• 한국의류학회지
• /
• 제29권6호
• /
• pp.745-752
• /
• 2005

Green tea has various medical effects. It was selected as new natural dyes guessing the effects of the biological activities are still appeared on dyeing. It was examined whether they have the function of Uv-blocker or not. Cotton, linen & Hanji were dyed with Green tea. Al, Cr, Cu, Fe and Sn were selected as the mordant and the UV blocking rate of dyed samples was measured. The results of this study as follows; 1 . The color of dyed samples with Green tea changed yellowish red except Hanji and linen mordanted with Fe. 2. K/S values of dyed samples with Green tea increased by the number of dyeing treatment(p<.01). 3. UVA and UVB blocking rate increased by the number of dyes. Cotton and Linen could block the UV radiation over $93\%$ and Hanji could block over $95\%$ after three times of dyeing. These results suggest that Hanji has possibility far various practical uses of clothing material in beautiful and functional aspect. It could have the biological effects when we put on dyed clothing material with Green tea.

• 대한화장품학회지
• /
• 제46권4호
• /
• pp.383-390
• /
• 2020

블루라이트는 380 ~ 450 nm 사이의 파장에 존재하는 파란색 계열의 빛으로 활성산소를 유발하여 노화를 불러일으키는 것으로 보고되었으며, 이에 따라 블루라이트 차단 효과에 대한 관심이 높아지고 있다. 본 연구에서는 자외선 차단제품에서 오일의 극성도, 제형의 점도, 유화제의 종류, 유화입자, 무기자외선 차단제 등이 블루라이트 차단 효과에 미치는 영향에 대해 조사해 보았다. 그 결과 오일의 극성도가 유기자외선차단제의 극성과 유사해질수록 블루라이트 차단율이 높아지는 것으로 확인되었으며, 제형의 점도가 증가할수록 높은 블루라이트 차단율을 나타냈다. 유화제의 종류 및 유화 입자는 블루라이트 차단 효과에 미치는 영향이 미비하였고, 무기자외선 차단제 함유 여부가 블루라이트 차단율에 큰 영향을 주는 인자 중 하나로 나타났다. 이러한 결과들은 블루라이트 차단 효율을 효과적으로 높일 수 있으며, 앞으로 블루라이트 차단 제품 개발 및 제형 연구에 활용될 수 있을 것이다.

• 대한조선학회논문집
• /
• 제46권5호
• /
• pp.460-470
• /
• 2009

In recent practice a half round prismatic bar has fillet welded or formed through foundry work along the centerline on rear concave surface of the horn to mitigate gap flow between fixed and movable part of the rudder system. When the gap clearance has been blocked with this practice, numerical simulations indicate that the practices are not only effective in reducing the gap flow but also in mitigating the cavitation. The blocking effects are remarkably improved when a pair of blocking bar is bisymmetrically attached with respect to centerline on the opposite convex surface of the movable part. The blocking bar could be placed on the exposed surface under maximum rudder angle. This implies that the blocking bar could be easily adopted not only in a design stage but also in a maintenance stage for mitigating rudder cavitation. In addition, the numerical simulations imply that more improvements could be anticipated through the selection of section shape of prismatic bar for gap flow blocking.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1996년도 학술대회
• /
• pp.233-236
• /
• 1996

A new method of blocking effects reduction is proposed in this paper for use in low bitrate image coding. We use 28 DCT kernel functions of which boundary values are linearly independent, and Gram-Schmidt process is applied to the boundary values in order to obtain 28 boundary-orthonormal basis images. Then we use these basis images to obtain the correction terms for blocking artifacts reduction. A threshold of block discontinuity is introduced for improvement of visual quality by reducing image blurring. We also investigate the number of basis images needed for efficient blocking artifacts reduction when the compression ratio changes.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.1996-1999
• /
• 2003

Stereo matching is an important technique in the are of computer vision. There are already many theorems to find disparity map using stereo images. Usually, disparity is searched by using block matching. However block matching result in blocking effects caused by using fixed size window for computing pixel correlations. This paper suggests an efficient method to remove the blocking effect in stereo matching procedures.

• 한국지능시스템학회논문지
• /
• 제18권2호
• /
• pp.284-289
• /
• 2008

비디오 압축 표준 중에서 H.264/AVC는 높은 압축률과 신뢰성 있는 비디오 전송을 지원하기 위해 설계된 표준이다. 이는 블록기반의 DCT를 이용하여 압축을 하기 때문에 블럭킹 효과가 나타나며 이를 감소시키기 위한 디블러킹 필터를 사용하지만 영상이 과도하게 평활화 됨으로 화질이 저하된다. 본 논문에서는 이러한 단점을 해결하기 위해 개선된 디블록킹 필터를 제안한다. 제안된 디블록킹 필터는 블록 경계 강도를 재결정하고 저주파 영역에서의 튀는 점(artifacts)을 제거하기 위해 코너 필터링을 적용한다. 성능을 평가하기 위해 제안된 디블록킹 필터와 기존의 방법을 다양한 비디오에 적용하여 주관적인 화질 평가와 객관적인 화질 평가를 하였다. 실험결과는 제안방법은 영상의 에지가 보존되면서 블록킹 현상이 감소되고 PSNR이 개선됨을 보여준다.

• 한국동물위생학회지
• /
• 제17권2호
• /
• pp.122-129
• /
• 1994

Teratogenic effects of diazinon were assessed morphologically and cholinergic blocking agents. Diazinon at doses ranging from 25 to 2000 ug /egg, was Injected on day 3 of incubation. TD50s were different for the various teratogenic signs (wry neck, micromelia, abnormal feathering, abnormal beak and curled claws). The threshould dose for wry neck was higher than threshould dose for other signs； 40 ug/egg produced substantial micromelia, abnormal feathering. abnormal beak and curled claws, but gave no signs of wry neck. In contrast to the teratogenic doses, the LD50 of diazinon was very high (above 2000 ug /egg). One of the characteristics of diazinon-induced teratogenesis was reduced body weight (78.7％) and body length (73.8%). Maximal teratogenic effects, scored as signs of retarded growth, wry neck micromelia, abnormal feathering, abnormal beak, and curled claws, were produced when the insectcide was administered on the third or fourth day. The threshold dose for type II teratogenic signs(such as wry neck and short neck) was higher than for type I (such as micromelia and abnormal feathering). Morphological studies, using atropine and gallamine, suggested that nicotine but not muscarinic receptors may be involved in the mechanism of diazinon induced type II malformations.

• 대기
• /
• 제17권3호
• /
• pp.231-240
• /
• 2007

The flow regimes of continuously stratified flow over a double mountain and the effects of a double mountain on wave breaking, upstream blocking, and severe downslope windstorms are investigated using a mesoscale numerical model (ARPS). According to the occurrence or non-occurrence of wave breaking and upstream blocking, three different flow regimes are identified over a double mountain. Higher critical Froude numbers are required for wave breaking and upstream blocking initiation for a double mountain than for an isolated mountain. This means that the nonlinearity and blocking effect for a double mountain is larger than that for an isolated mountain. As the separation distance between two mountains decreases, the degree of flow nonlinearity increases, while the blocking effect decreases. A rapid increase of the surface horizontal velocity downwind of each mountain near the critical mountain height for wave breaking initiation indicates that severe downslope windstorms are enhanced by wave breaking. For the flow with wave breaking, the numerically calculated surface drag is much larger than theoretically calculated one because the region with the maximum negative perturbation pressure moves from the top to the downwind slope of each mountain as the internal jump propagating downwind occurs.

• 한국컴퓨터정보학회지
• /
• 제1권2호
• /
• pp.95-107
• /
• 1995

동시성 제어 기업은 트랜잭션 처리 시스템의 성능에 중요한 영향을 미친다. 전통적인 록킹 기법은 대기 트랜잭션이 로크를 가지고 있으면서 진행중인 다른 트랜잭션을 블록시키는 블록킹 현상을 일으킨다. 제안된 방법은 트랜잭션 실행의 다음 단계에서 그들의 블록킹 형태를 지연함에 의해서 블록킹 확률을 감소시킨다. 트랜잭션 실행은 전통적인 록킹같은 블록킹 상태와 트랜잭션이 로크를 기다리지만 다른 트랜잭션은 블록화하지 않는 비블록킹 상태로 나누어 볼 수 있다. 그러나 비블록킹 상태 중에 처리된 데이터는 트랜잭션을 취소 시킬 수 있다. 블록킹과 취소 효과를 적절히 균형을 이루어서 제안된 방식은 모든 데이터 함유와 자원 함유 수준에서 전통적 록킹과 OCC방식보다 더 뛰어난 성능을 가지고 있다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권2호
• /
• pp.71-82
• /
• 2012

In recent practices, a half circular prismatic bar protruding beyond the concave surface of the horn facing the gap has been formed along the centerplane of a rudder to lessen the gap flow between the horn and the movable portion of the rudder system. If a flow through the gap of a rudder is reduced considerably through this approach, previous numerical studies indicate that not only the gap flow but also the rudder cavitation can be noticeably diminished. In the present study, numerical simulations on two-dimensional rudder sections were performed to show that the blocking ability of the single centre bar can be improved by the proper choice of sectional shape. Moreover, a pair of blocking bars attached symmetric to the centerplane on the opposite convex surface of the movable portion is suggested in the study as well, to circumvent the difficulties arising from the practical application of the single centre bars. The bars are placed near the outer edges of the gap easily accessible at the maximum rudder angle to allow simple installation of the device during a maintenance period of a ship. It is found that the pair of blocking bars further improves the blocking effects and application to a practical three-dimensional rudder also backs up the fact.