• Archives of Plastic Surgery
• /
• 제34권5호
• /
• pp.653-655
• /
• 2007

Purpose: The umbilicus is an important aesthetic component of the abdomen. Its absence is both cosmetically and psychologically distressing to the patient. Umbilical reconstruction should always be aimed at creating an umbilicus of sufficient depth and good morphology with less scarring. The C-V flap developed for nipple reconstruction was used in an inverted fashion in case of umbilical reconstruction. The aim of this article is to report our experience of scarred umbilical reconstruction using inverted C-V flap. Methods: A 22-year-old woman presented with contracted scar tissue in the umbilical region because she had undergone surgical correction of an umbilical hernia at 5 year of age. Pedicle of the inverted C-V flap was based cephalically. For enhancing depth of the umbilicus, three anchoring sutures to linea alba were done at both lateral and caudal aspects of the umbilical tube. Primary closures were done at donor sites of the V flaps and bolster sutures were done in the caudal direction of the inverted umbilical tube. Results: The patient was satisfied with the appearance of umbilicus. Major complications such as dehiscence, infection, and delayed healing did not occur. Conclusion: The inverted C-V flap is easy and simple technique, and it can produce a satisfactory reconstruction of umbilical structure.

• 한국치위생학회지
• /
• 제13권4호
• /
• pp.669-676
• /
• 2013

Objectives : The purpose of this study is to examine correlation between clinical practice and self-esteem in empowerment of dental hygiene students. Methods : Subjects were 399 dental hygiene students in Gwangju and Jeollanamdo. They completed self-reported questionnaire from November 5 to 20, 2012, after infromed consent was accepted. Results : Higher scores in empowerment was found in students who were satisfied with curricula (p<0.05) and major(p<0.001), having higher average grades (p<0.001), and who felt the better atmosphere of the clinical practice (p<0.05) and got more marks in empowerment. The empowerment of the students had a significant positive correlation to their satisfaction with clinical practice(p<0.001) and self-esteem(p<0.001). Satisfaction with clinical practice had a significant positive correlation to self-esteem(p<0.01). Conclusions : Satisfaction with major and higher self-esteem led to empowerment, sustained research efforts should be directed into the development and application of programs that could bolster these factors.

• Archives of Plastic Surgery
• /
• 제34권6호
• /
• pp.785-791
• /
• 2007

Purpose: Paraffin has been used to augment depressed nasal contour for many years by illegally. Reported complications of nasal paraffinoma were skin thinning, displacement of nasal profile, redness, chronic inflammation and malignant change to skin cancer. The current authors report results of the secondary rhinoplasty after excision of nasal paraffinoma. Methods: Through the open rhinoplasty incision, paraffinoma was removed under direct vision. Saline irrigation and meticulous hemostasis were performed. Simultaneously, the secondary depressed nasal deformity was corrected with autogenous dermofat graft harvested from inferior gluteal fold. The dermofat was fixed to the nasofrontal area with bolster suture, and the interdormal area of the tip. Results: A total of 13 patients underwent secondary augmentation with autogenous dermofat graft after removal of paraffinoma from 2000 to 2004. The mean follow-up period was 15 months. There were no postoperative complications. All patients were satisfied with their surgical results. However, there were 10 to 20 percent resorption of the grafted dermofat. Conclusion: It is suggest that autogenous dermofat be one of good materials for the correction of the secondary deformity after removal of nasal paraffinoma. In addition, autogenous dermofat graft presented easy harvesting and manipulation for transfer, high survival rate by firm fixation to the recipient site and stable surgical results.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2000년도 추계학술대회 및 정기총회
• /
• pp.22-25
• /
• 2000

With the dawn of the 21st century, the corporate business environment started to witness the unprecedented, intense competition on global basis. As a result, the kind of corporate business activity that can respond swiftly to the new changes emerged as one of the most critical factors to increase corporate competitiveness. Being reborn as a strategy-focused organization means seeking innovation. And the strategy not involving innovation is just meaningless. It is this innovation that lies at the heart of the corporate strategy, and that is the only way for continuation of the corporation. The most important pending issue facing companies today is to bolster corporate competencies fit for new business environment, to develop corporate culture required for getting competitiveness edge back, and ultimately to put the company on the continued growth path. Corporate culture, as the very underlying belief and philosophy, is not just woven into the fabric of the corporate management strategy and into the way the company is doing its business. It also, as a regulation and norm for its employees to stick by, affects the way they think and behave. This paper aims at presenting the role of the corporate culture in working out problems encountered by companies today, like corporate innovation, instilling vitality to the organization, beefing up the underlying corporate capabilities, and making transformation required by the changing business environment.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.28-36
• /
• 1998

This investigation is the result of a structural analysis by the finite element method and static loading test for the optimal structural design of an electric railway vehicle made of stainless 301L materials. We analyzed the stress and displacement of the existing electric car-body structure for predicting the position of concentrated stress, the flow of stress, rigidity to be occurred in the car-body structure when it is subjected to the vertical load. It was exposed that the side sills and window corners around the bolsters are the weak parts of the electric car-body structure because the bolsters of the electric car-body structure were subjected to the vertical load and dynamic load to be occurred during running. The flow of stress and the cause of stress concentration in the weak zone were studied in order to prevent the concentration of stress and buckling. The rearrangement of the structure and the selection of the beam elements were also carried out for optimum design of the structure.

• 전산구조공학
• /
• 제5권3호
• /
• pp.97-103
• /
• 1992

철도, 항공 및 기계구조물등의 많은 설계문제에서는 반복하중의 영향을 받기 때문에 제조와 품질제어 공정에서 특히, 반복하중의 영향이 심한 구조부품의 피로균열에 대한 연구가 충분히 선행되어야 한다. Paris법칙에서 응력확대계수범위 .DELTA.K에 10%오차를 수반하면 피로수명 N에는 50%정도의 오차를 초래할 만큼 민감도가 매우 크다. 그러나, 선형탄성파괴역학에 근거한 p-version 유한요소법은 응력확대계수를 산정하는데 있어서 종래의 h-version 유한요소법에 비해 훨씬 적합함이 증명되고 있다. 제안된 해석법의 효율성을 입증하기 위해 철도차량의 연결접합부에 있는 T-joint부위의 피로균열해석과 원공이 있는 유한판의 원공주위에서 발생되는 균열해석이 수행되었다.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.52-57
• /
• 2018

Surface dielectric barrier discharge (SDBD), which is widely used to control turbulence in aerodynamics, has a significant effect on the radar cross-section (RCS). A four-way linearly synthesized SDBD air plasma actuator is designed to bolster the plasma effects on electromagnetic waves. The diffraction angle is calculated to predict the RCS because of the periodic structure of staggered electrodes. The simplified plasma modeling is utilized to calculate the inhomogeneous surface plasma distribution. Monostatic RCS shows the diffraction in the plane perpendicular to the electrode array and the notable distortion by plasma. In comparison, the overall pattern is maintained in the parallel plane with minor plasma effects. The trends also appear in the bistatic RCS, which has a significant difference in the observation plane perpendicular to the electrodes. The peaks by Bragg's diffraction are shown, and the RCS is reduced by 10 dB in a certain range by the plasma effect. The diffraction caused by the actuator and the inhomogeneous air plasma should be considered in designing an SDBD actuator for a wide range of application.

• 산업공학
• /
• 제2권1호
• /
• pp.79-96
• /
• 1989

Abundant hard-working and well-educated human resources were the important sources of the spectacular economic success during the last decades. In contrast to the past sources of economic growth during the 1970's when labor and capital along with economies of scale were the dominant factors (the university has played an important role in the national economic success by supplying quality labour and intellectual talent.), the level of science, technological innovation and capital inputs will be of vital importance for future economic growth in Korea. The balance of payments in technology transfer together with the current state of R & D activities has been reviewed and some of the issues and problems underlying the university system that tend to hinder research in collaboration with research institutes and industries have been outlined. Serious imbalance in the allocation of research funds among research sectors was identified as the most serious problem to be fixed. The importance of science and technology education in private universities for the enhancement of the national level of science and technology has been re-examined. Also research and development in engineering and technical services has been emphasized. In conclusion, ways to bolster the role of universities in the research environment in cooperation with industry and research institutes have been suggested.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권4호
• /
• pp.1302-1320
• /
• 2015

In cloud, everything can be provided as a service wherein a large number of users submit their jobs and wait for their services. hus, scheduling plays major role for providing the resources efficiently to the submitted jobs. The brainwave of the proposed ork is to improve user satisfaction, to balance the load efficiently and to bolster the resource utilization. Hence, this paper roposes an Adaptive Multilevel Scheduling System (AMSS) which will process the jobs in a multileveled fashion. The first level ontains Preprocessing Jobs with Multi-Criteria (PJMC) which will preprocess the jobs to elevate the user satisfaction and to itigate the jobs violation. In the second level, a Deadline Based Dynamic Priority Scheduler (DBDPS) is proposed which will ynamically prioritize the jobs for evading starvation. At the third level, Contest Mapping Jobs with Virtual Machine (CMJVM) is roposed that will map the job to suitable Virtual Machine (VM). In the last level, VM Scheduler is introduced in the two-tier VM rchitecture that will efficiently schedule the jobs and increase the resource utilization. These contributions will mitigate job iolations, avoid starvation, increase throughput and maximize resource utilization. Experimental results show that the performance f AMSS is better than other algorithms.

• Journal of Microbiology and Biotechnology
• /
• 제30권1호
• /
• pp.101-108
• /
• 2020

Infections by herpes simplex viruses have an immense impact on humans, ranging from self-limiting, benign illness to serious, life-threatening diseases. While nucleoside analog drugs are available, resistance has been increasing and currently no vaccine exists. Ginsenosides derived from Panax ginseng have been documented to inhibit several viruses and bolster immune defenses. This study evaluated 12 of the most relevant ginsenosides from P. ginseng for toxicities and inhibition of herpes simplex viruses types 1 and 2 in Vero cells. The effects of test compounds and virus infection were determined using a PrestoBlue cell viability assay. Time course studies were also conducted to better understand at what points the virus life cycle was affected. Non-toxic concentrations of the ginsenosides were determined and ranged from 12.5 μM to greater than 100 μM. Ginsenoside 20(S)-Rg3 demonstrated the greatest inhibitory effect and was active against both HSV-1 and HSV-2 with an IC₅₀ of approximately 35 μM. The most dramatic inhibition-over 100% compared to controls-occurred when the virus was exposed to 20(S)-Rg3 for 4 h prior to being added to cells. 20(S)-Rg3 holds promise as a potential chemotherapeutic agent against herpes simplex viruses and, when used together with valacyclovir, may prevent increased resistance to drugs.