• Journal of Powder Materials
• /
• v.25 no.2
• /
• pp.120-125
• /
• 2018

Boron nitride nanotubes (BNNTs) are receiving great attention because of their unusual material properties, such as high thermal conductivity, mechanical strength, and electrical resistance. However, high-throughput and high-efficiency synthesis of BNNTs has been hindered due to the high boiling point of boron (${\sim}4000^{\circ}C$) and weak interaction between boron and nitrogen. Although, hydrogen-catalyzed plasma synthesis has shown potential for scalable synthesis of BNNTs, the direct use of $H_2$ gas as a precursor material is not strongly recommended, as it is extremely flammable. In the present study, BNNTs have been synthesized using radio-frequency inductively coupled thermal plasma (RF-ITP) catalyzed by solid-state ammonium chloride ($NH_4Cl$), a safe catalyst materials for BNNT synthesis. Similar to BNNTs synthesized from h-BN (hexagonal boron nitride) + $H_2$, successful fabrication of BNNTs synthesized from $h-BN+NH_4Cl$ is confirmed by their sheet-like properties, FE-SEM images, and XRD analysis. In addition, improved dispersion properties in aqueous solution are found in BNNTs synthesized from $h-BN+NH_4Cl$.

• Analytical Science and Technology
• /
• v.5 no.2
• /
• pp.199-202
• /
• 1992

Ti-silicide was formed by using metal-Ti target and composite target on the silicon substrate that $BF_2$ were introduced into. Implant energies of $BF_2$ were 50keV and 90keV. The behavior of boron was investigated by SIMS. The redistribution of boron occurred during the formation of Ti-silicide by metal-Ti target and the sample implanted at the energy of 50keV showed severe out-diffusion. In the case that Ti-silicide was formed by composite target, there was little redistribution of boron.

• Horticultural Science & Technology
• /
• v.30 no.2
• /
• pp.144-151
• /
• 2012

Diagnosis of nutrient disorders in cultivating crops is based on the visual symptoms and results of soil and plant analysis. This study was carried out to investigate the influence of B concentrations in fertilizer solution on the growth of and nutrient uptake by domestically bred strawberries. Tissue analysis based on the dry weight were also conducted to determine the threshold levels in plants when toxicity developed in boron. The growth was seriously restricted in the three strawberry cultivars as the B concentrations in fertilizer solution were elevated. The fresh and dry weights were heavier and crown diameters were thicker in the 0.25 mM boron treatment than the other treatments tested. The toxicity symptoms of boron appeared on the older leaves of three strawberry cultivars while interveinal chlorosis symptoms appeared on the young leaves of 'Keumhyang' and 'Seolhyang' strawberries. The toxicity symptoms in lower leaves were developed when B concentrations in fertilizer solution were higher than 2 mM in 'Keumhyang' and 0.5 mM in 'Maehyang' and 'Seolhyang' strawberries. The elevated boron concentrations in fertilizer solution did not influence the tissue K, Ca, and Mg contents, but influenced the phosphorus contents with decreasing tendency. The tissue Fe and Zn contents decreased and increased, respectively, as the B concentrations in fertilizer solution were elevated. When the concentration of boron at which the growth of a plant is retarded by 10% is regarded as a upper threshold level, the boron contents based on dry weight of above ground plant tissue should be lower than 25.1, 44.2, and 62.5 $mg{\cdot}kg^{-1}$ in 'Keumhyang', 'Maehyang', and 'Seolhyang' strawberries, respectively.

• Smart Structures and Systems
• /
• v.18 no.5
• /
• pp.1029-1062
• /
• 2016

In this research, the nonlinear free vibration analysis of boron-nitride micro ribbon (BNMR) on the Pasternak elastic foundation under electrical, mechanical and thermal loadings using modified strain gradient theory (MSGT) is studied. Employing the von $K{\acute{a}}rm{\acute{a}}n$ nonlinear geometry theory, the nonlinear equations of motion for the graphene micro ribbon (GMR) using Euler-Bernoulli beam model with considering attached mass and size effects based on Hamilton's principle is obtained. These equations are converted into the nonlinear ordinary differential equations by elimination of the time variable using Kantorovich time-averaging method. To determine nonlinear frequency of GMR under various boundary conditions, and considering mass effect, differential quadrature element method (DQEM) is used. Based on modified strain MSGT, the results of the current model are compared with the obtained results by classical and modified couple stress theories (CT and MCST). Furthermore, the effect of various parameters such as material length scale parameter, attached mass, temperature change, piezoelectric coefficient, two parameters of elastic foundations on the natural frequencies of BNMR is investigated. The results show that for all boundary conditions, by increasing the mass intensity in a fixed position, the linear and nonlinear natural frequency of the GMR reduces. In addition, with increasing of material length scale parameter, the frequency ratio decreases. This results can be used to design and control nano/micro devices and nano electronics to avoid resonance phenomenon.

• Advances in materials Research
• /
• v.3 no.1
• /
• pp.259-269
• /
• 2014

The boron-nitrogen-containing phenol-formaldehyde resin (BNPFR)/$SiO_2$ nanocomposites (BNPFR/$SiO_2$) were synthesized in-situ, and structure of BNPFR/$SiO_2$ nanocomposites was characterized by FTIR, XRD and TEM. The loss modulus peak temperature $T_p$ of BNPFR/$SiO_2$ nanocomposites cured with different nano-$SiO_2$ content are determined by torsional braid analysis (TBA). The thermal degradation kinetics was investigated by thermogravimetric analysis (TGA). The results show that nano-$SiO_2$ particulate with about 50 nm diameter has a more uniformly distribution in the samples. The loss modulus peak temperature $T_p$ of BNPFR/$SiO_2$ nanocomposite is $214^{\circ}C$ when nano-$SiO_2$ content is 6 wt%. The start thermal degradation temperature $T_{di}$ is higher about $30^{\circ}C$ than pure BNPFR. The residual rate (%) of nanocomposites at $800^{\circ}C$ is above 40 % when nano-$SiO_2$ content is 9 %. The thermal degradation process is multistage decomposition and following first order.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.1
• /
• pp.9-16
• /
• 1978

In order to establish a better combination of nutrients of complex fertilizer for apple tree a boron-enriched complex fertilizer ($N-P_2O_5-K_2O-B_2O_5-MgO$: 10 10-0.2-2.0) was compared with various treatments using urea superphosphate, potash muriate, usual complex fertilizer (22-22-11) and borax in its effect on the various growth status such as total leaf weight per tree and shoot growth of dwarf Fuji (1 year old) and super type Starcreamson (3 year old) grown at comparatively poor soils. For Fuji grown on sandy red soils the boron-enriched complex fertilizer (BC) was best and followed by-usual complex fertilizer NPK only, NPK only+Boron, BC+high boron (17times) and no phosphorus in the order. For Starcreamson grown on heavy clayey soils CB+high boron and phosphorus was best and followed by BC, usual complex fertilizer, NPK only, BC+high boron, NPK+boron and no phosphorus in the order. Without compost in the poor heavy clayey soil the growth was worse with high boron and best with NPK+boron and followed by BC Growth was poor with high boron alone but better with phosphorus and high boron, and it was thought that boron was effective when it was distributed in soil with N.P.K. Fertilizer response of apple tree was well appeared on leaf length, new shoot length and total leaf weight per tree. Suitable formulation of a boron-enriched complex fertilizer for apple tree appeared as 10-20-10-0.6 ($N-P_2O_5-K_2O-B_2O_5$) for poor fields and fields with moderate fertility. Chemical analysis of leaves suggested Mg effect on the increase of leaf weight. Effect of Fe was similar to thatof of Mg.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.179-179
• /
• 2016

A radio-frequency (RF) Inductively Coupled Plasma (ICP) torch system was used for boron-nitride nano-tube (BNNT) synthesis. Because of electrodeless plasma generation, no electrode pollution and effective heating transfer during nano-material synthesis can be realized. For stable plasma generation, argon and nitrogen gases were injected with 60 kW grid power in the difference pressure from 200 Torr to 630 Torr. Varying hydrogen gas flow rate from 0 to 20 slpm, the electrical and optical plasma properties were investigated. Through the spectroscopic analysis of atomic argon line, hydrogen line and nitrogen molecular band, we investigated the plasma electron excitation temperature, gas temperature and electron density. Based on the plasma characterization, we performed the synthesis of BNNT by inserting 0.5~1 um hexagonal-boron nitride (h-BN) powder into the plasma. We analysis the structure characterization of BNNT by SEM (Scanning Electron Microscopy) and TEM (Transmission Electron Microscopy), also grasp the ingredient of BNNT by EELS (Electron Energy Loss Spectroscopy) and Raman spectroscopy. We treated bundles of BNNT with the atmospheric pressure plasma, so that we grow the surface morphology in the water attachment of BNNT. We reduce the advancing contact angle to purity bundles of BNNT.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.2072-2077
• /
• 2020

The purpose of this study was to demonstrate the feasibility of sensing changes in a tumor during boron neutron capture therapy (BNCT) using a Monte Carlo simulation tool. In the simulation, an epi-thermal neutron source and a water phantom including boron uptake regions (BURs) were simulated. Moreover, this simulation also included a detector for positron emission tomography (PET) scanning and an adaptively-designed collimator (ADC) for PET. After the PET scanning of the water phantom, including the 511 keV source in the BUR, the ADC was positioned in the PET's gantry. Single prompt gamma rays were collected through the ADC during neutron irradiation. Then, single prompt gamma ray-based tomography images of different sized tumors were acquired by a four-step process. Both the signal-to-noise ratio (SNR) and tumor size were analyzed from each step image. From this analysis, we identified a decreasing trend of both the SNR and signal intensity as the tumor size decreased, which was confirmed in all images. In conclusion, we confirmed the feasibility of sensing changes in a tumor during BNCT using PET and an ADC through Monte Carlo simulation.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2004.06a
• /
• pp.217-222
• /
• 2004

This study was conducted to estimate if the level of several chemical ingredients including alkanolamines or ethanolamines (EA) examined in the specific synthetic metalworking fluid (MWF) ‘A’ can cause anti-microbial activity and health effect. Three water-based MWF products (‘A’, ‘B’, and ‘C’) were studied every week for two months. Chemical ingredients such as formaldehyde, boron, EA, and copper were examined. In the sump where MWF ‘A’ was used, not only the total level of EA, monoethanolamine(MEA), diethanolamine(DEA) and triethanolamine(TEA), but also boron level were significantly higher than those of the other MWFs. ANOVA statistical tests indicated that levels of pH, alkalinity, boron, MEA, DEA and TEA in MWF ‘A’ were significantly higher than those in other MWF types. Correlation tests also found that levels of pH, alkalinity, boron, MEA, DEA and TEA in MWF ‘A’ are significantly correlated. We suggested the assumptions that excessive concentrations of EA, and borate at a high pH level, may cause anti-microbial resistance synergically. To demonstrate this assumption, additional study is needed to examine the relationship between the levels of microbes and excessive concentrations of EA, and borate at a high pH level.

• KSTLE International Journal
• /
• v.4 no.2
• /
• pp.52-55
• /
• 2003

This study was conducted to estimate if the level of several chemical ingredients including alkanolamines or ethanolamines (EA) examined in the specific synthetic metalworking fluid (MWF) "A" can cause anti-microbial activity and health effect. Three water-based MWF products ("A", "B", and "C") were studied every week for two months (from June 1, 2002 to July 30, 2002). Chemical ingredients such as formaldehyde, boron, EA, and copper were examined. In the sump where MWF "A" was used, not only the total level of EA, monoethanolamine(MEA), diethanolamine(DEA) and triethanolamine(TEA), but also boron level were significantly higher than those of the other MWFs. ANOVA statistical tests indicated that levels of pH, alkalinity, boron, MEA, DEA and TEA in MWF "A" were significantly higher than those in other MWF types. Correlation tests also found that levels of pH, alkalinity, boron, MEA, DEA and TEA in MWF "A" are significantly correlated. We suggested the assumptions that excessive concentrations of EA, and borate at a high pH level, may cause anti-microbial resistance synergically. To demonstrate this assumption, additional study is needed to examine the relationship between the levels of microbes and excessive concentrations of EA, and borate at a high pH level.