• Journal of computational fluids engineering
• /
• v.7 no.3
• /
• pp.1-8
• /
• 2002

The counter jet flow which is injected against the free stream at stagnation region of blunt body for improvement of aerodynamic performance has been studied by using upwind Navier-Stokes method. The variations of drag force and upwind forward penetration depth due to changes in the stagnation thermodynamic properties of counter jet flow such as total pressure, Mach number, and total temperature have been studied. The results show that the changes in the stagnation pressure and Mach number have large effects on the wall pressure and drag force, but the total temperature does not affect the wall pressure and drag force.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.243-248
• /
• 2001

A radial artery pulse wave is well known as a good mans to diagnose human body condition in th field of Chinese medical science. Information about constitution as well as organs can be obtained by detecting the artery pulse wave. Recently, the information about the human body constitution may be utilized in accelerating the recovery process of the patient on the basis of comprehensive diagnosis. A radial artery pulse wave is considered as one of promising means in examining the human body constitution. Since the examination has been conducted by the feeling of finger, the diagnosis may occasionally have uncertainty or fatal error. In this paper, a new measuring system is suggested and developed to examine the pattern of a pulse wave correctly. The system is composed of four pressure vessels, pressure sensors and air supplying pumps. One of them is utilized for appropriately pressing the radial artery, three of them for detecting pressure change in several mmHg level. The detected data is shown and discussed.

• Journal of Welding and Joining
• /
• v.18 no.2
• /
• pp.100-104
• /
• 2000

Pressure vessels usually consist of main body and pipes which are connected with the main body. And as joining method of such main body and pipes, welding is carried out. After welding, welding residual stresses inevitably occur around welded joints. As residual stresses act harmfully on fatigue strength, corrosion and buckling strength of structure, PWHT is carried out for the purpose of removing the residual stress. But, during PWHT process, $2\frac{1}{4}Cr-1Mo$ steels are frequently apt to generate reheat crack. For this reason, it is strongly needed to analyze and examine the mechanical behavior of welded joints before and after PWHT process. So, in this study, welded nozzle parts of pressure vessel where reheat cracks frequently occur are selected for examining the mechanism of crack-occurrence.

• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.1
• /
• pp.14-19
• /
• 2009

The typical aeroelastic analysis for a complex configuration such as a complete aircraft was done using the aerodynamic results of the wing and the structural modes of a complete aircraft; that is, the aerodynamics of a wing of a complete aircraft is assumed to be not much influenced by the body shape. Nevertheless, the body shape can cause a distortion of aerodynamic pressure on the wing surface and it is necessary to investigate the body effect in flutter analysis. In this reseasrch, MGM inverse design method is applied to include the body effect of a wing-body model which disturbs the pressure distribution on the wing surface.

• Journal of Nutrition and Health
• /
• v.31 no.1
• /
• pp.72-79
• /
• 1998

This study was intended to figure out the difference of the blood lipids, insulin and nutrients intake by fat distribution among the obese young male in Korean. Twenty-eight male college students participated in this study, whose to find out body fat distributions were classified on the basis of Waist /hip ratio (WHR) into three groups-upper body type (UBTM), intermediate body type(IBTM) and lower body type (LBTM). To conduct this study, anthropometric measurements , blood pressure, serum lipids and insulin levels, and daily nutrients intake were analized . The results are as follows : The three body type groups showed significant differences each other in waist circumference(p<0.05), WTR(p<0.001) and body fat percentage (p<0.05). Also they showed significant difference each other in the daily construction in the daily energy intake. But they did not show significant differences in the blood pressure, serum lipids and insulin levels. From the above results, we could concluded that the body fat distribution in obese the young men could affect nutrients intake pattern.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.4
• /
• pp.209-214
• /
• 2011

This study suggests a Healthcare System for elderly and disabled who have mobility impairment and use a wheelchair for long time. Seating long time in a wheelchair without reducing pressure causes high risk of developing pressure sores. Pressure sores come with great deal of pain and often lead to develop complication. Not only it takes time and effort to treat pressure sores but also increases medical expenses. Therefore, we will develop a device to help to prevent pressure sores by measuring pressure distribution while seating in a wheelchair and wirelessly send information to user device to check pressure distribution in real time. The equipment to measure body pressure is composed of FSR sitting mat which is a sensor measuring part and an user terminal which is a monitoring part. The designed mat is matrix formed FSR sensor to measure pressure. The sensor send measured data to the controller which is connected to the end of the mat, and then the collected data are sent to an user terminal through a bluetooth. Developing a pressure monitoring system will help to prevent those who have mobility impairment to manage pressure sores and furthermore relieve their burden of medical expenses.

• Korean Journal of Community Nutrition
• /
• v.2 no.3
• /
• pp.327-337
• /
• 1997

The purpose of this study was to investigate the differences in anthropometric, hematologic, and lipidologic data between normocholesterolemia and hypercholesterolemia and influencing factors in hypercholesterolemia in middle-aged men in Kwang-ju. 179 middle-aged men were involved. Anthropometric data(body weight, height, body circumferences and skinfold thickness) and hematologic data(blood pressure, fasting blood glucose, albumin and hemoglobin) were measured. Bleed lipid profile(total cholesterol, tr- iglyceride, phospholipid, HDI-cholesterol, LDL-cholesterol and VLDL-cholesterol) were analyzed. To determined using questionnaire. The subjects were classified as hypercholesterolemic based on The Guideline for Korean Hyperlipidemia. body mass index, systolic blood pressure, waist and hip circumference, and triceps, subcostal, abdomen, subscapular and suprailliac skinfold thicknesses of the hypercholesterolemic group were significantly higher than in the normocholesterolemic group. The concentrat- ion of cholesterol, triglyceride, phospholipod. HDL-cholesterol, LDL-cholesterol and VLDL -cholesterol of the hypercholesterolemic group were significantly higher than normocholesterolemic group. The concentration of cholesterol has a significantly positive correlation with body mass index, diastolic blood pressure, waist circumference, waist/thigh ratio and skinfold thickness(triceps, subcostal, abdomen, and supraillic skin- fold thickness). The general tendency of socioeconomec status, frequencyu of meat intake, smoking amounts and duration and duration and drinking frequencies and amount were higher in the hypercholesteolemic group but not significant. In conclusion, hypercholesterolemia in middle-aged men was closely correlated with upper body fat obesity and most of them had an accompanied high triglyceride level tendency.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.1
• /
• pp.70-81
• /
• 2017

Various components of an engine nozzle are modeled as flexible multi-body components that are operated under high temperature and pressure. In this paper, in order to predict complex behavior of an engine nozzle, thermo-fluid-flexible multi-body dynamics coupled analysis framework was developed. Temperature and pressure on the nozzle wall were obtained by the steady-state flow analysis for a two-dimensional nozzle. The pressure and temperature-dependent material properties were delivered to the flexible multi-body dynamics analysis. Then the deflection and strain distribution for a nozzle configuration was obtained. Heat conduction and thermal analyses were done using MSC.NASTRAN. The present framework was validated for a simple nozzle configuration by using a one-way coupled analysis. A two-way coupled analysis was also performed for the simple nozzle with an arbitrary joint clearance, and an asymmetric flow was observed. Finally, the total strain result for a realistic nozzle configuration was obtained using the one-way and two-way coupled analyses.

• Journal of the Korean Home Economics Association
• /
• v.49 no.4
• /
• pp.105-113
• /
• 2011

The purpose of this study was to develop the pattern of scuba diving suits for local men in their thirties by using 3D body-scanned data. It is widely acknowledged that draping method is more suitable than flat pattern for body shape as most scuba diving suits in the market are designed to fit the body tightly in a single piece with sleeves and legs. A dummy for this study was made based on men's standard clothing sizes in 30's which was derived from data of 2004 Size Korea. Accordingly, the basic body block was built upon through draping method. Next, a scuba diving suit was made from neoprene, followed by fit and the clothing pressure tests in order to evaluate the diving suit's functionality and comfort. The results of the fit test had high points of 4.33 in majority parts except armhole and crotch ones. In comparison of clothing pressure between wearer and dummy, the clothing pressure of wearer was indicated relatively low in most parts other than armhole and knee, resulting from cushion function of skin and muscle and high stretch of fabric.

• Journal of Yeungnam Medical Science
• /
• v.10 no.2
• /
• pp.345-359
• /
• 1993

This study was conducted to identify the factors related to the blood pressure in school children. The study subjects were 144 boys and 140 girls aged 10 years old, 4th grade student of one elementary school in Taegu City. Blood pressure and 18 variables for 284 school children were measured in May 1992. A weight-for-height index, R$\ddot{o}$hrer index(weight/$height^3$) was calculated for each individual as a measure of obesity. Body fat percent, fat weight, and lean body mass were measured by impedance fat meter(Model SIF-891). Serum total cholesterol, high-density lipoprotein, triglyceride, uric acid, total protein, and electrolyte were measured by automated clinical chemistry analyzer(Hitachi 4020). Low-density lipoprotein and atherogenic index were calculated by the equation. The variables assessed were sex, systolic blood pressure, diastolic blood pressure. R$\ddot{o}$hrer index, body fat percent, body fat weight, lean body mass, total cholesterol, high-density lipoprotein, low-density lipoprotein, uric acid, total protein, serum electrolyte and blood glucose. The mean systolic and diastolic blood pressures for boys were 104.1mmHg and 66.6mmHg and those for girls were 102.9mmHg and 67.5mmHg. Systolic blood pressure of boys was positively correlated with height, weight, R$\ddot{o}$hrer index, fat weight, lean body mass, and triglyceride. Systolic blood pressure of girls was positively correlated with height, weight, lean body mass, and uric acid. Diastolic blood pressure of boys was positively correlated with weight. R$\ddot{o}$hrer index, and lean body mass. Diastolic blood pressure of girls was positively correlated with height, weight, fat weight, and lean body mass and negatively with total serum protein. In multiple regression analysis for the systolic blood pressure, the significant independent variables were R$\ddot{o}$hrer index and serum sodium in boys, and serum uric acid, fat percent, and R$\ddot{o}$hrer index in girls. In multiple regression analysis of the diastolic blood pressure, the significant independent variables were R$\ddot{o}$hrer index in boys and total serum protein in girls. This study indicated that important factors influencing blood pressure in school children were R$\ddot{o}$hrer index, fat percent, serum sodium, uric acid, and total protein. R$\ddot{o}$hrer index was most important among these. It is recommended to enforce the nutritional education for diet control of obesity to prevent hypertention in children and to adopt healthy life-styles that promote good health and prevent development of cardiovascular risk factors.