• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.3
• /
• pp.274-284
• /
• 2003

Multi-level converter that is high-capacity electric power conversion system is used widely to electric motor drive system and FATCs(Flexible AC Transmission Systems). H-Bridge converter has been prevalently applied to shunt-type system because it can be easily expanded to the multi-level. In steady states, converter is normally operated in the range of 0.7∼0.8 of modulation Index. Even though zero vectors are not imposed to high modulation index, DC-Link voltage Is constant. It means that converter has another boost vector except for zero vectors among several vectors in 3-level converter. This paper has examined the principle of boost vector and investigated the difference between another boost vector and zero vectors in 3-level converter. In addition, this paper has analysed and compared the charging currents and the capacitor voltages of two topologies. The currents and voltages are related to reference voltage. Therefore, it proposed the calculation method for the voltage ripple and the charging current of each capacitor and compared various DC-Link voltage control methods through the simulation.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06b
• /
• pp.468-470
• /
• 2012

본 논문에서는 기존 VectorBoost기반 분류기의 문제점이었던 다중 분할 노드에서의 오판단 발생을 해결하기 위해, LDA를 이용해 학습 샘플들을 가장 잘 분리할 수 있는 최적의 초평면을 구하고, 이 초평면을 이용해 Positive샘플에서 VectorBoost의 판단율을 향상시키는 방법을 제안한다. 이러한 방법을 적용했을 때 Positive샘플들의 오판단율이 감소하는 효과를 보였으며, 불필요한 연산의 감소로 약 30%의 속도향상을 얻을 수 있었다.

• IMMUNE NETWORK
• /
• v.3 no.2
• /
• pp.110-117
• /
• 2003

Background: The usefulness of DNA vaccine at priming step of heterologous prime-boost vaccination led to DNA vaccine closer to practical reality. DNA vaccine priming followed by recombinant viral vector boosting via systemic route induces optimal systemic immunity but no mucosal immunity. Mucosal vaccination of the reversed protocol (recombinant viral vector priming-DNA vaccine boosting), however, can induce both maximal mucosal and systemic immunity. Here, we tried to address the reason why the mucosal protocol of prime-boost vaccination differs from that of systemic vaccination. Methods: To address the importance of primary immunity induced at priming step, mice were primed with different doses of DNA vaccine or coadministration of DNA vaccine plus mucosal adjuvant, and immunity including serum IgG and mucosal IgA was then determined following boosting with recombinant viral vector. Next, to assess influence of humoral pre-existing immunity on boosting $CD8^+$ T cell-mediated immunity, $CD8^+$ T cell-mediated immunity in B cell-deficient (${\mu}K/O$) mice immunized with prime-boost regimens was evaluated by CTL assay and $IFN-{\gamma}$-producing cells. Results: Immunity primed with recombinant viral vector was effectively boosted with DNA vaccine even 60 days later. In particular, animals primed by increasing doses of DNA vaccine or incorporating an adjuvant at priming step and boosted by recombinant viral vector elicited comparable responses to recombinant viral vector primed-DNA vaccine boosted group. Humoral pre-existing immunity was also unlikely to interfere the boosting effect of $CD8^+$ T cell-mediated immunity by recombinant viral vector. Conclusion: This report provides the important point that optimally primed responses should be considered in mucosal immunization of heterologous prime-boost regimens for inducing the effective boosting at both mucosal and systemic sites.

• Journal of IKEEE
• /
• v.19 no.1
• /
• pp.73-79
• /
• 2015

In this paper, maximum boost space vector pulse-width modulation(MBSVPWM) strategy of Z-Source Inverters(ZSIs) is proposed. Conventional space vector pulse-width modulation(SVPWM) method of Voltage Source Inverters(VSIs) is modified to produce unique PWM patterns that realize the maximum boost control of ZSIs. This proposed method minimizes the switching power losses of ZSIs by reducing the numbers of the shoot-through states. Moreover, some switches keep ON state and the switching transitions do not occur during the specific sectors. An experimental system has been built and tested to verify the effectiveness of the proposed strategy.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.443-453
• /
• 2019

As the core component of transmission systems, converters are very prone to failure. To improve the accuracy of fault diagnosis for wind power converters, a fault feature extraction method combined with a wavelet transform and compressed sensing theory is proposed. In addition, an improved AdaBoost-SVM is used to diagnose wind power converters. The three-phase output current signal is selected as the research object and is processed by the wavelet transform to reduce the signal noise. The wavelet approximation coefficients are dimensionality reduced to obtain measurement signals based on the theory of compressive sensing. A sparse vector is obtained by the orthogonal matching pursuit algorithm, and then the fault feature vector is extracted. The fault feature vectors are input to the improved AdaBoost-SVM classifier to realize fault diagnosis. Simulation results show that this method can effectively realize the fault diagnosis of the power transistors in converters and improve the precision of fault diagnosis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.330-337
• /
• 2005

This paper proposes a method which improves the performance of face detection by using SVM(Support Vector Machine). first, it finds face region candidates by using AdaBoost based object detection method which selects a small number of critical features from a larger set. Next it classifies if the candidate is a face or non-face by using SVM(Support Vector Machine). Experimental results shows that the proposed method improve accuracy of face detection in comparison with existing method.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.489-493
• /
• 2002

This paper discover another boost vectors in high modulation index In steady states, modulation index of converter operation is normally $0.7\~0.8[p.u]$. Even though zero vectors are not imposed, DC-Link voltage is constant because 3-level boost convert has another boost vectors. and this paper proposes the analysis and the comparison for NPC and H-Bridge converter. It proposed the calculation method for the voltage ripple and charging current of each capacitor and deals with voltage balance problems of each link capacitor they are associated with the switching state, the position of reference voltage vector. Simulation and analysis are used in order to prove validity of the proposed methods.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.647-650
• /
• 2005

The paper aims on an analysis for dc boost control using Z-source inverter. The modified space vector PWM method is used for controlling both the dc boost and ac output controls in the Z-source inverter. The capacitor voltage and the voltage stress of device with both the shoot-through time and modulation index are analyzed considering the zero state time of inverter. The theoretical analysis is verified with the simulation studies and experiments with 32-bit DSP.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.116-118
• /
• 2005

In this paper, a three phase PWM noninverting Buck-Boost AC-AC converter for WCF applications is presented. The PWM noninverting Buck-Boost AC-AC converter is modelled by using vector DQ transformation whereby the basic DC characteristics equation is analytically obtained. Finally, the PSIM simulation shows the validity of the modelling and analysis.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.2
• /
• pp.104-111
• /
• 1997

In this paper, three-phase PWM AC to DC boost converter that operates with unity power factor and sinusodial input line currents is presented. The current control of this converter is based on the space vector PWM strategy with fixed switching frequency and the line currents track to reference currents within one sampling time interval. By using this control strategy low ripples in the outut current and the voltage as well as fast dynamic response are achieved with small dc link cpacitance employed.