• 설비공학논문집
• /
• 제15권9호
• /
• pp.779-785
• /
• 2003

The present work proposed a newly developed fluidized bed-type psychrometer that could be applicable to the high temperature and contaminant gases. The psychrometer is a device that test gas passes through the water in a glass bottle as a bubbly flow to obtain the adiabatic saturation temperature. A fluidized bed-type psychrometer was made and its characteristics were compared with the Assmann Psychrometer. The characteristic time was in the order of a hundred seconds, and decreased for the decrease of the mass of water and the increase of the air flow rate. The air flow rate and the insulation of the glass bottle were definitely important in the accurate measurement of the wet bulb temperature. The error in wet bulb temperature became less than 5 percent of the difference of dry and wet bulb temperatures if the air velocity in the glass bottle was greater than 1.5m/s.

• 분석과학
• /
• 제15권2호
• /
• pp.172-179
• /
• 2002

빗물, 증류수, 정수기 물, 지하수, 수돗물, 시판생수에 포함된 주요 환경호르몬 물질로 알려진 nonylphenol(NP), octylphenol(OP), di(2-ethylhexyl)phthalate(DEHP)를 OASIS 카트리지로 추출한 후 GC/MS를 이용하여 정량하였다. Octylphenol 은 어느 물 시료에서도 검출되지 않았으나, nonylphenol 의 경우는 그 존재량이 빗물<정수기 물<증류수<지하수<수돗물<시판생수의 순으로 증가하였으며, 시판생수의 경우 최고 $0.44{\mu}g/L$(ppb)가 포함되어 있었다. Di(2-ethylhexyl)phthalate는 모든 물 시료에 포함되어 있었으며 빗물의 경우 $1.7{\sim}2.9{\mu}g/L$, 증류수는 $8.7{\sim}31.7{\mu}g/L$, 정수기 물은 $0.6{\sim}5.6{\mu}g/L$(평균: $2.5{\pm}0.3{\mu}g/L$)로 다른 값에 비하여 매우 안정한 값을 나타냈고, 전주근교 지하수는 $1.1{\sim}6.0{\mu}g/L$, 수돗물은 평균 $3.1{\sim}5.7{\mu}g/L$, 시판생수는 $0.5{\sim}67.6{\mu}g/L$ 이였으며 시중의 시판 생수 중 40% 이상이 USEPA기준을 초과하고 있었다.

• 한국버섯학회지
• /
• 제13권2호
• /
• pp.139-144
• /
• 2015

본 보고는 버섯재배 농장에서 사용하는 배지 재료 및 혼합배지의 수분함량; 입병한 배지의 배지량, 건조무게, 액체량, 가비중; 배지혼합기에 투입하는 배지재료의 건조량, 수분량, 재료별 혼합비율; 배지의 수분함량 조절을 위한 물 소요량과 보충량, 조제한 배지의 총량을 산출하는 계산식을 만들었다. 그리고 각각을 자동으로 계산하는 엑셀파일을 작성하였다. 이 계산식들과 엑셀파일은 병재배 농가에서 배지재료비 절감, 연중 병당 양분함량 및 수분함량 유지와 새로운 배지조성을 만들기 위하여 활용할 수 있을 것이다. 이때 매일 계속되는 재배과정에서 수량 기복이나 품질 저하를 최소화 하면서 연중 안정생산에 기여할 것으로 기대한다.

• 한국산업보건학회지
• /
• 제7권2호
• /
• pp.209-222
• /
• 1997

Authors surveyed the ground water near the waste disposed from a fiberglass production factory to confirm the presence of glassfiber in the water and to determine the effect of sampling conditions and storage on the recovery of fibrous materials in the ground water. Sample was collected at every 4 hours for 48 hours consecutively. After finishing the 48 hours sample, water sampling was done from each tap after repeated turning on and off the water for 30 seconds at each time. Sample was collected in the two 1.5 liter polyethylene bottle after vigorously shaking the bottle with the same water several times with the flowing tap water. At each paired sample, one bottle was stored stand still at room temperature, and the other sample was filtered immediately after sampling. Water was filtered on the Mixed Cellulose Ester filter with negative pressure. Each sample was divided into upper and lower layer. The other bottle was stored at room temperature standstill for 7 days and filtered in the same fashion as the other pair of sample did. Each MCE filter was divided into 4 pieces and one piece was treated with acetone to make it transparent. Each prepared sample was observed by two researchers under the light and polarizing microscopy, scanning electron microscopy and energy dispersive X-ra microanalysis. Fibers were classified by the morphology and polarizing pattern under the polarizing microscope, and count was done. 1. There was a significant fluctuation in number of the fibers, but there was no specific demonstrable pattern. 2. Non-polarizing fibers frequently disappeared after 7 days's storage. But cluster of fibers were found at the wall of the same container by scratching technique. 3. Polarizing fibers were usually found in between the filter and the manicure pasted area. Possible explanations for this phenomenon will be that either these fibers are very light or have electronic polarity. Hence, these fibers are not able to be attached on the surface of slide glass. 4. Under the scanning electron microscopic examination, the fibers which are not refractive under the light microscopy were identified as glassfiber. Other fibers which is refractive under the polarizing microscopy were identified as magnesium silicate fibers. It is strongly suggested that development of standardized method of sample collection and measurement of fibrous material in the water is needed.

• 한국식품영양과학회지
• /
• 제28권4호
• /
• pp.886-889
• /
• 1999

To develope the soybean sprouting equipment(a type of cabinet) for medium amount(one bucket; 10~13kg) production of soybean sprouts, the watering system was made of four siphons and four the bottle necked water tank. Diameter of four siphons used for development of the watering system were 8, 13, 17 and 21mm, respectively and their water exhausting volumes were 40, 92, 154, 524ml/sec, respectively. The watering system can be automatically watered 524ml/sec without electric supply. The soybean sprouting equipment is consisted of four the bottle necked water tanks with the four siphons and six sprouting buckets with net shaped bottom for water draining. The soybean sprouting equipment with the watering system may be produced more than one box a day in the condition of 6~7 watering times a day at 25~30oC.

• 미생물학회지
• /
• 제11권3호
• /
• pp.129-133
• /
• 1973

The authors have investigated about the microbial contamination of goods which is a criterion of hygienic control. Conducting on investigation, a special attention has been paid on the rate of microbial contamination in the goods, especially in manufacturing process of the softdrink. The authors also made an experiment on total microbes which is the criterion of contamination in each step of the process and in raw materials together with materials to be used for subdividing. Results obtained were as follows : 1) The orgin of microbial contamination was found in bottle cap and in tap water, that is, there appeared 9 colony per ml in bottle cap and 31-74 colony per ml in tap water, respectively. 2) It was found that microbial contamination are 4 colony per ml in average through year. However, it appeared 1 colony per ml in winter and 8 colony per ml in summer. 3) Coliform groups are not detected in goods through a year. 4) There was no variation in number of total microbes after ion exchange resin passage in purification process of tap water. 5) The number of microbes in goods are decreased when the raw materials are treated in high temperature short time (HTST) sterilization.

• 월간포장계
• /
• 통권335호
• /
• pp.82-89
• /
• 2021

• Child Health Nursing Research
• /
• 제10권1호
• /
• pp.108-116
• /
• 2004

Purpose: There has been a number of reports on elution of bisphenol-A, an endocrine disrupting chemical, from milk bottles, all concerning the potential health effect of the substance. In this study, we measured the elution of bisphenol-A from milk bottles during boiling-water sterilization, to suggest a safe sterilization method. Method: Through the survey of 200 mothers, 78.5％ of them expressed their concern on the possible harmful effect of bisphenol-A, which might be eluted from the bottles. And it was found that most mothers use boiling-water to sterilize bottles; duration of boiling bottles could be divided into three groups of 3, 5, and 10 minutes. We measured the elution of bisphenol- A from three different brands of bottles, subject to various mode of sterilization found in the survey. Result: In all the measurements, the concentration of the eluted bisphenol-A was in the range of 0.3 - 0.7 ppb, far below 2.5ppm, the level set up by Korea Food ％amp; Drug Administration(KFDA) for a potential harmful effect. Conclusion: Although trace amount of bisphenol -A can be eluted from polycarbonate milk bottles during sterilization, and bottle feeding, the amount is found to be too small to cause any health related impact for infants.

• Nuclear Engineering and Technology
• /
• 제30권2호
• /
• pp.140-147
• /
• 1998

Basic concept of a cold neutron source for a 30 MW heavy water moderated reactor (HANARO) is developed. The source is a cold bottle located in a vertical hole near the reactor core. Since the bottle does not have sufficient volume for cooling, the optimum liquid mixture ratio is studied between liquid hydrogen and liquid deuterium. We also studied the variation of the gain depending on the volume of the bottle. The calculation is performed by a coupled MCNP model and by a semi-analytic approach. For the current geometry, 80% liquid deuterium mixture with liquid hydrogen gives the highest gain at 10 A neutron wave.

• 한국식물병리학회지
• /
• 제10권3호
• /
• pp.175-180
• /
• 1994

The fungal pathogen Monosporascus annonballus was first isolated in Korea from the rotted roots of bottle gourd stocks of collapsed watermelon plants in fields near Chochiwon, Choongnam province in July, 1993. Perithecia of M. cannonballus were dark brown to black, globose, 220~570 ${\mu}{\textrm}{m}$ in diam. and had many asci. Asci are hyaline, clavate to pyriform, and 50~120$\times$35~570 ${\mu}{\textrm}{m}$ in size. Ascospores were aseptate, dark brown to black, globose, 25~45$\times$30~50 ${\mu}{\textrm}{m}$ in diam, and borne singly in each ascus. The fungus grew in the temperature range of 4 to 34$^{\circ}C$, best at 3$0^{\circ}C$. The optimum pH for growth was 6.8. Mycelial growth rate of M. cannonballus was 25.5mm/day on PDA at 26$^{\circ}C$. Perithecia began to form after 20-day-growth on PDA and produced mature asci after 30 days or later. In the greenhouse inoculation tests, the fungus developed water-soaked lesions on roots of bottle gourd seedlings and was then reisolated from the lesions. Severed damages on watermelon plants by M. cannonballus are greatly concerned in Korea, since no stocks used for watermelon cultivation have reported to be resistant to the fungus.