• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.9
• /
• pp.499-505
• /
• 2013

R744 has been appropriated for substitute refrigerant, because of its high stability, and environment-friendly nature as a natural refrigerant. To analyze the cooling performance of a refrigeration system in a refrigerator truck using R744 according to the blocking ratio, an analytical model of the refrigeration system was developed under frost conditions, using EES. The performance of the refrigeration system was predicted with the indoor and outdoor air temperature, outdoor air velocity, and compressor speed. As a result, the system performance decreased, with the increase of frost growth. When the blocking ratio was 40.4% in the basic condition, the refrigeration capacity was decreased by 27.1%, compared to the non-frost condition.

• The KIPS Transactions:PartC
• /
• v.10C no.4
• /
• pp.485-492
• /
• 2003

This paper presents a new modified input buffered switch, which called a grouped input buffered (GIB) switch, to eliminate the influence of HOL blocking when using multiple input buffers in ATM switches. The GIB switch consists of grouped sub switches per a network stage. The switch gives extra paths and buffered switching elements between groups for transferring the blocked cells. As the result, the proposed model can reduce the effect by the HOL blocking and thereafter it enhances the performance of the switch. The simulation results show that the proposed scheme has good performance in comparison with previous works by using the parameters such as throughput, cell loss, delay and system power.

• Journal of Broadcast Engineering
• /
• v.10 no.3
• /
• pp.383-391
• /
• 2005

In this paper, a new anisotropic diffusion based on Alvarez, Lions, and Morel (ALM) diffusion model is proposed for the suppression of blocking artifact caused by discrete cosine transform (DCT) based image compression. The proposed diffusion model, which incorporates a 'rate control parameter' (RCP), makes it possible to reduce blocking artifacts while to preserve the edge. The RCP controls the rate between isotropic and anisotropic diffusion. Isotropic diffusion is encouraged to eliminate the blocking artifacts in a block boundary of a smooth region, while anisotropic diffusion is encouraged to keep the edge or texture sharp in edge and a block boundary within an edge region. Additionally, to avoid oversmoothness of the texture region, a 'speed control parameter' (SCP), which makes diffusion process slow in the texture region, is employed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.8
• /
• pp.31-38
• /
• 1995

In this paper, we consider the leaky bucket parameter dimensioning problem in the presence of the cell delay variation(CDV) which arises at the customer premises network dud to the multiplexing with other traffic streams. We consider an ATM multiplexer in which a single CBR stream and several heterogeneous VBR traffic streams are multiplexed. Choosing an MMPP model for the bursty traffic streams, we derive an (MMPP+DD)/D/1/K queueing model for the evaluation of the CDV experienced by the CBR stream. We first evaluate the equilibrium queue length distribution embedded at tagged-cell arrival-time instants, based on whcih we calcuate the inter-cell time distribution and the distribution kof the number of tagged-cell departures in an arbitrary interval. Then we apply the analysis to the dimensionging problem of the leaky bucket parameters, examining how the employed traffic model affects the determination of the bucket size. Through numerical examples, we confirm that the Poisson traffic model can underestimate the bucket size, thus causing a considerable blocking probability for compliant use cells while the MMPP model can optimally design the bucket size which keeps the blocking probability under the target value.

• Journal of Korean Port Research
• /
• v.10 no.1
• /
• pp.53-61
• /
• 1996

This paper describes the effect of wave control using submerged flat plate by the numerical calculation and the hydraulic model test. The boundary element method is used to develop a numerical solution for the flow field caused by monochromatic oblique waves incident upon an infinitely long, sumerged flat plate situated in arbitrary water depth. The effect of wave blocking is examined according to the change of length, submerged depth of flat plate and incident angles. Numerical results show that longer length, shallower submergence of flat plate and larger incident angles enhance the effect of wave blocking. To validate numerical analysis method, hydraulic model test was conducted in 2-D wave flume with 60 cm metal sheet. Reflected waves are extracted from water surface elevation in front of the location of a submerged plate by least square method with 3 wave gages. From comparing experimental results with numerical results, efficiency of numerical analysis method by this study could be confirmed well within wide ranges of wave frequencies.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.36 no.3
• /
• pp.45-59
• /
• 2011

OFDMA systems have been expected to be widely used to provide multimedia services over wireless channels. To evaluate performance of the OFDMA system, power should be considered as system resource as well as subcarriers. This study propose a queueing traffic model incorporating two kinds of resources (power and subcarriers), and an extended model giving a priority to handoff calls over new calls. Some extensive experiments are conducted to illustrate the usefulness of the proposed traffic model.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.2
• /
• pp.113-121
• /
• 2010

Recently, as container ships become larger and faster, rudder cavitations are more frequently observed near the gap between the horn and rudder plates of the ships to cause serious damages to the rudder surface of the ship. The authors already have suggested through a series of model experiments and numerical computations that employment of an appropriate blocking device for gap flow may retard the gap cavitation. For examples, a cam device installed near the outer edges of the vertical gap or a water-injection device combined with a pair of half-round bars installed inside the gap can considerably reduce the gap cavitation. However, it is also found that effective blocking of the flow through the vertical gap results in growth of the cavitation near the horizontal gap instead. In the present study, effectiveness of the simultaneous blocking of the flow through the horizontal and vertical gaps of a horn type rudder in minimizing the damage by gap cavitation is studied. Additional blocking disks are inserted inside the horizontal gaps on the top and bottom of the pintle block and numerical computations are carried out to confirm the combined effect of the blocking devices.

• Journal of the Korea Society for Simulation
• /
• v.28 no.3
• /
• pp.65-74
• /
• 2019

For many years, it has been widely studied on fork-join production systems but there is not much literature focusing on the finite buffer(s) of either individuals or shared, and generally distributed processing times. Usually, it is difficult to handle finite buffer(s) through a standard queueing theoretical approach. In this study, by using the max-plus algebraic approach we studied buffer-shared fork-join production systems with general processing times. However, because it cannot provide proper computational ways for performance measures, we developed simulation models using @RISK software and the expressions derived from max-plus algebra. From the simulation experiments, we compared some properties on waiting time with respect to a buffer capacity under two blocking policies: BBS (Blocking Before Service) and BAS (Blocking After Service).

• Journal of the Korea Society of Computer and Information
• /
• v.1 no.1
• /
• pp.25-36
• /
• 1996

We have analyzed the reliability of failure models In grid topology circuit switched networks. These models are grid topology circuit_ switched networks. and each node transmits packets to object node using flooding search routing method. We hypothesized that the failure of each link Is Independent. We have analyzed for the performance estimation of failure models It using joint probability method to the reliability of a small grid topology circuit switched network. and compared analytic output with simulated output. Also. We have evaluated the reliability of networks using call blocking Probability occurred in circuit switched networks.

• Journal of Convergence for Information Technology
• /
• v.7 no.6
• /
• pp.113-121
• /
• 2017

Due to the development of IT technology, harmful multimedia contents are spreading out. In addition, obscene and violent contents have a negative impact on children. Therefore, in this paper, we propose a multimodal approach for blocking obscene and violent video contents. Within this approach, there are two modules each detects obsceneness and violence. In the obsceneness module, there is a model that detects obsceneness based on adult and racy score. In the violence module, there are two models for detecting violence: one is the blood detection model using RGB region and the other is motion extraction model for observation that violent actions have larger magnitude and direction change. Through result of these three models, this approach judges whether or not the content is harmful. This can contribute to the blocking obscene and violent contents that are distributed indiscriminately.