• Advances in pediatric surgery
• /
• 제13권2호
• /
• pp.127-134
• /
• 2007

소아 멕켈씨 게실의 가장 흔한 합병증은 장출혈이었고, 장중첩, 장폐쇄, 장천공 등도 있었다. 멕켈씨 게실의 조직검사상 이소성위조직이 가장 많았고, 이소성 췌장조직도 있었다. 소아 급성 복증의 원인으로 멕켈씨 게실에 의한 합병증을 염두에 두어야겠으며, 진단이 불명확한 경우, 복강경을 통한 진단이 도움이 될 수 있을 것이다. 또한 멕켈씨 게실의 경우 복강경하 절제술로 복강경 수술의 장점을 충분히 살릴 수 있을 것으로 사료된다.

• Journal of Periodontal and Implant Science
• /
• 제36권3호
• /
• pp.653-659
• /
• 2006

Oral malodor may cause a significant social or psychological handicap to those suffering from it. Oral malodor has been correlated with the concentration of volatile sulfur compounds (VSC) produced in the oral cavity. Specific bacteria identified in the production of VSC have been reported and many of these bacteria are commonly suspected periodontal pathogens. The aim of this study was to estimate the change of the VSC concentration after periodontal treatment, Twenty subjects with probing depth $(PD)\;{\geq}5mm$ (experimental group) and 20 subjects with PD<5mm (control group) participated. VSC concentration measurement was made with gas chromatography. VSC concentration was measured at pre-treatment, 2 weeks after scaling and 1 month after periodontal treatment(root planning and flap operation). Maximum probing depth and bleeding on probing(BOP) were also examed at pretreatment and 1 month after periodontal treatment, The conclusions were as follow: 1. In the experimental group VSC concentration and CH3SH/H2S ratio were higher than control group. (p<0.05) 2. Both VSC concentration and CH3SH/H2S ratio showed decrease after periodontal treatment, But only CH3SH/H2S ratio after 1 month periodontal treatment was statistically significantly different from pre-treatment. (p<0.05) 3. CH3SH/H2S ratio tended to be on increase according to maximum probing depth and bleeding on probing. Periodontal disease could be a factor that caused oral malodor and oral malodor could be decreased after periodontal treatment.

• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.771-783
• /
• 2017

Using a transparent fracture replica with aperture size and water-cement ratio (w/c), the factors affecting the penetration behavior of rock grouting were investigated through laboratory experiments. In addition, the waterproof efficiency was estimated by the reduction of water outflow through the fractures after the grout curing process. Penetration behavior shows that grout penetration patterns present similarly radial forms in all experimental cases; however, velocity of grout penetration showed clear differences according to the aperture sizes and water-cement ratio. It can be seen that the waterproof efficiency increased as the aperture size and w/c decreased. During grout injection or curing processes, air bubbles formed and bleeding occurred, both of which affected the waterproof ability of the grouting. These two phenomena can significantly prevent the successful performance of rock grouting in field-scale underground spaces, especially at deep depth conditions. Our research can provide a foundation for improving and optimizing the innovative techniques of rock grouting.

• 한국건설순환자원학회논문집
• /
• 제3권3호
• /
• pp.244-251
• /
• 2015

본 연구는 대경권 지역에서 생산되는 부순모래를 콘크리트용 잔골재로 활용하기 위하여 물리적 특성 및 부순모래의 조립률과 치환률이 콘크리트의 특성에 미치는 영향을 검토하였다. 실험결과 천연사의 조립률이 2.0정도이고, 부순모래 조립률이 3.2이상인 경우 천연사와 부순모래의 합성입도를 만족시키기 위한 부순모래의 치환률은 50% 이하가 적당한 것으로 나타났다. 부순모래를 사용한 콘크리트는 부순모래의 치환률이 증가할수록 슬럼프는 증가하는 것으로 나타났으나, 부순모래의 치환률 75% 이상에서는 현저한 워커빌리티 저하현상을 나타내었다. 또한 부순모래를 사용한 콘크리트의 공기량 및 블리딩은 부순모래 치환률이 증가할수록 감소하였으며, 콘크리트 압축강도는 부순모래 조립률에 관계없이 시멘트페이스트와 골재간의 부착력 증진에 기인하여 치환률이 증가할수록 증가하는 경향을 나타내었다.

• 콘크리트학회논문집
• /
• 제28권5호
• /
• pp.519-525
• /
• 2016

본 논문에서는 혼화제에 따른 3성분계 그라우트에 대하여 자유수축 및 구속수축에 대하여 평가하였다. 본 연구에서 3성분계 그라우트는 플라이애쉬, 지르코늄 실리카퓸을 사용하였고, 팽창재(a, b)와 수축저감제 혼화제를 병용 사용하였다. 또한 유럽규정 EN 445에 따라 그라우트의 기본재료특성 실험을 수행하여 블리딩, 체적변화량, 유동성, 압축강도 실험을 수행하여 기본재료특성 거동도 분석하였다. 실험결과, 팽창재와 수축저감제 혼입률에 따라 유동성은 다소 영향은 없었으나, 우수한 블리딩 및 침하 저감성능과 압축강도를 나타났다. 자유수축 거동에서는 팽창재와 수축저감제를 혼입한 변수들은 0.0E-0.0R 변수보다 최소 29%의 수축저감성능을 보여 주었다. 특히 팽창재 a와 수축저감제를 병용 사용한 변수에서는 수축 저감의 효과가 더욱 우수한 것으로 나타났으며, 혼화제의 혼입률이 증가할수록 텐던 구속에 의한 수축균열은 뒤늦게 발생함을 알 수 있었다. 그러나 유독 팽창재 a 2.0%, 수축저감제 0.50%를 혼입한 변수에서는 우수한 수축저감성능으로 수축균열이 발생하지 않았다. 종합하여 볼 때, 본 연구의 실험 조건에서는 팽창재 a 2.0%, 수축저감제 0.50%인 조합이 PSC 교량용 고품질 3성분계 그라우트의 최적의 혼입률인 것으로 분석된다.

• 콘크리트학회논문집
• /
• 제21권5호
• /
• pp.565-572
• /
• 2009

이 연구에서는 전기화학적 기법을 사용하여 혼합콘크리트의 일종인 palm oil fuel ash(POFA) 콘크리트의 부식저항성을 평가하였다. POFA는 야자수로부터 야자유를 정제하고 난후 야자수 재로 추출되어진 산업 재생 폐기물을 일컫는다. POFA 콘크리트의 기본 물성 특성분석을 위해서 초기재령에서의 POFA 콘크리트의 압축강도, 슬럼프, 중량감소율, 블리딩 및 팽창비 특성 분석실험을 수행하였다. 한편, 내구성 특성분석을 위해서 염소이온침투시험 및 중성화 침투시험도 수행하였다. 마지막으로 전기화학적 균열치유기법을 사용하여, 가압전압 특성분석, 갈바닉 전류특성분석 및 선형분극저항 평가 등의 부식저항성 평가를 실시하였다. 실험 결과로부터, 장기재령의 강도, 블리딩, 슬럼프 특성, 팽창비, 염소이온 확산성, 탄산화 저항성 및 부식저항성의 향상 효과가 활성화 되어진 POFA 콘크리트의 포졸란 반응에 기인하여 이루어지고 있음을 확인하였다. 따라서 POFA 콘크리트는 그린-재생 자원으로서 시멘트계 대체 결합재로서의 이용가능성이 있음을 확인할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2384-2389
• /
• 2007

The 2nd order response surface method (RSM) has been carried out to get optimum thermal design for enhanced heat transfer on square channel with bleed holes. The RSM was used as an optimization technique with Reynolds-averaged navier-stokes equation. Turbulence model for heat transfer analysis used RNG k-epsilon model. The wall function used enhanced wall function. Numerical local heat transfer coefficients were similar to the experimental tendency. Two design variables such as attack angle of rib (${\alpha}$), rib pitch-to-rib height ratio (p/e) were chosen. Operation condition considered bleeding ratio per bleed hole ($BR_{hole}$). A response surface were constructed by the design variables and operation condition. As a result, adjusted $R^2$ was more than 0.9. Optimization results of various objective function were similar to heat transfer in channel with and without bleed flow. But friction factor was lower than channel without bleed flow.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.324-331
• /
• 2016

The present study focuses on the characteristics of a supersonic jet flowing from a rectangular nozzle exit on a flat plate. Flow visualization techniques using schlieren and kerosene-lampblack tracing are utilized to investigate shock reflection structures and boundary-layer separations over a flat plate. Wall pressure measurements are also carried out to quantitatively analyze the flow structures. All observations are repeated for multiple jet flow boundary conditions by varying the flap length and nozzle pressure ratio. The experimental results show that the jet flow structures over the flat plate are highly three-dimensional with strong bleeding flows from the plate sides, and that they are sensitive to plate length and nozzle pressure ratio. A multi-component force measurement device is also utilized to observe the characteristics of the jet flow thrust vectoring over the plate. The maximum thrust deflection angle of the jet is about $8^{\circ}$, demonstrating the applicability of thrust vector control via a flat plate installed at the nozzle exit.

• KCI Concrete Journal
• /
• 제13권2호
• /
• pp.58-66
• /
• 2001

Recently, polymer-modified mortar has been studied for proposed use on industrial floors as top coat with thin thickness, typically 5~15mm. The purpose of this study is to evaluate basic properties of self-leveling materials using polymer dispersions as kinds of SBR, PAE, St/BA with thin coat (under 3mm). Superplasticizer and thickener have been included in the mixes to reduce bleeding and drying shrinkage as well as to facilitate the workability required. The self-leveling materials using four types of polymer dispersion are prepared with polymer-cement ratio which respectively range from 50% and 75%, and tested for basic characteristics such as unit weight, air content, flow, consistency change and adhesion in tension. From the test results, the self-leveling materials using PAE emulsion at curing age of 28days are almost equal to those of conventional floor using urethane and epoxy resin. The adhesion in tension of self-leveling mortars using SBR latex and PAE emulsion at curing age of 3days is over 17 kgf/cm$^2$(1.67MPa). Consistency change is strongly dependent on the type of polymer dispersion. It is concluded that the self-leveling materials using polymer dispersions can be used in the same manner as conventional floor using thermosetting resin in practical applications, in the selection of polymer dispersions.

• Journal of Chest Surgery
• /
• 제19권1호
• /
• pp.140-147
• /
• 1986

A clinical study was made on 72 cases of primary lung cancer operated in the department of thoracic & cardiovascular surgery, Kyungpook national university hospital from January 1975 to May 1985. The ratio of male to female was 13.4: I and mean age was 53. Histologically, squamous cell carcinoma comprised 72.2% of 72 operated cases. Before admission to our hospital, the erroneous diagnoses were made at local clinics on the 43 cases[59.7%] and a large percentage of them was diagnosed as pulmonary tuberculosis. And then, total of 56 cases received inadequate treatment or delayed the operation. For the location of the tumor, right to left ratio is 1.2:1 and the right upper lobe was most often involved [23.6%]. Operation was performed on the 72 cases and resection on the 59 cases[8.2%]. Postsurgical staging showed that stage III was found most frequently [59.4%] and T,N,M, was 28% of total cases. Two common surgical complications were bleeding in 7 and acute respiratory failure in 6 cases, and these 6 cases of acute respiratory failure were all died. On the basis of these experiences, we conclude that aggressive effort is needed for the early accurate diagnosis and adequate treatment of lung cancer.