• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.232-233
• /
• 2005

In this paper, disk-type ultrasonic motor using a combination of radial and bending vibration modes is newly designed and fabricated. The characteristics of the test motor are also measured. By means of travelingelastic wave induced at the surface of circumference of the elastic disk, a steel bar in contact with the surface of circumference of elastic disk bonded onto the piezoelectric ceramic disks is driven inboth directions by changing the sine and cosine voltage inputs. The stator of the motor is composed of two sheets of piezoelectric ceramic disk to bond onto both surfaces of a elastic disk, respectively. As the results, the diameter of elastic body is increased, the resonant frequency is decreased. The resonant frequency of the stator is about 92 kHz, which is composed with piezoelectric ceramic disks of 28 mm in diameter and 2 mm in thickness, and an elastic body of 32 mm in diameter and 2 mm in thickness. A driving voltage of 20 Vpp produces 200 rpm with a torque of 1Nm and an efficiency of about 10 %.

• 한국치위생학회지
• /
• 제16권6호
• /
• pp.815-824
• /
• 2016

Objectives: The purpose of the study is to investigate the relationship between obesity and periodontal diseases in adults. Methods: The subjects were 6,762 adults over 19 years old selected from the 6th Korean National Health and Nutrition Examination Survey (2013). The study instruments included periodontal status of periodontal diseases, body mass index (BMI), and waist circumference (WC). Periodontal status was evaluated by community periodontal index (CPI). Data were analyzed using SPSS 18.0 program. Results: The prevalence of periodontal diseases was higher in male, older aged people, undereducated people, current smokers, and those having poor cognition for toothbrushing (p<0.001). The rate of obesity by BMI and WC was higher in male, older aged people and current smokers. The rate of obesity was lower in well-educated people and good practice of toothbrushing (p<0.001). The prevalence of periodontal diseases by BMI showed 0.565 times lower in underweight population, 1.302 times higher in overweight population, and 1.311 times higher in highly obese population than normal population. The prevalence of periodontal diseases by waist circumferences showed 1.404 times higher in obese population than the normal population (p<0.05). Conclusions: It is very important to promote periodontal disease prevention and education for obese population in Korea. The risk of periodontal diseases can be preventable by decrease of BMI and WC.

• 한국의류학회지
• /
• 제11권2호
• /
• pp.23-36
• /
• 1987

The purpose of the suudy was to develop a computer program for pattern mating of women's pant's. Computerization of the pattern making process was expected to provide higher accuracy and efficiency in pattern mating. The VAX-11/750 Computer and the CALCOMP PLOTTER 965 were used in this study. The procedures of the study were as follows : 1. A slacks pattern was selected. 2. The co-ordinate points were indicated relative location of all necessary in draffing. Total sixty co-ordinate points were instituted from (AX(1), AY(1)) to (AX(24), AY(24)), from (BX(1), BY(1)) to (BX(36), BY(36)). 3. A program for drafting was developed. Refer to (Table 3). 4. The procedures of drading of standard size were accomplished by using same method. The program was developed to drafting pattern for women by putting indivisual body measurement. The body measurements for stacks pattern were as follows : slacks length. Croach length. Hip length. nip circumference. waist circumference.

• 한국의류학회지
• /
• 제41권4호
• /
• pp.646-660
• /
• 2017

This study provides basic data to develop a brassiere pattern that can cover the big breast of breast enlargement patients. In this study, we also showed areas of the brassiere cup pattern and the body surface of the breast on a breast enlargement patient. The results of the study are as follows. Correlation analysis was obtained between volume and body surface area and breast detail dimensions. After the correction process, we proposed a research bra pattern for breast augmentation patients. The cup-boundary in bra patterns of breast enlargement surgery patients is longer than the bra patterns of the general breast; therefore, the height of the inner and outer edges of the upper cups is higher. Also, it is necessary to set the new breast upper point when measuring the upper length in patients with breast augmentation surgery because the points of circumference of the breast are marked higher than chest circumference.

• 한방비만학회지
• /
• 제15권2호
• /
• pp.137-143
• /
• 2015

The purpose of this study is to investigate the clinical studies of cupping therapy for obesity in Traditional Chinese Medicine (TCM) and to evaluate the effects of it for use in practice. CNKI were searched for controlled studies on cupping therapy for obesity that were published up to September 2015. The review included 9 randomized controlled trials, and we analyzed the objectives, process of interventions, outcome measurements, and main results of the studies. We found that cupping therapy combined with acupuncture, electric acupuncture or thread embedding have more effectively decreased body mass index, waist circumference and lipid profile than acupuncture, electric acupuncture or thread embedding only have done. In the reviewed studies, cupping therapy treated in the region of abdomen, upper and lower limbs, and dorsal part operating on 5 to 25 minutes for one time with total 6 to 45 times of schedule. In this study, we demonstrated that cupping therapy combined with acupuncture, electric acupuncture or thread embedding could have effectively used for treating obesity. Further evaluation and clinical researches are required to establish evidence in practice.

• 한국의류학회지
• /
• 제6권2호
• /
• pp.57-67
• /
• 1982

The purpose of this study was to improve the clothing life of the children between the nine to twelve by making a scientific and rational basic bodice pattern. The comparison of the eight pattern drafting currently used in Korea was referred in order to make new basic pattern. Three hundred fifty-two subjects from 9 to 12 years old in Seoul area were measured on 19 items. The measurements (24 items including 19 measured items and 5 drafted items that were difficult to measure) were analyzed by mean values and correlation coefficients between each item. This new pattern attempted to set the ease for clothing from experiments of the changes of body surface in motion. On the basis of the above results, a new bodice basic pattern was developed and tested with wearing three times. Through the experiments in measuring the changes of the body surface in motion, it was concluded that it desirable to set a standard of 12cm clothing ease on the bust circumference and 4cm on the waist circumference. The correlation coefficient of the tack width to across back was relatively high (r= .677), therefore, the latter measuring items were eliminated. A grading method was adopted to determine the width and depth of neckline and shoulder slope.

• 보건의료산업학회지
• /
• 제13권2호
• /
• pp.81-92
• /
• 2019

Objectives: The purpose of this study was to discuss the overall and oral health conditions that affect obesity in middle-aged women in Jeju and to help them operate the effective obesity program in the future. Methods: Participants of this study were 171 middle-aged women living in Seogwipo City, Jeju Special Self - Governing Province. Data were collected through the convenience sampling method. Body mass index and waist circumference of each participant were measured, and a self-report questionnaire was applied. Results: The overall health status of obesity comprised depression, stress, diabetes, and menopause. The oral health conditions affecting obesity were bad breath and chewing. Hypertension was the main factor affecting body mass index and depression was the main factor influencing waist circumference. Obesity was more influenced by overall health status factors than by oral health status factors. Conclusions: The results of this study are expected to be useful as basic data for efficient health care services in the prevention of obesity.

• 대한물리의학회지
• /
• 제18권3호
• /
• pp.11-19
• /
• 2023

PURPOSE: This study evaluated the incidence of sarcopenic obesity (SO) and examined the specific risk factors in a community-dwelling middle-aged population of women. METHODS: The present study involved analyzing data from a cross-sectional study that included 1,693 community-dwelling women aged between 40 and 49 years. Various risk factors were investigated, including age, height, weight, body mass index, waist circumference, skeletal muscle mass index, smoking and drinking behaviors, systolic and diastolic blood pressure, fasting glucose levels, as well as triglyceride and cholesterol levels. To ensure the accuracy and validity of the results, a complex sampling technique was employed for data analysis. Each sample weight was calculated through a three-step process by estimating base weight, adjusting it for non-response, and modulating it for post-stratification. RESULTS: The incidence of SO was 4.26% (95% CI: 3.20-5.67%). The clinical risk factors for SO were age, height, weight, body mass index, waist circumference, skeletal muscle mass index, systolic blood pressure, diastolic blood pressure, and levels of fasting glucose, triglycerides, and total cholesterol (p < .05). CONCLUSION: This study explores the prevalence and risk factors of SO among community-dwelling women. It adds to the existing literature on SO and identifies potential risk factors in middle-aged women.

• 대한물리의학회지
• /
• 제18권3호
• /
• pp.1-9
• /
• 2023

PURPOSE: This study examined the prevalence and specific risk factors in males aged 40-49 years with the coexistence of age-related loss of skeletal muscle mass and obesity (CALSMO). METHODS: The current study analyzed the data obtained from a cross-sectional study involving a sample of 1,218 men who resided in the community and fell within the age range of 40 to 49 years. Multiple risk factors were examined: age, height, weight, body mass index, waist circumference, skeletal muscle mass index, smoking and drinking habits, systolic and diastolic blood pressure, fasting glucose levels, and triglyceride and cholesterol levels. All data were analyzed via complex sampling analysis. RESULTS: The coexistence of age-related loss of skeletal muscle mass and obesity in males was 2.94% (95% CI: 2.06-4.17). The clinical risk factors were low height, high weight, body mass index, waist circumference, skeletal muscle index, systolic blood pressure, diastolic blood pressure, and fast glucose (p < .05). CONCLUSION: The study identifies the prevalence and risk factors for CALSMO among adults in the community. These findings contribute to the existing literature on CALSMO and highlight potential risk factors associated with CALSMO development in males aged 40-49 years.

• 한국의류학회지
• /
• 제47권1호
• /
• pp.123-136
• /
• 2023

To develop smart sportswear capable of measuring biometric data, we created a close-fitting pattern using two- and three-dimensional (2D and 3D, respectively) methods. After 3D virtual fitting, the tightness of each pattern was evaluated using image processing of contact points, mesh deviation, and cross-sectional shapes. In contact-point analysis, the 3D pattern showed high rates of contact with the body (84.6% and 93.1% for shirts and pants, respectively). Compared with the 2D pattern, the 3D pattern demonstrated closer contact at the lower chest, upper arm, and thigh regions, where electrocardiography and electromyography were primarily carried out. The overall average gap was also lower in the 3D pattern (5.27 and 4.66 mm in shirts and pants, respectively). In the underbust, waist, thigh circumference, and mid-thigh circumference, the cross-section distance between clothing and body was showed a statistically significant difference and evenly distributed in the 3D pattern, exhibiting more closeness. The tightness and fit of the 3D smart sportswear sensor pattern were successfully evaluated. We believe that this study is critical, as it facilitates the comparison of different patterns through visualization and digitization through 3D virtual fitting.