• Journal of Korean Neurosurgical Society
• /
• v.44 no.2
• /
• pp.63-66
• /
• 2008

Objective : The purpose of this study is to investigate the correlation between various transcranial Doppler (TCD) ultrasonography parameters and clinical vasospasm after aneurysmal subarachnoid hemorrhage (SAH). Methods : This study enrolled 40 patients presented with aneurysmal SAH between September 2006 and August 2007. We measured differences of mean blood flow velocity (BFVm), highest systolic blood flow velocity (BFVh), and Lindegaard ratio (LR) in the middle cerebral artery on TCD examination. These parameters were evaluated for correlation with clinical vasospasm by univariate analysis and the receiver operating characteristic analysis. Results : Twelve patients (30%) developed clinical vasospasm. The best TCD parameters for the detection of clinical vasospasm were revealed to be differences of BFVm, BFVh, and LR values between $1^{st}$ TCD test and $3^{rd}$ TCD (7 cm/s. 11.5 cm/s, 0.45 respectively). The positive predictive value of anyone of three parameters was 60% and the negative predictive value was 100%. Conclusion : TCD is still considered a useful tool for screening clinical vasospasm. To confirm the predictive value of the above parameters. further prospective study will be needed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.11
• /
• pp.1585-1596
• /
• 2002

The objectives of the present study are to numerically and experimentally investigate the steady and pulsatile flow phenomena in the circular tubes, to quantitatively compare the flow characteristics of Newtonian and non-Newtonian fluids, and to find meaningful hemodynamic information through the flow analysis in the human blood vessels. The particle image velocimetry is adopted to visualize the flow fields in the circular tube. and the results from the particle image velocimetry are used to validate the results of the numerical analysis. In order to investigate the blood flow phenomena in the circular tube. constitutive equations, which are suitable to describe the rheological properties of the non-Newtonian fluids. are determined, and the steady and pulsatile momentum equations are solved by the finite volume prediction. The velocity vectors of the steady and pulsatile flow in the circular tube obtained by the particle image velocimetry arc in good agreement with those by the numerical analysis. For the given mass flow rate. the axial velocity profiles of the Newtonian and the non-Newtonian fluids appear differently. The pulsatile flow phenomena of the Newtonian and the non-Newtonian fluids are quite different from those of the steady flow.

• Journal of Biomedical Engineering Research
• /
• v.11 no.1
• /
• pp.147-156
• /
• 1990

A two-dimensional pulsed doppler system for ultrasonic blood velocity doppler signals is studied and implemented. The second-order sampling method and serial data processing procedures are utillized in the sys- tem, which eliminates the untuning problems at phase channels in the quadrature detection method as well as in the channels of parallel data processing. rho digital signal processor used in this system allows a hardware savings and flexible design options. The efficiency of the various mean frequency estimators in the second-order sampling system is examined by computer simulation as a function of the intersequence sample delay time. The temporal delay for the quadrature component is changed from $1/(4f_o){\;}to{\;}3/(4f_o){\;}and{\;}5/(4f_o)$ where to is the center frequency of the transducer, It is found that autocorrelator is the optimum frequency estimator for the second-order sampling: with !he intersequence sample delay of $1/(4f_o){\;}to{\;}3/(4f_o){\;}and{\;}5/(4f_o)$. The qualitative variation and information proportional to blood velocity in the vessel system are obtained in the VIVO experiments.

• Annals of Clinical Neurophysiology
• /
• v.1 no.1
• /
• pp.26-30
• /
• 1999

Background : The origin of P300 was still on debate nbut thought to be in the frontal, temporal or parietal lobe. As the transcranial doppler ultrasonography(TCD) gives us and opportunity to observe hemodynamic chaged dynamically and the middle cerebral artery feeds these ares of the hemisphere, we observed the change of mean flow velocity of MCA during the event related potential test(ERP) to determine the role of these structures in P300 generation. Method : Twenty normal subjects(male : 13, age : 24-29 years) performed ERP. An auditory oddball pardigm was used to elicit the ERPs. TCD examination was performed with 2-MHz probe monitoring the left MCA(Transscan, EME). After signal identification and adjustments to maximize the Doppler signal strength, the probe was mechanically locked during the monitoring. The changes of blood flow velocity of the left middle cerebral artery(MCA) induced by cognitive demands were monitored. The measurement of the meal flow velocities(MFV) of MCA were made while the subjects were prior to, during, and after ERP. We recorded the MFVs during ERP. Statistical analysis was performed using t-tests with SPSS-PC for windows release 6.0. Results : All subjects showed a relative increase in MFV of MCA during the task. The mean rise was about 3.2-4.2%(p <0.05). Although TCD does not measure absolute values of regional cerebral blood flow(rCBF) or absolute rCBF changes, changes of flow velocity can reflect relative rCBF changes. Conclusions : The generation site of P300 still remains unclear but the neocortical, thalamic and limbic region and temporal-parietal cortex have been proposed. The MCA supplies these anatomical structures. The Changes of flow veolocity of MCA during the ERP test suggest that the some part of the brain fed y the MCA activate of the temporal lobe or parietal lobes, we can deduce that some parts of brain fed by the MCA participate in the generation of P300.

• Journal of Oral Medicine and Pain
• /
• v.34 no.1
• /
• pp.115-122
• /
• 2009

The following results were obtained, after experimenting on change of masseter muscle and bloodstream epithelium with Transcutaneous Electrical Nerve Stimulator(TENS), among 16 male adults. 1. According to applying TENS, it was observed that bloodstream in muscle increases at 1.5, 3.0 Hz. 2. According to applying TENS, it was observed that concentration of moving blood cells in muscle increase at 1.5, 3.0, 6.0 Hz. 3. According to applying TENS, it was observed that velocity of bloodstream in muscle increases only at 1.5 Hz 4. Through experiment, applying TENS at level of 6.0 and 10.0 Hz, all bloodstream, concentration of moving blood cells, and velocity of bloodstream increasing rates were lower in muscle compared to of them in overlying epithelium; and especially increasing bloodstream and its velocity were most frequent at 6.0 Hz, and bloodstream of 10.0 Hz. From the results above when a physical therapy of TENS is carried out the frequency of 1.5, 3.0 H is effective, and as the frequency increases it is disadvantageous to the muscle.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.209-215
• /
• 2019

The most important personal health care in digital health care is a very important issue mainly for chronic diseases. Therefore, it is important to develop a simple wearable device for real-time health management. Existing blood pressure estimation wearable devices use PPG characteristics to analyze PTT and propose blood pressure estimation algorithms. However, the influencing factors of the algorithm such as the reproducibility of PPG, whether to apply various PTTs, and variables generated from the physical differences of the measurers are actually very complex. Therefore, in this study, the correlation between PTT, SBP, and DBP was analyzed, and it was designed to use PPG sensors for device miniaturization. The blood pressure estimation algorithm took into account differences in PPG, heart rate, and personal variables.

• Journal of Yeungnam Medical Science
• /
• v.8 no.1
• /
• pp.63-71
• /
• 1991

Noninvasive techniques for antenatal detection of the fetal development and well-being such as biophysical profile, non-stress and stress test remain major challenges in modem obstetric practice. To obtain and analyze umbilical artery velocity waveform by pulsed-wave doppler ultrasound, a total of 160 determinations were carried out on 157 normal pregnant women between 16th to 41st week gestation. The ratio of peak systolic to end-diastolic flow velocity(S/D ratio), pulsatility index and resistance index were measured as indices of the resistance in feto-placental circulation. The results were as follows : As gestation advances, the, mean values for peak systolic and end-diastolic velocities raised progressively. As gestation advances, the mean values for the S/D ratio declined progressively, exhibiting high diastolic flow velocity caused by low resistance. Pulsatility index, and resistance index were also declined progressively, as gestation advances. The analysis of umbilical artery blood flow velocity waveforms provides a new noninvasive technique to evaluate fetal development and well-being, and may be expected a reliable method for assessment of fetal life.

• Journal of Mechanical Science and Technology
• /
• v.20 no.8
• /
• pp.1118-1124
• /
• 2006

Recently, cavitation on the surface of mechanical heart valve has been studied as a cause of fractures occurring in implanted Mechanical Heart Valves (MHVs). It has been conceived that the MHVs mounted in an artificial heart close much faster than in vivo sue, resulting in cavitation bubbles formation. In this study, six different kinds of mono leaflet and bileaflet valves were mounted in the mitral position in an Electro-Hydraulic Total Artificial Heart (EHTAH), and we investigated the mechanisms for MHV cavitation. The valve closing velocity and a high speed video camera were employed to investigate the mechanism for MHV cavitation. The closing velocity of the bileaflet valves was slower than that of the mono leaflet valves. Cavitation bubbles were concentrated on the edge of the valve stop and along the leaflet tip. It was established that squeeze flow holds the key to MHV cavitation in our study. Cavitation intensity increased with an increase in the valve closing velocity and the valve stop area. With regard to squeeze flow, the bileaflet valve with slow valve-closing velocity and small valve stop areas is better able to prevent blood cell damage than the monoleaflet valves.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.271-284
• /
• 2004

The purpose of this study was to analyse the EMG activity of selected muscles with balance taping treatment and blood fatigue makers which accumulated during exercise of progressive maximal intensity. Ten male college students who did not experience any cardiovascular and musculo-skeletal disease were participated in this study. Balance taping were applied to rectus femoris, vastus medialis, vastus lateralis, biceps femoris, semitendinous, semimembranous, and around knee joint. Isokinetic knee joint flexion/extension force, EMG activity, lactate and ammonia as blood fatigue makers during progressive maximal intensity exercise were measured for with/without applying balance taping. The results indicated that although flexion force of total work at $60^{\circ}/sec$ with taping was increased applied taping did not affect to the aerobic exercise ability parameters. Lactate level as blood fatigue makers during progressive maximal intensity exercise after taping was decreased but the ammonia level did not change with same treatment. In isokinetic knee joint test at the angular velocity of $60^{\circ}/sec$, $180^{\circ}/sec$, and $240^{\circ}/sec$ the taping treatment did not affect to any selected muscle EMG activities except maximal EMG of vastus lateralis at $240^{\circ}/sec$.

• Journal of Mechanical Science and Technology
• /
• v.15 no.5
• /
• pp.613-622
• /
• 2001

Interaction of blood flow and leaflet behavior in a bileaflet mechanical heart valve was investigated using computational analysis. Blood flows of a Newtonian fluid and a non-Newtonian fluid with Carreau model were modeled as pulsatile, laminar, and incompressible. A finite volume computational fluid dynamics code and a finite element structure dynamics code were used concurrently to solve the flow and structure equations, respectively, where the two equations were strongly coupled. Physiologic ventricular and aortic pressure waveforms were used as flow boundary conditions. Flow fields, leaflet behaviors, and shear stresses with time were obtained for Newtonian and non-Newtonian fluid cases. At the fully opened phase three jets through the leaflets were found and large vortices were present in the sinus area. At the very final stage of the closing phase, the angular velocity of the leaflet was enormously large. Large shear stress was found on leaflet tips and in the orifice region between two leaflets at the final stage of closing phase. This method using fluid-structure interaction turned out to be a useful tool to analyze the different designs of existing and future bileaflet valves.