• 한국군사과학기술학회지
• /
• 제5권4호
• /
• pp.88-96
• /
• 2002

The CSCM Upwind method and Material Transport Analysis(MTA) have been used to predict the thermal response and shape changes for charring/non-charring material which can be used as thermal protection material(TPM) on blunt-body nose tip. We performed intensive flight trajectory simulations to compare 1-D MTA results with those of 2-D/Axisymmetric MTA by using MTAs and Navier-Stokes code. Theheat-transfer rate and pressure distribution were predicted at selected altitudes and wall temperature along the flight trajectory and the shape changes of blunt-body nose tip were predicted subsequently by using current procedure.

• Journal of Radiation Protection and Research
• /
• 제36권1호
• /
• pp.1-7
• /
• 2011

A simple mathematical model of simultaneous combined action of environmental agents has been proposed to describe the synergistic interaction of microwave and high ambient temperature treatment on animal heating. The model suggests that the synergism is caused by the additional effective damage arising from an interaction of sublesions induced by each agent. These sublesions are considered to be ineffective if each agent is taken individually. The additional damage results in a higher body temperature increment when compared with that expected for an independent action of each agent. The model was adjusted to describe the synergistic interaction, to determine its greatest value and the condition under which it can be achieved. The prediction of the model was shown to be consistent with experimental data on rabbit heating. The model appears to be appropriate and the conclusions are valid.

• Journal of Chest Surgery
• /
• 제21권2호
• /
• pp.203-210
• /
• 1988

The clinical experience with the activated clotting time[A.C.T.] for the control of heparin and protamine therapy during cardiopulmonary bypass in 40 patients between April, 1987 and September, 1987 is reviewed retrospectively. All of patients used with cold blood potassium cardioplegia for myocardial protection under standard cardiopulmonary bypass, priming and perfusate techniques respectively. This study was divided into 2 groups of patients followed by cardiopulmonary bypass time. Twenty patients, within 60 minutes of cardiopulmonary bypass time[group A] were compared with twenty patients, from 60 to 120 minutes of cardiopulmonary bypass time[group B]. Using blood cardioplegia for myocardial protection, Author observed wide variation of A.C.T. in individual response to initial heparinization[2mg /kg] and no requirement of additional heparin during cardiopulmonary bypass until 120 minutes. Total heparin amount during cardiopulmonary bypass was not related to body weight and body surface area in the both groups. After cardiopulmonary bypass, amounts of protamine for neutralization of heparin were more required in group B.

• 치과방사선
• /
• 제29권1호
• /
• pp.255-260
• /
• 1999

Purpose: The objective of this study was to evaluate the possibility of substitution of the zonography for the full-mouth periapical radiography in aspect of radiation protection. Materials and Methods: Rando phantom and LiF TLD chips were used for dosimetry. The absorbed doses at brain, skin above the TMJ. parotid gland. bone marrow in the mandibular body. and thyroid gland during the full-mouth periapical radiography. panoramic radiography. and zonography were measured. Resul ts: From the zonography. the absorbed doses to the brain. the skin over the TMJ. and the parotid gland were relatively high. but the absorbed doses to the bone marrow in the mandibular body and. especially. the thyroid gland were very low. Conclusion: The zonography can be an alternative to the full-mouth periapical radiography in aspect of radiation protection.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.335-338
• /
• 2005

In this paper, we propose a downlink power control scheme to apply in the unequal error protection multi-code CDMA mobile medicine system. The mobile medicine system contains (i) blood pressure and body temperature measurement value, (ii) ECG medical signals measured by the electrocardiogram device, (iii) mobile patient's history, (iv) G.729 audio signal, MPEG-4 CCD sensor video signal, and JPEG2000 medical image. By the help of the multi-code CDMA spread spectrum communication system with downlink power control scheme and unequal error protection strategy, it is possible to transmit mobile medicine media and meet the quality of service. Numerical analysis and simulation results show that the system is a well transmission platform in mobile medicine.

• Journal of Radiation Protection and Research
• /
• 제28권4호
• /
• pp.291-298
• /
• 2003

The KN-12 transport cask has been designed to transport 12 PWR spent nuclear fuel assemblies and to comply with the regulatory requirements for a Type B(U) package. The containment boundary of the cask is defined by a cask body, a cask lid, lid bolts with nuts, O-ring seals and a bolted closure lid. The containment vessel for the cask consists of a forged thick-walled carbon steel cylindrical body with an integrally-welded carbon steel bottom and is closed by a lid made of stainless steel, which is fastened to the cask body by lid bolts with nuts and sealed by double elastomer O-rings. In the cask lid an opening is closed by a plug with an O-ring seal and covered by the bolted closure lid sealed with an O-ring. The cask must maintain a radioactivity release rate of not more than the regulatory limit for normal transport conditions and for hypothetical accident conditions, as required by the related regulations. The containment requirements of the cask are satisfied by maintaining a maximum air reference leak rate of $2.7{\times}10^{-4}ref.cm^3s^{-1}$ or a helium leak rate of $3.3{\times}10^{-4}cm^3s^{-1}$ for normal transport conditions and for hypothetical accident conditions.

• 한국실내디자인학회논문집
• /
• 제21권6호
• /
• pp.177-185
• /
• 2012

The endowed privilege to an established profession acts as an important motivation related to professionalization of occupations. The established profession enjoys cognitive, legal, and economic privilege. This study analyzes the professionalization process of interior design. Specifically, the study evaluates the suitability of the body of knowledge and professional ethos(i.e., protection of citizen's health, safety, and welfare), while analyzing the professionalization of interior design in the United States. The research aims at proposing a reference point for the professionalization of Korean interior design. Utilized data include research paper, court sentencing, and reports published by related professional organizations. The study concludes that 3E's are a means of professionalization of interior design, while separating interior design from interior decorating. In addition, there is no evidence to the protection of citizen's HSW. Rather, it increases service costs and restricts the job opportunities. When the public is not persuaded, the argument related to the necessity of license for the protecting citizen's HSW can be consumed as a mere rhetoric, concealing intentions for formulating a cartel. Thus, this study proposes that the professionalization of interior design may focus on the establishment of identity and body of knowledge, which are specific to interior design.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 춘계학술발표회요약집
• /
• pp.397-397
• /
• 2001

• Journal of Radiation Protection and Research
• /
• 제39권1호
• /
• pp.46-53
• /
• 2014

방사선사고 시 내부오염 평가대상의 범위는 성인뿐만 아니라 소아까지 전 연령층으로 확대된다. 본 연구에서는 전신계수기의 측정 정확도를 향상시키기 위해 측정대상의 인체 크기와 측정 위치에 따른 계수효율을 평가하였다. 본 연구에서는 한국원자력의학원에서 사용하는 전신계수기인 FASTSCAN에 대해 방사선수송코드를 이용하여 전산 모사하였다. 측정한 계수효율과 계산한 계수효율의 상대편중은 4세 소아의 경우 2% 이하이였으며, 성인의 경우에도 5% 이하로 일치하였다. 측정 대상의 키가 작을수록 검출기와의 거리가 멀어지는 문제를 보완하고 인체 크기에 따른 계수효율의 일관적인 경향성을 도출하기 위해, 측정대상의 측정 위치를 조절하여 전신계수기의 계수효율을 평가하였다. 조절된 측정 위치에서의 전신계수기 계수효율을 바탕으로 측정 대상의 인체 크기 차이에 의한 내부오염도 평가 시 측정 오차를 줄일 수 있는 인체 크기 보정인자를 도출하였다. 도출된 보정인자는 전신계수기 측정결과에 곱하여 측정대상의 내부오염도를 쉽게 평가할 수 있으며, 궁극적으로 방사선사고 시 전신계수기를 이용한 내부오염도의 측정 정확도를 크게 향상시킬 수 있을 것이다.

• 한국추진공학회지
• /
• 제18권3호
• /
• pp.34-39
• /
• 2014

center-body디퓨져에 대한 형상 설계 요소를 분석하고 수치적 기법을 통한 설계형상 변수를 구성하였다. 수치기법으로는 Center-body 디퓨져의 내부유동해석을 위하여 2차원 축대칭 Navier-Stokes equation와 $k-{\epsilon}$ 난류모델을 사용하였다. 또한 center-body디퓨져의 시동압력과 진공도 및 형상설계변수에 대해서 2차목 디퓨져와 비교하였다. 냉각시스템의 성능향상 방안으로 CBD의 원추선단에 역류제트를 활용한 TPS시스템의 개념을 제시하였다.