• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.31-41
• /
• 2016

This study was conducted to develop a handy earth auger for use in sloppy and rugged forest terrains in order to reduce labor cost which comprises a major part of the production costs in forest afforestation projects. The first prototype is developed consist of two parts, the soil-digging screw and the battery power source. The specifications of the first prototype screw are: length of 170mm, a top diameter of 60mm, bottom diameter of 47mm, 23° angle for each helix, and a 50mm awl-head tip. The use of a single line of screw was selected for reduced weight. In addition, a power source of rotary DC Motor(WD-6G2425, WONILL, Korea) with a maximum torque of 30kgf-cm, rotation of 20-30rpm, K6G30C decelerator with a reduction ratio of 30:1 which could be used with no load for 48 was operated. In consideration of its weight, a lithium battery was utilized in line with the goal of developing a lightweight auger. In order to evaluate the performance of the first prototype, test sites were selected as 6 areas. The rotational force was found to be highest in area A(Solid area), followed by areas F(Mounted slope 40° area) and E(Mounted slope 30° area). It was also observed that in general, the rotational force increased along with the increase in soil depth with the maximum rotational force recorded at 10cm.

• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.453-469
• /
• 2019

The celadon jar with inscription of 'the Fourth Sunhwa Year' is an important chronology that shows the conditions of production of the early celadon due to the inscription on the bottom including its purpose, application, and the producer. This celadon jar has been restored several times in the past. However, concerns over the structural stability, such as the separation and level differences in the joined cracks, have risen because of the aging of the repair materials, which were subjected to various environmental changes over a long time. By examining the conditions of preservation, the major damage was identified as the '入' shaped crack on the front, the 'V' shaped restored part and the crack on its left side, and the 'J' shaped crack on the back side. In the past, the cracks were found to be joined using a refined lacquer containing camphor, drying oil, rosin, etc. mixed with soil powder. The joint line was repainted with the refined lacquer and covered with gold powder. The missing parts were restored with gypsum and colored with acrylic color. After that, the repair materials were aged and emergency treatment was performed at the National Museum of Korea in 1981. At that time, Cemedine C or Cemedine C mixed with microballoons was used for reinforcing the cracks. Conservation treatment focused on removing the past repair materials and reinforcing the physically fragile parts by joining and restoring them based on the examination of the preservation condition. in addition, the area around the restored part was colored for future exhibition.

• Journal of the Korean Geophysical Society
• /
• v.3 no.1
• /
• pp.57-66
• /
• 2000

The location and geometry of the Ulsan Fault play important roles in interpreting tectonic evolution of the southeastern part of the Korean Peninsula. Dipole-dipole electrical resistivity surveys and seismic refraction surveys were carried out in the Yaksoo area, Ulsan in order to measure the thickness of the alluvium covering the Ulsan Fault and to find associated fracture zones and possibly the location of its major fault plane. The collected data were analyzed and interpreted. Some results reported previously by others were also used in this interpretation. No low resistivity anomalies were found in the cross-sectional resistivity image of the survey line located in the east of the Dong River. In contrast, well-developed continuous low resistivity anomalies were detected in the west of the Dong River. This strongly suggests that the major fault plane of the Ulsan Fault is located under or in the west part of the Dong River. Two refraction boundaries corresponding to the underground water level and the bottom of the alluvium were found by refraction surveys carried out on the limited part of the east survey line. The thickness of the alluvium was found to be about 30 m. Small faults in the basement rock identified by reflection surveys were not detected by both resistivity and refraction seismic surveys. This might be explained by assuming that low resistivity anomaly is more closely related to the clay contents than the water contents. On the other hand, it may be resulted by the limited resolution of the resistivity and refraction surveys. Detailed study is required to clarify the reason. Resistivity survey is frequently considered to be a good exploration method to detect subsurface faults. However, it appears to be less useful than reflection seismic survey in this work. In dipole-dipole resistivity survey, the number of separation should be increased to survey deeper subsurface with the same resolution. However, signal to noise ratio decreases as the number of separation increases. In this survey area, the signal to noise ratio of up to sixteen separations was good enough based on the statistical properties of measurements.

• Journal of the Korean Society of Costume
• /
• v.30
• /
• pp.69-84
• /
• 1996

The main current of ancient Korean thought is based on Yuk(易) : which solves the principle of creation of universe letter(文字) which is the principle of geometry and three elements thought of circle square . It's related to the creation principle of the universe and regarded as a sign that demons-trates shows the way to read the mathematical principle. The original form of Korean clothes(Han-Bock, 韓服) is represents the structure of hu-man body which reflects a small universe. So a good structure and meaning of the human body is well read in the formation of Korean clothes(Han-Bock, 韓服) and that is a good symbolization of the clothes(Han-Bock, 韓服) as the space of small universe. The good formation of Korean clothes(Han-Bock, 韓服) could be shown by cutting out straight bending twisting and turning each straitly cutting piece is applied to its trans-tormation. Geametical formation with obvious sym-metric dividing of front-back left-right and top-bottom is well shown in Korean clothes by twisting Yuk(易) or m bius strips. So we can find out whole formation by representing only either 'front and back' or 'left and right' and also sa-pok(사폭) of man's trousers seop(섶) of jeo-go-ri(short jacket 저고리) kyut-ma-gi(곁마기) of Sam-hwai-jang jeo-go-ri (삼회장 저고리), mu(무) of jig-ryung(straight collar and long and wide sleeved robe, 直領) trouser wide and ga-rae-ba-dae(가래바대) of dan-cok-kok(woman's under trousers). The formation line of Korean clothes(Han-Bock, 韓服) is based on theprinciple of unlimited m bius strips by twisting of turning direction from universal principle and original basic form is not changd even by turning in-side out. Unity of the whole and part in Korean clothes(Han-Bock, 韓服) could be found in nonorientable thought(非始原思想) which represents the unity and dependence kil(길) of jeo-go-ri(short jacket, 저고리) and po(long and wide sleeved robe, 袍). Selva-gewise(식서방향) of sleeves and seam of out-side of kil(길) and outside of seop(섶) are directed to outside of seop(섶) inside of seop(섶) is to kil and direction of inseam of kheut-dong(끝동) and kyut-ma-gi(곁마기) is directed to sleeves. Korean clothes(Han-Bock, 韓服) is usually made by cutting fabric for several parts and sewing them and the way to make Korean clothes is deeply related to the theory of chon-pu-kyung jong-il and il-seok -sam-geuk. As the development of men's consciousness is pro-gressed from total separation to separation and superseparation. Sewing process of korean clothes(Han-Bock, 韓服) can be make single dimension to double or triple dimension of korean clothes(Han-Bock, 韓服) silhoutte bacause it can be include principle of topology as noneuclity.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.1
• /
• pp.53-81
• /
• 2017

Targeted killing is a modern euphemism for the assassination of an individual by a state organization or institution outside a judicial procedure or a battlefield. Targeted killing using armed drones has raised profound anxieties in legal, policy, and advocacy communities in the United States and abroad, including among UN officials. The bottom line for targeted killing supporters is that targeted killing works as part of a larger counter-terrorism strategy. Targeted killing does what it is supposed to and removes the leader of a group. And despite growing legal, moral, and ethical issues concerning targeted killing, scholars agree that drone strikes and targeted killing operations will stay. The ACLU has sued top CIA and Pentagon decision-makers to seek accountability for the unlawful killings of three U.S. citizens in Yemen last year. Also, strikes by drones are associated with serious problems such as collateral damage to ordinary citizens and friendly fire. Targeted killings by drones also involves several issues to be resolved, including suspicions that they may run counter to domestic law prohibiting assassination, the opacity concerning their definitions and military actions, and the impact of whiplash transition. Finally, targeted killing program and the need for transparency. The assembly referring to resolution invites the committee of ministers to undertake a thorough study of the lawfulness of the use of combat drones for targeted killings and if need be develop guidelines for member states on targeted killings with a special reference to those carried out by combat drones. These guidelines should reflect the states duties under international humanitarian and human rights law in particular the standards laid down in the EC on human rights as interpreted by the european court of human rights.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.3
• /
• pp.183-193
• /
• 2011

This study made a comparative analysis of behavioral reaction of squid to red (624nm), green (524nm), blue (460nm) & white LED light, its arrival time for the shadow section by making the shadow section in the central section of a water tank just like the bottom part of a squid jigging vessel, and on-site catching efficiency of LED fishing lamp with control fishing vessel. The color LED light showing the highest squidgathering rate as against the shadow section was found to be blue LED light with 39.3% rate under the dark (0.05lx) condition. Under the brighter condition than 0.05lx, white LED light was found to have the highest gathering rate of 41.5%. In addition, it was found that squid gathering rate was high at the shadow section which showed 6.3-fold brightness difference between the shadow section and bright section. As for the arrival time for the shadow section, blue LED light was found to be the fastest in attracting squids in 192.7 seconds under the dark condition while the red LED light was the fastest in luring squids in 164.6 seconds under the bright condition. The ratio of the squid-jigging operation and sailing in fuel consumption of the fishing vessel loaded with LED fishing lamp is about 7 to 1, showing most of the fuel is consumed more in sailing than in squid-jigging operation. As for a catch of squid, the control vessel loaded with MH (Metal Halide) fishing lamp had more catch of 600-7,080 squids than the vessel loaded with LED fishing lamp having a catch of 260-1,700 squids. In addition, even in the comparison of a catch per automatic jigging machine, the catch of the vessel loaded with MH fishing lamp excelled that of the vessel loaded with LED fishing lamp in 6 operations of squid jigging out of 9 operations. The ratio of hand-jigging and automatic jigging machine (one line) in the LED fishing lamp vessel was 1:1.1 excepting the case of having a catch only using an automatic jigging machine, showing almost the same with each other in catches, while in case of a MH fishing lamp vessel, its ratio against hand-jigging was 1 to 5.8, showing hand-jigging excelled in catches.

• Journal of Fashion Business
• /
• v.12 no.2
• /
• pp.59-71
• /
• 2008

The purpose of this thesis is to analyse the style, color, and items of '06-07 F/W women's street fashion in Dalian. The cultural, racial and geographical uniqueness, asks for the analysis, based on the individual local area on the part of Korean fashion company desiring to launch into China fashion market. I would contribute to the understanding the preference of fashion in northeastern area, thereby, affording a fundamental resources for designing strategies for Korean fashion brands in China. The period of investigation is about 15 weeks from 23 Sep. 2006 until 6 Jan. 2007, with combined use of camcorder and digital camera. The site was Victory Shopping Plaza, in center of City, also with Mycal, Ansung, Dasang department store situated in the Economic Development Zone. Finally, 900 photos were selected for analysing. The result of this study are as follows: 1. Preferred clothing styles are jean casual 45.4%(409), sports casual 16.3%(147), character casual 8%(72), feminine 20.6%(185), Classic 9.7%(87). Compare to the former study about Spring, Sports casual showed dominant rate about 36.0% in casual style. In Winter, however, the preference were changed from sport casual to jean casual. 2. Preferred clothing items are parka/padding coat 32.3%(291), jumper 31%(279), T-shirts 16%(144) and jacket 7.5%(67) for tops, pants 91.8%(826) and skirts 8.2%(74) for bottoms. In the pants, straight pants 78.4%(648), bell bottom pants 10.9%(90), capri pants 7.4%(61), cargo pants 2.9%(24), bermuda pants 0.4%(3) were listed respectively. In the skirts, A-line skirt 51.3%(38), pleats skirt 25.7%(19), flare skirt 12.2%(9), semi-tight skirt 8.1%(6), tight skirt 2.7%(2) were listed. Finally the skirt length midi 75.7%(56), mini 18.9%(14) and maxi 5.4%(4) were listed. 3. Preferred colors are red 21.8%(196), white 21.6%(194), black 16.4%(148), yellow 10.0%(90), beige 9.3%(84), green 7.9(71) and blue 6.3%(57) for tops, and black 40.8%(367), blue 37.7%(339), gray 4.6%(41), white 4.3%(39) etc. for bottoms.

• Archives of Plastic Surgery
• /
• v.34 no.1
• /
• pp.93-98
• /
• 2007

Purpose: Many options are available for the incision and pocket selection in breast augmentation. Each method has its advantages and disadvantages. To leave an invisible operation scar and to achieve easier pocket dissection by the central location of the incision on the breast, we made a transareolar-perinipple incision. To overcome the disadvantages of the transareolar incision, originally advocated by Pitanguy in 1973, we modified the direction of incision line and dissection plane. Methods: To avoid the injury of 4th intercostal nerve responsible for nipple sensation, we made perinipple incision on the medial side of the nipple instead of trans-nipple incision and made the transareolar incision as 11-5 o'clock on the left side and 1-7 o'clock on the right side instead of 3-9 o'clock on both sides. To avoid the possible infection and breast feeding problem caused by the injury to the lactiferous duct, and the possible implant hernia caused by the incisions lying on a same plane of pocket dissection, we made a subcutaneous dissection just above the breast tissue medially down to the bottom of breast tissue and made a subglandular or subfascial pocket, which may avoid the injury of lactiferous duct and create different planes for skin incision and pocket dissection. Other advantages of the transareolar-perinipple incision include easier pocket dissection, less chance of hematoma, and as a result less postoperative pain because of the central location of the approach which allow finger dissection and meticulous bleeding control with direct vision, without any specialized instrument such as an endoscope or long mammary dissectors. As for pocket selection, we made dual pockets. We prefer subglandular or subfascial pocket. Also, we made a subpectoral pocket in the upper 1/4 of the pocket to add more volume on the upper part of the augmented breast, which can make aesthetically more desirable breasts in thin Asian women with small breasts. Possible disadvantages of our method are subclinical infection and scar widening, which could be overcome by meticulous operation techniques, antibiotic therapy, and intradermal tattooing. Results: From September, 2003 to August, 2005, 12 patients underwent breast augmentation using round smooth surface saline implants by our method. During the mean follow-up period of 13 months, there were no complications such as infection, hematoma, capsular contracture, and sensory change of nipple, and results were satisfactory. Conclusion: We suggest breast augmentation via transareolar-perinipple incision and dual pockets(subpectoral-subglandular or subfascial) as a valuable method in thin oriental women with small breasts.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.203-215
• /
• 2006

Field observations on the spatio-temporal distribution of organic matter of the surface sediment were carried out at 15 stations in the central parts of the South Sea of Korea from April 2002 to January 2003. The range of water temperature and salinity in bottom waters, mud content and water content of surface sediment were $8.06{\sim}23.35^{\circ}C,\;29.20{\sim}34.51\;psu,\;71.2{\sim}99.9%$ and $38.7{\sim}68.9%$, respectively. Measured parameters on the surface sediments of ignition loss (IL), chemical oxygen demand (CODs), phaeopigment, particulate organic carbon (POC) and particulate organic nitrogen (PON) also ranged in $3.9{\sim}l2.5%,\;9.60{\sim}44.05\;mgO_2/g-dry,\;1.58{\sim}29.51\;{\mu}g/g-dry,\;3.12{\sim}13.01\;mgC/g-dry$ and $0.49{\sim}2.00\;mgN/g-dry$, respectively. The spatio-temporal distribution of organic matter demonstrated higher concentrations offshore than at lesions near the coastal line. Higher concentrations occurred in the summer and spring. The results indicated that the origin of organic matter in surface sediments in the central part of the South Sea was autochthonous rather than allocthonous because the organic matter had an average C/N ratio of 6.44 (${\pm}0.51$). However, the composition of autochthonous organic matter was mainly derived from detritus rather than living phytoplankton, which was Indicated by the results of the POC/phaeopigment ratio. A principal component analysis (PCA) indicated that 73.2% of the variability in the data was described by two factors: 1) an 'environmental factor concerning the accumulation of materials (57.3%)' and 2) 'origin of organic matter and the composition by primary production (15.9%)'. The sedimentary environment in the central part of the South Sea was divided into four regions from the factor score of the PCA by the concentrations of organic matter and the composition ratio of organic matters from phytoplankton in surface sediments.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.16-21
• /
• 2017

In this paper, a Small-sized and planer resonator design of Magnetic Resonance - Wireless Power Transfer(MR-WPT) were proposed for practical applications of mobile devices, such as a laptop, a smart-phone and a tablet pc. The proposed MR-WPT system were based on four coil MR-WPT and designed as a transmitter part (Tx) and a receiver part (Rx) both are the same shape with the same loop and resonator. There are four different spiral coil type of resonators with variable of line length, width, gap and turns in $50mm{\times}50mm$ size. The both of top and bottom side of substrate(acrylic; ${\varepsilon}_r=2.56$, tan ${\delta}=0.008$) ere used to generate high inductance and capacitance in limited small volume. Loops were designed on the same plane of resonator to reduce their volume, and there are three different size. The proposed MR-WPT system were fabricated with two acrylic substrate plane of Tx and Rx each, the Rx and Tx loops and resonators were fabricated of copper sheets. There are 12 combinations of 3 loops and 4 resonators, each combination were measured to calculate transfer efficiency and resonance frequency in transfer distance from 1cm to 5cm. The measured results, the highest transfer efficiency was about 70%, and average transfer efficiency was 40%, on the resonance frequency was about 6.78 MHz, which is standard band by A4WP. We proposed small-sized and planer resonator of MR-WPT and showed possibility of mobile applications for small devices.