity, chlorophyll $\alpha$, nitrate, phosphate, and silicate) using bimonthly data from June, 1997 to April, 1998. The environment varied during the sampling period. In warm seasons, thermocline was well developed rendering lower temperature and higher salinity and nutrient concentrations in the bottom layer. During cold seasons the water column was well mixed and no such vertical stratification was noted. Horizontal distribution of temperature, however, differed slightly between near-coast and offshore areas because of the shallow depth of the Yellow Sea, and between southern and northern areas because of the intrusion of water masses such as Yellow Sea Warm Current and Changjiang River Diluted Water. Four euphausiid species were identified: Euphausia pacifica, E. sanzoi, Pseudeuphausia sp. and Stylocheron affine. E. sanzoi and S. affine were collected, just one juvenile each, from the southern area in June and December, respectively. Pseudeuphausia sp. were collected in the eastern area all the year round except June. E. pacifica occurred at the whole study area and were the predominant species, representing at least 97.6% of the euphausiid abundance. Further, the distribution pattern of the species was varied in regards to developmental stages (adult, furcilia, calyptopis, egg). From spring to fall, E. pacifica adults were abundant in the central area where the Yellow Sea Bottom Cold Water prevailed. Furcilia and calyptopis extended their distribution into nearly all the study area during the same period. From late fall to winter, adults were found at the near-coastal are a with similar pattern for furcilia and calyptopis. The distribution pattern of E. pacifica was consistent regarding temperature, salinity, and three nutrients during the sampling period, whereas chlorophyll $\alpha$ showed a different pattern according to the developmental stages. The nutrients should indirectly affect via chlorophyll $\alpha$ and phytoplankton concentration. With respect to these results, we presented a scenario about how the environmental factors along with the water current affect the distribution of E. pacifica in the Yellow Sea.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.1
• /
• pp.58-63
• /
• 2010

The glass-ceramics made from the mixture of coal bottom ash, produced from a thermal power plant mixed with $Na_2O$ and $Li_2O$ was fabricated and their crystallization behavior was studied using a non-isothermal analyzing method. The temperature for 50% crystallization was higher than the exothermic peak temperature $T_p$ at DTA curve and the quickest crystallization temperature was much the same as $T_p$ as identified from the relationships of crystallized fraction and crystallization rate with temperature. By using Kissinger equation describing a crystallization behavior, the activation energy (262 kJ/mol), the Avrami constant (1.7) and the frequency ($5.7{\times}10^{16}/s$) for crystallization were calculated from which the nepheline crystal could be expected as showing an 1~2-dimensional surface crystallization behavior mainly with some bulk crystallization tendency at the same time. The actual observation of microstructure using SEM showed the considerable amount of surface crystals of dendrite and the bulk crystals with low fraction, so the prediction by the Kissinger equation was in accord with the crystallization behavior of glass-ceramics fabricated in this study.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.471-476
• /
• 2001

The characteristics of conjugated heat transfer in the inclined channel was experimentally investigated. The simulated module is attached to the bottom of the inclined channel and is heated with constant heat flux. The experimental parameters of this study are input power (Q = 3, 7W), inlet air velocity ($V_{i}=0.1{\sim}0.9m/s$) and inclined channel angle (${\varphi}=0{\sim}90^{\circ}$). The results show that input power was most effective parameter on the temperature differences between module and air. As the inclined channel angle increases, the temperatures of the module are increased. And we obtained the best condition on the conductive board when ${\varphi}=0^{\circ}$.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.357-362
• /
• 1996

LOFT LBLOCA test, LP-02-6 was analyzed using RELAP5/MOD3.2. It has a distinguished thermal-hydraulic phenomenon of a positive bottom-up core flow in tile blowdown phase. A modified nodalization which is based on that used in LP-LB-1 calculation by Lubbesmeyer was used in the calculation. RELAP5/MOD3.2 predicted overall system hydraulic behavior relatively well. However, the bottom-up quenching in the middle part of the core was not predicted sufficiently. It was demonstrated also that the peak cladding temperature can be predicted well by adjusting a discharge coefficient. But more improvements are needed in order to apply this code to actual plants with less user dependency.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.142-148
• /
• 2017

The objective of this study is to investigate the cooling characteristics of a heat sink for an LED headlight used in passenger cars. To this end, this study conducts the experimental and numerical analysis of the heat sink heated at constant heat fluxes without air flow applied. In the experiments, heat was transferred at a constant heat flux through the bottom of a heat sink. The measured temperature on pre-selected locations of the heat sink was in good agreement with the numerically predicted one. The experimental and numerical results indicate that the convective heat transfer coefficient for the natural convection mode was decreased by increasing the heat flux applied to the bottom of heat sink, lowering the cooling capabilities.

• Journal of the korean society of oceanography
• /
• v.39 no.1
• /
• pp.14-19
• /
• 2004

Difference of Dissolved Inorganic Phosphorus (DIP), Dissolved Inorganic Nitrogen (DIN) and Dissolved Silicate (DSi) budgets in the Bohai Sea between 1982 and 1992 related the decrease of the Yellow River discharge is discussed on the basis of observed data. The estuarine circulation in the Bohai Sea had been weakened from 1982 to 1992 due to the decrease of the Yellow River discharge and the average residence time of fresh water had become longer. DIN concentration increased but DIP and DSi concentrations decreased from 1982 to 1992 in the Bohai Sea. Primary production was regulated mainly by water temperature and DIN concentration in 1982 but it was regulated mainly by DIP concentration in 1992. Primary production was larger than decomposition plus bottom release and nitrogen fixation was larger than denitrification in 1982. However, decomposition plus bottom release was larger than primary production and denitrification was larger than nitrogen fixation in 1992 in the Bohai Sea.

• 한국해양학회지
• /
• v.9 no.2
• /
• pp.10-18
• /
• 1974

The cold water mass around the southeast coast of the Korean Peninsula is analyzed by using CSK data from 1966 through 1970. It is shown that this water mass flows down from the region offshore of Jukbyun to the area of Youngil Bay along the 100meter contour line of bottom topography. In ordinary summer conditions when the current velocity in the Korea Strait is usually above about 50cm/sec and the wind direction is southwest, the cold water ascends to the surface and makes the surface temperature gradient large, unless disturbed by a tropical cyclon. The bottom water of the Korea Strait is formed by the stratification after the Tsushima intermediate water and the Japan Sea intermediate water have been mixed. In winter the Tsushima intermediate water with high salinity sinks rapidly around the inlet of the Japan Sea and prevents the Japan Sea intemediate water from entering the Korea Strait.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.119-122
• /
• 2006

In this study, bottom-up type powder processing and top-down type SPD (severe plastic deformation) approaches were combined in order to achieve full density of 1 vol.% carbon nanotube (CNT)-metal matrix composites with superior mechanical properties by improved particle bonding and least grain growth, which were considered as a bottle neck of the bottom-up method using the conventional powder metallurgy of compaction and sintering. ECAP (equal channel angular pressing), the most promising method in SPD, was used for the CNT-Cu powder consolidation. The powder ECAP processing with 1, 2, 4 and 8 route C passes was conducted at room temperature. It was found by mechanical testing of the consolidated 1 vol.% CNT-Cu that high mechanical strength could be achieved effectively as a result of the Cu matrix strengthening and improved particle bonding during ECAP. The ECAP processing of powders is a viable method to achieve fully density CNT-Cu nanocomposites.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.123-126
• /
• 2006

In this study, bottom-up type powder processing and top-down type SPD (severe plastic deformation) approaches were combined in order to achieve full density of carbon nanotube (CNT)/metal matrix composites with superior mechanical properties by improved particle bonding and least grain growth, which were considered as a bottle neck of the bottom-up method using the conventional powder metallurgy of compaction and sintering. ECAP (equal channel angular pressing), the most promising method in SPD, was used for the CNT/Cu powder consolidation. The powder ECAP processing with 1, 2, 4 and 8 route C passes was conducted at room temperature.