• Korean Journal of Human Ecology
• /
• v.18 no.2
• /
• pp.397-406
• /
• 2009

A Study on the Development of Brassiere Pattern for Elderly Women The purpose of this study is to develop functional and sensible brassiere for elderly women. For this purpose, 6 elderly women(aged between 65 and 69) were sampled to be measured for their body sizes and tested for their bressiere wearing. he results were as follows; 1. In order to develop the basic patterns of elderly women's bressieres, 90B size was selected and then, their bressiere fitting was tested. The foundation pattern of the size 90A was proved for the body by the wearing tests. Each angle and length of the parts on the basic line of the breasts played an important role on setting the pattern. 2. As based on the body surface shell extracted from a plastic mold(photo.2), the cup of brassiere pattern were applied to the body surface shell(photo.4), and full side stretch-wings were applied to 13% reduced body size. The design pattern of elderly women's brassiers were characterized by a round wired as well as a full cup(3piece) embracing the entire breasts. 3. As the result of the wearing test, the excellence of the experimental brassiere was recognized objectively, with high marks in all the items(fig. 6). The experimental brassiere was covering the whole breasts to cope with change according to breasts loosing. It was designed to support the breasts firmly.

• Journal of the Korean Dietetic Association
• /
• v.9 no.2
• /
• pp.106-113
• /
• 2003

The purpose of this study was to compare the growth development between age-matched 51 postmenarcheal girls (mean age 153.1$\pm$5.8 month) who were rapidly maturing and 51 premenarcheal girls (mean age 153.1$\pm$5.7 month) who were slowly maturing. Anthropometirc measurements were taken for height, body weight, body fat(%), waist and hip circumferences of subjects. These measurements of menarcheal girls were significantly higher than those of nonmenarcheal girls. There was no significant difference in BMI distribution between two groups. However, 43.2% and 20.0% respectively in the menarcheal and nonmenarcheal girls had body fat levels of 30% or above. There were significant differences in the anthropometric measurements during past 4 years from 3rd grade elementary school to present. The greatest difference between the two groups were the amount and the rate of increased height and body weight from age 9 to 10. Among menarcheal girls, height, body weight, BMI, and Röhrer index were positively related to the onset of menarche. Distinctively, there was a stronger relationship between age at menarche and anthropometric measurements when the girls were 5th grade elementary school children. These findings support that during childhood and puberty, obese girls grow faster and have earlier menarche. Furthermore, the importance of prevention of obesity was recognized in order to accelerate growth of height among the girls by delaying the age of menarche.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.9
• /
• pp.1332-1339
• /
• 2019

Heat stress exerts a substantial effect on dairy production. The temperature and humidity index (THI) is widely used to assess heat stress in dairy operations. Herein, we review the effects of high temperature and humidity on body temperature, feed intake, milk production, follicle development, estrous behavior, and pregnancy in dairy cows. Analyses of the effects of THI on dairy production have shown that body temperature is an important physiological parameter in the evaluation of the health state of dairy cows. Although THI is an important environmental index and can help to infer the degree of heat stress, it does not reflect the physiological changes experienced by dairy cows undergoing heat stress. However, the simultaneous measurement of THI and physiological indexes (e.g., body temperature) would be very useful for improving dairy production. The successful development of automatic detection techniques makes it possible to combine THI with other physiological indexes (i.e., body temperature and activity), which could help us to comprehensively evaluate heat stress in dairy cows and provide important technical support to effectively prevent heat stress.

• Journal of Fashion Business
• /
• v.25 no.2
• /
• pp.127-142
• /
• 2021

This study aims to organize the prototype design method of compression wear for women professional soccer players. Despite the excellent performance of female soccer players in world competition, most functional wear has been developed mainly for men, so professional female athletes have fewer choices. Soccer is a sport requiring core and lower body muscle strength, and muscular endurance for long periods of playing or walking on the field. Female soccer players did not differ much in upper body compared to other women, but their lower body had a smaller hip circumference than waist circumference and a larger thigh circumference, requiring compilation considering the physical characteristics and movement of athletes. Female soccer players wear sports bras while playing but regular bras and compression wear during normal exercise because they sweat on under their breast, which irritates sensitive skin. For core muscles in the upper body and to support for thigh and hip muscles in the lower body, the uniform in this study was designed by reducing the body size of a professional female soccer player in her 20s and the actual measurements of commercial compilation software to 81% of the chest circumference, 95% of the waist circumference, and 78% of the hip circumference. The design experiment in this study was a simple exercise and did not produce produce results for long-term exercise and performance improvement, but can be used to design a composition pattern system for other professional female athletes.

• Journal of Fashion Business
• /
• v.20 no.3
• /
• pp.43-53
• /
• 2016

As the quality of life has improved with development of science and technology, desire for better quality of life of disable people has also increased. Currently, prejudiced views of disabled people in South Korea are changing, but sports for all disabled people is not revitalized and social support is also inadequate. In developed countries, administration and systems for sports among people with disabilities are provided at the consumer level, and many companies willingly provide support to disabled athletes. However, in South Korea, low awareness of sports for disabled people is companied by minimal support companies. In order for South Korea to advance, support for the disable sports players is needed, especially sports-wear that fits their body conditions and differences game playing from ordinary sports players. This study specifically focused on the ice sledge hockey players, taking into account the complaints on their jersey and their special conditions through motion analysis while sleds. For the easy use of the hockey, armhole depth and sleeve breadth was reduced and sleeve hem was designed for flexibility of sleeve such that it does not slide down. Also, because only the front of the Jersey is tucked in the pants, the side vent was designed to be deep such that the back hem is prevented from being pulled. Sportswear pattern making for the players with disabilities required to account for distinct body characteristics, as compared to the ordinary players. Thus, studies that develops sports-wear design for those with disabilities contributes to the qualitative development of sports for people with disabilities.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.173-181
• /
• 2006

The purpose of this study is grasp the problem of the gymnast, Kim, Dong-Hwa's Kip to Swallow Motion in Rings, and make up for the weak points to help him to perform a better performance. Therefore, two tryouts for $28^{th}$ Athens Olympic Games were filmed using video camera then finalized with Kinematical Analysis using 3D motion analysis program followings are the form of conclusions. 1. In the very first tryout, when he was doing a Swallow Support Scale, his CM position was high and arm slope was deduction because when he was doing Kip, the ascent velocity was low and he tried excessively to pull him on rings due to relying upon angular movement of shoulder joint. 2. When he was doing drop, he let his hip angle bend only little bit and let fall so making shoulder angle wider and maintain the level horizontally occurs strong drop motion when vertical descent is happening. 3. As a result, lowering the direction of a kick makes CM's movement path lower, increase vertical ascent velocity, and it helps to do the Swallow Support motion in short period of time. 4. After a strong drop motion, which is deep and fast, would make rope of ring shake so there is a defect that the body moves to forward area. However, it does not effect in Swallow Support Scale motion. 5. In the second tryout, trunk rotation angle and arm slope was fixed decrease while doing rotary motion. When rotary motion was happening, before the body was going under the rings, maintained his arm slope horizontally so his Swallow Support Scale motion was nearly perfect.

• Fashion & Textile Research Journal
• /
• v.20 no.2
• /
• pp.219-225
• /
• 2018

The purpose of this study is to make an ideal dummy for adult Maltese with proper investigation of its character and direct measurement of dog body-shape. The results of the study are as follows; First, there were 6 factors to affect the characteristics of Maltese body in the analysis, which are size of body, leg shape, chest shape, leg thickness, body length, length between fore-legs. In the cluster analysis with the 6 factors there were two types of Maltese body. Type 1 has body characteristics with large body, thick leg, and small distance between front legs. Type 2 has average size of all factors including body size, leg thickness, and length between fore-legs. Second, type 2 was selected as a representative one to make a dummy reflected body shape of characteristics because it took 67.71% from entire considered factors and has average value in the measured size. The first dummy pattern was planned by copying the surface area of the representative body shape with the method of surgical tape. A dummy of single body with trunk and legs was made using 30's cotton cloth, polyester inside batting, compressed form PVC and metallic wire on the joint of trunk and legs to support dummy shape. The second pattern was made by correcting size difference of the pattern and adding the pattern of neck covering plate, metal magnetic button was inserted on the center of joint area of trunk and legs to make detachable legs for easy slip on and off the pet's wear.

• Geomechanics and Engineering
• /
• v.19 no.3
• /
• pp.255-268
• /
• 2019

Taking top-coal caving mining face (TCCMF) as research object, this paper considers the combination of top-coal and immediate roof as cushion layer to build the solution model of support resistance based on the theory of elastic foundation beam. Meanwhile, the physical and mechanical properties of coal-rock combination influencing on strata behaviors is explored. The results illustrate that the subsidence of main roof in coal wall increases and the first weighting interval decreases with the increase of top-coal and immediate roof thicknesses as well as the decrease of top-coal and immediate roof elastic modulus. Moreover, the overlying strata reflecting on support has negative and positive relationship with top-coal thickness and immediate roof thickness, respectively. However, elastic modulus has limit influence on the dead weight of top-coal and immediate roof. As a result, it has similar roles on the increase of total support resistance and overlying strata reflecting on support in the limit range of roof control distance. In view of sensitive analysis causing the change of total support resistance, it can be regards as the rank of three components as immediate roof weight > overlying strata reflecting on support > top coal weight. Finally, combined with the monitoring data of support resistance in Qingdong 828, the validity of support resistance determined based on elastic foundation beam is demonstrated, and this method can be recommended to adopt for support type selecting in TCCMF.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.10
• /
• pp.939-947
• /
• 2010

With the rising numbers of elderly and disabled people, the demand for welfare services using a robotic system and not involving human effort is likewise increasing. This study deals with a mobile-robot system combined with a BWS (Body Weight Support) system for gait rehabilitation. The BWS system is designed via the kinematic analysis of the robot's body-lifting characteristics and of the walking guide system that controls the total rehabilitation system integrated in the mobile robot. This mobile platform is operated by utilizing the AGV (Autonomous Guided Vehicle) driving algorithm. Especially, the method that integrates geometric path tracking and obstacle avoidance for a nonholonomic mobile robot is applied so that the system can be operated in an area where the elderly users are expected to be situated, such as in a public hospital or a rehabilitation center. The mobile robot follows the path by moving through the turning radius supplied by the pure-pursuit method which is one of the existing geometric path-tracking methods. The effectiveness of the proposed method is verified through the real experiments those are conducted for path tracking with static- and dynamic-obstacle avoidance. Finally, through the EMG (Electromyography) signal measurement of the subject, the performance of the proposed system in a real operation condition is evaluated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.4751-4755
• /
• 2011

This study investigates the plastic suspension assembly which is installed on inside of vehicle seat and support passenger's back to supply the comfortable ride performance. It aims to develop the structural design in order to support driver's back uniformly and assemble seat back frame with plastic suspension effectively. The part of suspension is designed by considering the body pressure distribution of driver and it has the same size as the practical model on simulation analysis. It is confirmed that the analysis result of plastic suspension approaches the practical measured values and the better body pressure distribution can be obtained as compared with the existing wire type.