• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.415-418
• /
• 2007

This paper presents the design and analysis of LNA-Mixer for 2.45GHz RFID reader. The LNA is implemented by PCSNIM method for low power consumption. The Mixer is implemented by using the Gilbert-type configuration, current bleeding technique, and the resonating technique for the tail capacitance. The connection between the two designed circuits is made by active balun. This LNA-Mixer has about 35dB for -40dBm input RF power, LO power is 0dBm and RF frequency is 2.45 GHz and IIP3 is -4dBm. The layout of LNA-Mixer for one-chip design in a $0.18-{\mu}m$ TSMC process has 2.6mm ${\times}$ 1.3mm size.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.1
• /
• pp.30-35
• /
• 1997

A rapid and sensitive detection of BmNPV contamination in silkworm rearing room was carried by Plymerase chain reaction(PCR). Silkworm nuclear polyhedra were dissolved for the extraction of viral DNA within 30 minutes followed by the treatment of alkaline solution. The combination of primers of NP3 and NP2 was superior in PCR to the other 7 primers applied. Each primer was designed with 20 base in size and Newly designed NP3 of sense and the already reported NP2 for antisense were better in reaction than other primers. PCR products appeared 500bp in size. And annealing was confirmed proper at 55$^{\circ}C$ condition. Amplifiable template DNA amount was confirmed at least 100 ng to 0.1 ng and regarded as applicative for the assay of silkworm rearing environmental condition of sericultural farm. In case of the detection of BmNPV from the dust, sensitivity by PCR was as high as 1,000,000 times than that of microscopic observation.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.82-86
• /
• 2010

In this paper, a power amplifier module for WCDMA base-station applications is designed and implemented using GaN field-effect transistors (FETs), which uses an envelope tracking bias system. The designed module consists of an high gain MMIC amplifier, a driver amplifier, a power amplifier, and bias circuits for envelope tracking applications. Especially, a FET bias sequencing circuit and two isolators are integrated for stable RF operations. All circuits are assembled within a single housing, so its dimension is just $17.8{\times}9.8{\times}2.0\;cm3$. Measured results show that the developed power amplifier module has good envelope tracking capability: the power-added efficiency of 35% at the output power range from 30dBm to 40dBm over a wide range of drain bias.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.966-974
• /
• 2019

In this study, we propose a CMOS power amplifier (PA) using a bypass technique to enhance the efficiency in the low-power region. For the bypass structure, the common-gate (CG) transistor of the cascode structure of the driver stage is divided in two parallel branches. One of the CG transistors is designed to drive the power stage for high-power mode. The other CG transistor is designed to bypass the power stage for low-power mode. Owing to a turning-off of the power stage, the power consumption is decreased in low-power mode. The measured maximum output power is 20.35 dBm with a power added efficiency of 12.10%. At a measured output power of 11.52 dBm, the PAE is improved from 1.90% to 7.00% by bypassing the power stage. Based on the measurement results, we verified the functionality of the proposed bypass structure.

• Journal of Advanced Navigation Technology
• /
• v.28 no.1
• /
• pp.116-122
• /
• 2024

In this paper, course structure and course width were studied among the main performances of the system to derive the required performance of the modulation index, output power, and phase change specifications of the instrument landing system (ILS) localizer power amplifier. To satisfy the course structure's deviation standard (± 5 uA), the difference in depth of modulation (DDM) deviation standard of the carrier with sideband (CSB) amplifier was standardized to ± 1 uA(0.001 DDM). CSB 30 W power amplifier was designed, and through the modulation compensation circuit, sum in depth of modulation (SDM) is 40% ± 0.1% and DDM is ± 0.0005 DDM in the operating output range(45 dBm ~ 35 dBm). In addition, the course width and displacement sensitivity specifications were analyzed through simulation, and the ± 0.1° change applied during comissioning inspection, which is the most stringent standard, was applied. The output variation of the suppressed with sideband only ( SBO) amplifier was ± 2 mW or less, The phase was standardized to within ± 3 ° and the characteristics were satisfied. By applying a compensation circuit according to output power and temperature, stable modulation index, output, and phase characteristics were obtained.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.141-142
• /
• 2006

본 논문에서는 단일 FET를 이용하여 900MHz/2.14GHz 이중 대역 고효율 도허티 전력증폭기 설계 구현을 하였다. 이중대역 도허티 전격증폭기의 출력전력은 900MHz 에서 35.91dBm, 2.14GHz에서 35.91 dBm의 출력을 얻었으며, 전력부가효율은 900MHz에서 40.32%, 2.14GHz에서는 40.47%의 효율을 획득 하였다. 또한 본 논문에서 단 하나의 능등소자를 이용하여 최대한의 출력전력을 얻기 위하여 최대 전력정합법을 사용하였으며 그 결과 이중대역 전력증폭기를 구현할 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.356-359
• /
• 2006

A monolithic SiGe HBT variable gain driver amplifier(VGDA) with high dB-linear gain control and high linearity has been developed as a driver amplifier with ground-shielded microstrip lines for 5-GHz transmitters. The VGDA consists of three blocks such as the cascode gain-control stage, fixed-gain output stage, and voltage control block. The circuit elements were optimized by using the Agilent Technologies' ADSs. The VGDA was implemented in STMicroelectronics' 0.35${\mu}m$ Si-BiCMOS process. The VGDA exhibits a dynamic gain control range of 34 dB with the control voltage range from 0 to 2.3 V in 5.15-5.35 GHz band. At 5.15 GHz, maximum gain and attenuation are 10.5 dB and -23.6 dB, respectively. The amplifier also produces a 1-dB gain-compression output power of -3 dBm and output third-order intercept point of 7.5 dBm. Input/output voltage standing wave ratios of the VGDA keep low and constant despite change in the gain-control voltage.

• Journal of electromagnetic engineering and science
• /
• v.10 no.1
• /
• pp.6-12
• /
• 2010

In this paper, highly efficient class-F power amplifiers(PAs) with harmonic-controlling transmission lines(TLs) were built for cellular and WLAN applications at 840 MHz and 2.4 GHz each. Also, based on these single-band PAs, a dualband class-F PA was designed after a careful investigation into the harmonics of the two frequencies. The harmonic-controlling TL was designed for the class-F operation at dualband by switching the length of the shunt $\lambda$/4 TL part, while the series $\lambda$/4 TL is optimized for both frequencies. To verify the performance, two class-F PAs optimized at each frequency and a dualband class-F PA at the corresponding frequencies were built with the secondand the third-harmonic control circuits at each frequencies. As a result, the PA#1 at 840 MHz has a peak drain efficiency of 81.2 % with an output power of 24.4 dBm, while the PA#2 at 2.35 GHz shows a drain efficiency of 94.5 % with an output of 22.8 dBm. Finally, the dualband class-F PA#3 showed 60.5 % and 50.9 % drain efficiencies at 840 MHz and 2.4 GHz, with powers of 23.8 dBm and 19.62 dBm, respectively.

• YAKHAK HOEJI
• /
• v.50 no.3
• /
• pp.160-165
• /
• 2006

Germanium is found in a range of minerals and ores and is present in foods including beans, tomato juice, oysters, tuna and garlic. Germanium is a non-metallic element, which can exist in valence states of 2 and 4. Clinical trials and use in private practices for more than a decade have demonstrated organic germanium's efficacy in treating serious disease including cancer, arthritis and senile osteoporosis. But it was rarely reported that inorganic germanium has biological properties. STB-BM contains mineral complex, rare earth elements and a little amount of Inorganic germanium. The experiment was carried out the anti-obesity effect. To investigate anti-obesity effect of STB-BM, we measured the effect of body weight, fat weight (subcutaneous fat, epididymal fat, visceral fat, kidney fat and total fat) and serum biochemical level in rats fed high fat diets. STB-BM 35 mg/kg suppressed the increasing ratio of body weight, epididymal fat weight, visceral fat weight, total fat weight, triglyceride and LDL-cholesterol (p<0.05).

• Korean journal of applied entomology
• /
• v.35 no.4
• /
• pp.321-325
• /
• 1996

To isolate a novel gene for antibacterial peptide, an inducible clone(BmInc8) was selected by differential screening strategy from Bombyx mori cDNA library prepared from lavae injected with Escherichia coli. This clone contained a cDNA insert of 564 nucleotides and encoded 59 amino acids with an apparent molecular mass of 6.3 kDa. The cDNA sequence of BmInc8 had 61.2% identity compared to that of the bactericidin from Manduca sexta and also the deduced amino acids sequences from this insert had 65% identity compared to that of the cecropin D peptide Hyalophora cecropia. The transient expression assay of this insert using prokaryotic expression vector system revealed that the expressed peptide displayed the antibacterial activity. The cDNA sequence was deposited in GenBank under the accession number U30289.