• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.12.1-12.1
• /
• 2005

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.138.2-138.2
• /
• 2003

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.1133-1140
• /
• 2009

The purpose of this study is to determine the most efficient method of removing sulfur dioxide from traditional herbal medicine (hanyak) by slow boiling using a traditional pipkin and an electronic slow boiler. By boiling a hanyak batch containing] 56.4ppm of sulfur dioxide for one hour using a traditional pipkin, 96.7 percent of the sulfur dioxide was removed, while two hours of slow boiling removed ]00 percent. Among different cover materials placed over the pipkin during the slow boiling process including the traditional Korean paper (hanji), regular hanji, filter paper and regular paper, the traditional hanji produced the best performance of sulfur dioxide removal. The initial pH level of the traditional hanji was] 0.03. After one hour of slow boiling hanyak batches in a traditional pipkin covered with traditional hanji, where each batch contained sulfur dioxide of 48ppm, 193ppm, 753ppm and 1,506ppm respectively, the pH level of the hanji cover material was reduced to 9.37, 9.14, 8.9 and 8.03 in respective cases. Our experiment using an electronic medicine slow boiler showed 82.8 percent removal of sulfur dioxide after one hour of slow boiling a hanyak batch containing 753ppm of sulfur dioxide. When hanyak batches were boiled by placing traditional hanji, filter paper, active carbon and hardwood charcoal separately in the middle area within the electronic slow boiler, the sulfur dioxide removal rate was 73.6 percent, 72.8 percent, 73.9 percent and 69.5 percent, respectively. When charcoal was added so as to remove toxic materials from the hanyak, its presence impeded the sulfur dioxide flow and thus reduced the removal efficiency contrary to our anticipation.

• Korean journal of food and cookery science
• /
• v.11 no.3
• /
• pp.244-248
• /
• 1995

This study was carried out to investigate the free amino acid content, the free amino-nitrogen content and minerals such as Ca, P and Fe of chicken bone stock. The results were as follows. 1. In chicken bone stock, glutamic acid was the most abundant amino acid, Iysine, alanine, cysteine and glycine were followed oderly and these free amino acids seemed to be the most intensive flavor compounds. 2. The free amino acid-nitrogen content of chicken bone stock was increased after 3 hours boiling and began to decrease after 4 hours boiling. 3. After 3 hours boiling, Ca, P were 5.0 mg/100 g chicken bone and 42.5 mg/100 g chicken bone, respectively and began to decrease after 4 hours boiling. The ratio of Ca:P was about 7.8. Fe was increased after 4 hours boiling and began to decrease after 5 hours boiling. These results revealed the low effectiveness of Ca, P and Fe utilization of chicken bone stock, because of the very low extraction of minerals. But these results revealed the significant correlation of free amino acid, free amino-nitrogen contents and brothy flavor. So chicken bone stock on heating at 90-95$^{\circ}C$ for 3∼4 hours seemed to be the most intensive brothy flavor.

• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1117-1123
• /
• 2003

The effects of heat treatment on the physical and physical and physiological properties of wax gourd (Benincasa hispida) were examined. The applied heat treatments were autoclaved at $121^{\circ}C$ for 1 hr, boiled for 30 min, and microwaved at 680 W for 5 min. The water retention capacity (WRC) of the wax gourds was 9.43 g/g for the microwaved samples, 5.12 g/g for the boiled samples, 4.63 g/g for the raw samples, and 2.61 g/g for the autoclaved samples. Heat treatment caused to increase swelling by up to $4.4{\sim}7.8\;mL/g$. Calcium binding capacity of heat-treated wax gourd increased in the order of microwaved, boiled, raw, autoclaved samples. Scanning electron microscopy (SME) showed that autoclaving caused the most severe structural modifications, while microwave treatment produced the least modifications. The retarding effect on glucose and bile acid transport depended on the heat treatment. Only boiling showed the glucose retardation effect. Bile acid retardation effect increased in order of boiling (22.9%), autoclaving (17.1%), microwave treatment (14.3%), and raw wax gourd (8.6%). The cadmium retardation effect was significantly high in all samples.

• Journal of Food Hygiene and Safety
• /
• v.24 no.2
• /
• pp.182-187
• /
• 2009

The reduction rate of pesticide residues on spinach(bifenthrin, metalaxyl, procymidone), chard(bifenthrin, imidacloprid) and mallow(bifenthrin, chlorpyrifos, imidacloprid) were tested on each step of washing and boiling(spinach: 1, 3, 5min., chard: 3, 6, 9min., mallow: 10, 20, 30min.). The reduction rates of bifenthrin and procymidone by washing were $58{\sim}64%$ and 82%, and these were not changed significantly after boiling. In case of imidacloprid, the rates showed 43% on chard and 12% on mallow by washing, and these were highly increased to 94% after boiling. And the reduction rate of metalaxyl and chloropyrifos were 69% and 11% by washing, and $96{\sim}98%$ and $77{\sim}79%$ by boiling. Specifically we monitored the pesticide residues on both boiled vegetable and its water because there are used to cook as soup in Korea. The total residual amounts of imidacloprid and chloropyrifos were effectively removed on both boiled mallow and its water ($12%{\rightarrow}34{\sim}40%$, $11%{\rightarrow}76{\sim}79%$), however, the other tested pesticides were not changed on pesticide residues when calculated with total amounts on boiled vegetable and its water. These explained the other pesticides were just moved vegetable to water by boiling.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2696-2701
• /
• 2007

For the analysis of a two-phase flow, the interaction between two phases such as the interfacial momentum or heat transfer is proportional to the interfacial area. So the interfacial area concentration (IAC) is one of the most important parameters governing the behavior of each phase. This study focuses on the development of a computational fluid dynamics (CFD) code for investigating a boiling flow with a one-group IAC transport equation. It was based on the two-fluid model and governing equations were calculated by SMAC algorithm. For checking the robustness of the developed code, the experiment of a subcooled boiling in a vertical annulus channel was analyzed to validate the capability of the IAC transport equation. As the results, the developed code was confirmed to have the capability in predicting multi-dimensional phenomena of vapor generation and propagation in a subcooled boiling.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.4
• /
• pp.68-78
• /
• 1999

Heat transfer performance is studied for boiling and condensation of R-11 on integral-fin tubes. Nine tubes with trapezoidal integral-fins having fin densities from 748 to 1654fpm and 10,30 grooves and finned tubes with caves of 0.55 and 0.64 mm height respectively are tested. in case of condensation CFC-11 condensates at saturation stat of 32$^{\circ}C$ on the outside surface cooled by inside cooling water flows. And in case of boiling the refrigerant evaporates at a saturation state of 1 bar on the outside tube surface and heat is supplied by hot water which circulates inside of the tube,. The tube having fin transfer coefficient concerns fin tubes with caves show higher valve than low fin tube having find density of 1299fpm and 30grooves. The overall heat transfer coefficient of fin tube with caves is about 5155 W/mK at 2.8m/s of water velocity, The value is abuot 2.7 times higher than plain tube and 1.3 times higher than low fin tube having fin density of 1299fpm and 30 grooves.

• Preventive Nutrition and Food Science
• /
• v.22 no.3
• /
• pp.216-222
• /
• 2017

Antioxidant rich green leafy vegetables including garden spinach leaf, water spinach leaf, Indian spinach leaf, and green leaved amaranth were selected to evaluate the effects of water boiling and oil frying on their total phenolic content (TPC), total flavonoid content (TFC), reducing power (RP), and antioxidant capacity. The results revealed that there was a significant increase in TPC, TFC, and RP in all the selected vegetables indicating the effectiveness of the cooking process on the antioxidant potential of leafy vegetables. Both cooking processes enhanced significantly (P<0.05) the radical scavenging ability, especially the oil fried samples showed the highest values. There is a significant reduction in the vitamin C content in all the vegetables due to boiling and frying except in the Indian spinach leaf. However, the present findings suggest that boiling and frying can be used to enhance the antioxidant ability, by increasing the bioaccessibility of health-promoting constituents from the four vegetables investigated in this study.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.7 s.250
• /
• pp.646-655
• /
• 2006

The present research is an experimental study on characteristics of cooling behavior for the adjacent copper blocks with surface roughness or micro-porous coated surface. The experiments were carried out at saturation state or within subcooled states of PF5060. The effects of heater orientation and the intervals between heating surfaces or substrates were investigated under various heat flux conditions. The boiling performance of copper block with micro-porous coated surface was better than that of copper block with surface roughness. It is understood that the bubble sweeping enhances boiling performance for the heaters with inclinations of $\theta=45^{\circ}\;and\;\theta=90^{\circ}$, where as the bubble flattening decreases boiling performance for the heaters with inclinations of $\theta=135^{\circ}\;and\;\theta=180^{\circ}$. In comparison to upper heater and below heater with orientation, the upper heater has lower superheat temperature than the below heater due to the bubble sweeping. It is also found that boiling performance decreases in the case of adjacent double heaters with only 0.2cm substrate interval.