• Journal of the Korean Home Economics Association
• /
• v.20 no.3
• /
• pp.1-8
• /
• 1982

In this study, we attempted to make an original pattern of clothing for an abnormal type of figure, especially for the type of kyphosis. We measured the curvature of the spine of a woman with kyphosis with a Martin measuring instrument and a silhouetter in the following ways. First, we counted the rate of shrinkage of the standard lines drawn on the surface of the body according as the body moved. Secondly, placing the front and back darts, the front and back shoulder darts and the side darts according to“Munhwa”pattern, we made cubic cuttings of four moving postures as well as the standing one. Thirdly, we superposed the developed patterns of the standing and the moving postures, measuring the position change and the amount to the change of the darts, and compared them. The results are as follows: 1) In the developed pattern of a cubic cutting of the basic pattern and the standing posture, the neckhole became larger than that of the basic pattern, and the waist line was lowered than that of the basic pattern because the center back line was shortened due to the curved backbone.

• Childhood Kidney Diseases
• /
• v.11 no.2
• /
• pp.145-151
• /
• 2007

Hypertonicity (hypernatremia) of extracellular fluid causes water movement out of cells, while hypotonicity(hyponatremia) causes water movement into cells, resulting in cellular shrinkage or cellular swelling, respectively. In most part of the body, the osmolality of extracellular fluid is maintained within narrow range($285-295 mOsm/kgH_2O$) and some deviations from this range are not problematic in most tissue of the body except brain. On the other hand, the osmolality in the human renal medulla fluctuates between 50 and $1,200 mOsm/kgH_2O$ in the process of urine dilution and concentration. The adaptation of renal medullary cells to the wide fluctuations in extracellular tonicity is crucial for the cell survival. This review will summarize the mechanisms of urine concentration and the adaptation of renal medullary cells to the hyper tonicity, which is mediated by TonEBP transcription factor and its target gene products(UT-A1 urea transporter etc.).

• Journal of the Korean Ceramic Society
• /
• v.20 no.3
• /
• pp.217-226
• /
• 1983

Adquate amount of calcia was added to the regent-grade Zirconia body. Here the amount and the form of calcia were 7-21 mol% and regent-grade calcium cabonate respectively. The specimens were fired at 175$0^{\circ}C$ for 0, 3, 5 and 7 hours respectively. The phase Strength X-ray diffraction analysis and Scaning electron microscopy. The results were as follows (1) As the additive amount of calcia was increased the firing linear shrinkage apparent density compressive strength and modulus of rupture decreased but the apparent porosity increased. (2) The specimens soaked and containing calcia displayed the grain growth. (3) Monoclinic and cubic zirconia were seen in the sepcimens containing 7 mol% calcia. When without soaking the specimens containing 7-10 mol% calcia had the volume change by monoclinic$\rightleftharpoons$tetragonal transformation. (4) The lattice parameter increased according as the calcia additive was increased. The specimens containing above 19mol% calcia had the costant lattice parameter. The value of that was from 5.1264 to 5.1396 $\AA$ in the case of 7 hours soaking.

• Journal of the Korean Chemical Society
• /
• v.7 no.2
• /
• pp.153-158
• /
• 1963

A review of the literature is cited. Little exact information exists on the relation between clay materials and talc. The raw materials which are used in making steatite body consist of talc, clay, feldspar, and flint mined in Korea. The percentage absorption and linear burning shrinkage are measured and then discussed. The vitrified bodies were used in measurement of dielectric properties. The method of measurements for dielectric properties are described too.

• Archives of Plastic Surgery
• /
• v.35 no.3
• /
• pp.248-254
• /
• 2008

Purpose: Human acellular dermal matrix(ADM) is widely used in the treatment of congenital anomalies and soft tissue deficiencies. But it is rapidly degraded in the body and does not provide satisfactory results. There is a need to improve collagen fiber stability through various methods and ultimately regulate the speed of degradation. Methods: The ADMs were added with various cross-linking agents called glutaraldehyde, dimethyl 3,3'-dithiobispropionimidate to produce cross-linked acellular dermal matrices. 1,4-butanediol diglycidyl ether solution was applied with a pH of 4.5 and 9.0, respectively. The stability of cross-linked dermal matrix was observed by measuring the shrinkage temperature and the degradation rates. The cross- and non-cross linked dermis were placed in the rat abdomen and obtained after 8, 12 and 16 weeks. Results: The shrinkage temperature significantly increased and the degradation rate significantly decreased, compared to the control(p<0.05). All of cross-linked dermises were observed grossly in 16 weeks, but most of non-cross linked dermis were absorbed in 8 weeks. Histologically, the control group ADM was found to have been infiltrated with fibroblasts and most of dermal stroma were transformed into the host collagen fibers. However, infiltration of fibroblasts in the experiment was insignificant and the original collagen structure was intact. Conclusion: Collagen cross-linking increases the structural stability and decreases degradation of acellular dermis. Therefore, decrease in body absorption and increase in duration can be expected.

• Journal of Nutrition and Health
• /
• v.6 no.4
• /
• pp.23-36
• /
• 1973

This study was designed to compare the effect of dietary intakes on different quality protein & levels of caloric consumption supplemented by sugar at the level of 26% of total caloric intakes. 30 males and same number of females of Albino rats, aged 30-40 days were devided into following six groups, 5 rats each. ACO Group: Ad libitum, Casein, no sugar group ACS Group: Ad libitum, Casein, 26% sugar supplemented group RBO Group: 50% restriction,Bean, no sugar group RBS Group: 50% restriction, Bean, 26% sugar supplemented group RAO Group: 50% restriction, Anchovy, no sugar group RAS Group: 50% restriction, Anchovy, 26% sugar supplemented group The rats were kept in individual cage and given 6 different diet for 12 weeks. The result of this study were elucidated as follow. Body weight gained and organ weight showed no significant differences between sugar supplemented group and the others. It was noteworthy that the shrinkage of female sex organ supplemented by sugar in the diet showed lower degree than that of compared groups in this study. In other word, degree of shrinkage due to protein-caloric restriction was decreased by sugar supplementation. Nitrogen Metabolism and total nitrogen retention were not observed any significant differences between sugar supplemented group and the others. Dental caries showed higher incidence for sugar supplemented groups. Hematology and bone growth showed no differences in this study. The similar results on the metabolic effects concerned the above view Points were obtained in the different protein groups such as bean & anchovy as protein sources in the diet. Caloric restriction Produced a lower growth-rate, lower body weight and poorer long bone growth. But composition of bone ash, concentration of nitrogen, calcium and blood glucose, liver fats and liver water content maintenanced at the same levels of standard group.

• Korean Journal of Human Ecology
• /
• v.16 no.4
• /
• pp.801-811
• /
• 2007

This study attempts to propose a pattern design of snug fitting midi briefs for women. Each briefs made of two kinds of fabric, cotton 40's and cotton 40's spandex, was produced for the research in a different shrinkage rate. The result of wearing test of the briefs-sold-in-the-market (BSM) and the briefs-specially-made-for-this-research (BSMR) were as follows: BSMR showed a higher mark than that of BSM in the sense of close fit on the torso, comfortableness, sense of being tight, satisfaction and beauty. In particular, the back design line of BSM gave a lower satisfaction to test wearers, while that of BSMR gave a more comfortableness to them, making their hip comfortably being wrapped by making smoother the angle of the straight line linking sidelines with clutch part, and making sidelines into curve. In a forward research, further studies about grading and other patterns but midi pattern of briefs would be examined.

• Journal of the Korean Ceramic Society
• /
• v.39 no.10
• /
• pp.919-927
• /
• 2002

In order to fabricate double-layered porous materials powders of different particle sizes were pressed stepwise. Ford＇s equation which predicts the fired density with the change in pressed density was employed in order to adjust the difference in sintering shrinkage of the green body with double-layered porous structure. Double-layered porous materials were characterized by investigating microstructures and permeability. SEM micrographs showed the distinct difference in pore sizes of double-layered porous material. Permeability of single-layered porous material increased by increasing the starting particle sizes and porosity as well. Permeability of the double-layered porous material depends largely on the layer of small pore diameter.

• Journal of Technologic Dentistry
• /
• v.23 no.2
• /
• pp.151-160
• /
• 2002

The purpose of this study was to evaluate the influence of sprue joint form on castability in dental prosthetics. The researcher carried out experimental study according to the type was divided by sprue joint form. Therefore type A was made thicken than sprue diameter of type B and type C was made it conversely. The results were as follows: 1. In the order of castability, type C(87.8%) was first and then type A(87.0%) and type B(79.2%) was last. However there was no significant difference statistically. 2. If reservior was located at the correct position and in sufficient size, internal shrinkage porosity in the casting bodies were not generated in the type of all. 3. At the reservoir, internal shrinkage porosity was generated first in type A, followed by type Band type C in the order named. Although it gives no impact on casting body, porosity seems to appear the least when it's produced in the form of type C.

• Korean Journal of Materials Research
• /
• v.29 no.2
• /
• pp.106-115
• /
• 2019

Recently, metal cases are widely used in smart phones for their luxurious color and texture. However, when a metal case is used, electric shock may occur during charging. Chip capacitors of various values are used to prevent the electric shock. However, chip capacitors are vulnerable to electrostatic discharge(ESD) generated by the human body, which often causes insulation breakdown during use. This breakdown can be eliminated with a high-voltage chip varistor over 340V, but when the varistor voltage is high, the capacitance is limited to about 2pF. If a chip capacitor with a high dielectric constant and a chip varistor with a high voltage can be combined, it is possible to obtain a new device capable of coping with electric shock and ESD with various capacitive values. Usually, varistors and capacitors differ in composition, which causes different shrinkage during co-firing, and therefore camber, internal crack, delamination and separation may occur after sintering. In addition, varistor characteristics may not be realized due to the diffusion of unwanted elements into the varistor during firing. Various elements are added to control shrinkage. In addition, a buffer layer is inserted in the middle of the varistor-capacitor junction to prevent diffusion during firing, thereby developing a co-fired product with desirable characteristics.