• Journal of the Korean Wood Science and Technology
• /
• v.7 no.2
• /
• pp.3-30
• /
• 1979

Larch ($\underline{Larix}$ $\underline{leptolepis}$ GORDON), one of the major afforestation species in Korea in view of its growing stock and rate of growth, is not favored as a raw material for pulp due to its low yield of pulp and difficulties with bleaching arising from the high content of extractives in wood, and the high heartwood ratio and the active phenolics, respectively. The purpose of this study is to investigate the characteristics of firstly pulping with various additives of cellulose protector for the yield of pulp, and secondly bleaching with oxygen for chlotination-alkali extraction of five stage-sequence to reduce chlorine compounds in bleaching effluents. The kraft cooking liquor for five age groups of larchwood was 18 percent active alkali with 25 percent sulfidity and 5 : 1 liquor-to-wood ratio, and each soda liquor for sap-and heart-wood of the 15-year-old larchwood was 18 percent alkali having one of the following cellulose protectors as the additive; magnesium sulfate ($MgSO_4$, 2.5%), zinc sulfate ($ZnSO_4$, 2.5%), aluminium sulfate ($Al_2(SO_4)_3$, 2.5%), potasium iodide (KI, 2.5%), hydroquinone (HQ, 2.5%), anthraquinone (AQ, 0.1%) and ethylene diamine (EDA, 2.5%). Then each anthraquinone-soda liquor for the determination of suitable cooking condition was the active alkali level of 15, 17 and 19 percent with 1.0, 0.5 and 0.1 percent anthraquinone, respectively. The cooking procedure for the pulps was scheduled to heat to 170$^{\circ}C$ in 90 minutes and to cook 90 minutes at the maximum temperature. The anthraquinone-soda pulps from both heartwood and sapwood of 15-year-old larchwood prepared with 0.5 percent anthraquinone and 18 percent active alkali were bleached in a four-stage sequency of OCED. (O: oxygen bleaching, D: chlorine dioxide bleaching and E: alkali extraction). In the first stage oxygen in atmospheric pressure was applied to a 30 percent consistency of pulp with 0.1 percent magnesium oxide (MgO) and 3, 6, and 9 percent sodium hydroxide on oven dry base, and the bleached results were compared pulps bleached under the conventional CEDED (C: chlorination). The results in the study were summarized as follows: 1. The screened yield of larch kraft pulp did not differ from particular ages to age group, but heartwood ratio, basic density, fiber length and water-extractives contents of wood and the tear factor of the pulp increased with increasing the tree age. The total yield of the pulp decreased. 2. The yield of soda pulp with various chemicals for cellulose protection of the 15-year-old larchwood increased slightly more than that of pure soda pulp and was slightly lower than that of kraft pulp. The influence of cellulose protectors was similar to the yield of pulps from both sapwood and heartwood. The effective protectors among seven additives were KI, $MgSO_4$ and AQ, for which the yields of screened pulp was as high as that of kraft pulp. Considering the additive level of protector, the AQ was the most effective in improving the yield and the quality of pulp. 3. When the amount of AQ increased in soda cooking, the yield and the quality of the pulp increased but rejects in total yield increased with decreasing the amount of active alkali from 19 to 15 percent. The best proportion of the AQ seemed to be 0.5 percent at 17 percent active alkali in anthraquinone-soda pulping. 4. On the bleaching of the AQ-soda pulp at 30 percent consistency with oxygen of atomospheric pressure in the first stage of the ODED sequence, the more caustic soda added, the brighter bleached pulp was obtained, but more lignin-selective bleaching reagent in proportion to the oxygen was necessary to maintain the increased yield with the addition of anthraquinone. 5. In conclusion, the suitable pulping condition for larchwood to improve the yield and quality of the chemical pulp to the level for kraft pulp from conventional process seemed to be. A) the selection of young larchwood to prevent decreasing in yield and quality due to the accumulation extractives in old wood, B) the application of 0.5 percent anthraquinone to the conventional soda cooking of 18 percent active alkali, and followed, C) the bleaching of oxygen in atmospheric pressure on high consistency (30%) with 0.1 percent magnesium oxide in the first stage of the ODED sequence to reduce the content of chlorine compounds in effluent.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.51-59
• /
• 2006

The surface of various mechanical pulp fibres including thermomechanical pulp (TMP), chemithermomechanical pulp (CTMP), and alkaline peroxide mechanical pulp (APMP) fibres, were characterized using SEM, AFM, and XPS. With SEM and AFM, middle lamella material was observed to be non-fibrillar, patch-like, while fibre secondary wall was observed to have a microfibrillar structure. It was found that after the first-stage refiner, lignin-rich middle lamella remainders are present on the fibre surface of all three pulps, although most of the fibre surfaces expose microfibrillar structure. After the final-stage refining, large amounts of granules are present on the TMP fibre surface. In contrast, most middle lamella remainders remain on the surface of CTMP fibres after final stage refining and even after peroxide bleaching. XPS results have confirmed that the non-fibrillar surface material is the lignin-rich middle lamella remainder., and the remainders of middle lamella contribute to the high surface lignin concentration.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.3
• /
• pp.45-51
• /
• 1989

A major problem in the enzymatic hydrolysis of lignocellulosic substrates is the very strong bonding of cellulase to lignin and even cellulose in the hydrolysis residues. This phenomenon inhibits recycle of the cellulase which is a major expense of the enzymatic hydrolysis process. In this paper, autohydrolyzed wood was delignified by two-stage with a 0.3% Na OH extraction and oxygen-alkali bleaching and was subjected to enzymatic hydrolysis with cellulase. Also, an improved almost quantitative recycle process of cellulase enzyme was discussed. In enzyme recovery by affinity method. the first recycling showed relatively high hydrolysis rate of 97.4%. Even at the third recycle. hydrolysis rate was 86.7 percents. In the case of cellulase recovery by ultrafiltration method, first 2 recycling treatments resulted very high hydrolysis rate(97.0-97.7%). Even the third recycling showed about 94.2%. Authoydrolysis of oak wood followed by 2-stage delignification with alkali and oxygen-alkali produced a substrate for enzymatic hydrolysis that allowed almost quantitative recycle of cellulase.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.1
• /
• pp.14-21
• /
• 1991

Steam-exploded woods were delignified by two-stage with a 0.3% NaOH extraction and oxygen-alkali bleaching and were subjected to the enzymatic hydrolysis with cellulase enzyme. Also, an improved almost quantitative recycle process of cellulase enzyme was discussed. In enzyme recovery by affinity method, The first recycling showed relatively high hydrolysis rate of 96.4%. Even at the third recycle, hydrolysis rate was 87.0 percents. In the case of cellulase recovery by ultrafiltration method, first 2 recycling treatments resulted in very high hydrolysis rates, 96.8% and 95.0%, respectively. Even the third recycling showed about 93.6%. Steam-explosion treatment of oak wood followed by 2-stage delignification with alkali and oxygen-alkali produced a excellant substrate for the enzymatic hydrolysis that allowed almost quantitative recycle of cellulase.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.3
• /
• pp.74-78
• /
• 2003

The structural property of phenolic and non-phenolic lignin has an effect on the reaction rate of lignin by oxygen and chlorine dioxide respectively. Moreover, the undesirable degradation of cellulose followed by lignin degradation is influenced by chemical charge and reaction time. In this paper, several lignin model compounds were used to illuminate the interaction of oxygen and chlorine dioxide by varying the position of O and D(OD, DO, ODO and DOD), and gas chromatography method was used to investigate the degradation of lignin by determining the content of methoxyl groups in lignin. It was shown that structural properties of lignin models were more influential on the degradation and demethylation of lignin than the above combination. Combination of oxygen and chlorine dioxide, however, was more effective in degradation of lignin than only one stage, and three stages than two stages.

• Korean Journal of English Language and Linguistics
• /
• v.4 no.2
• /
• pp.151-174
• /
• 2004

A historical investigation reveals that English preposition with underwent a change from OPPOSITION to ASSOCIATION and further to ACCOMPANIMENT, where the first stage shows peculiarity in that the two concepts involved comprise an unusual set to form an extensional chain. Intrigued by this oddity, this paper aims to investigate the semantic structure of English preposition with from a grammaticalization perspective. We review mechanisms and models of semantic change and evaluate their adequacy with the semantic structure and change shown by with. Drawing upon the observed fact that with underwent the apparent antonymic semantic change, it is argued that such semantic change mechanisms as metaphor, metonymy, subjectification, and generalization have difficulties explaining the change, and that only the Frame-of-Focus Variation can effectively account for this peculiar change type. In terms of semantic change models, we argue that the Bleaching Model cannot effectively provide an explanation; that the Loss and Gain Model has problems in explaining the motivation of change directions; that the Metonymic-Metaphoric Model cannot be assessed at the current level of investigation; and that the Overlap Model and the Prototype Extension Model excellently account for the macro-level changes.

• Journal of Ginseng Research
• /
• v.18 no.3
• /
• pp.175-181
• /
• 1994

We studied the folilar wiping effects of antioxidants (ascorbate, glutathione and sodium azide), which effectively inhibited the chlorophyll bleaching or completely recorved the early stage of photosynthesis of Panax ginseng C.A. Meyer, on photosynthesis, stomatal resistance, free sugar, starch, and total saponin contents of ginseng under the excess light intensity (45 kLux) during 6 days. Ascorbate and glutathione, endogenous antioxidant, recovered photosynehtsis and stomatal resistance, and reduced the photoinhibition by the excess light intensity (45 kLux) on free sugar, starch and total saponin contents. But sodium azide, exogenous $^{1}O_2$ quencher, showed negative effect. Therefore, we assumed that carbohydrates and saponin metabolisms of ginseng by antioxidants (ascorbate, glutathione) were normal. For the reduction of inhibition by excess light in ginseng a program for the higher activation of antioxidants and antioxidative enzymes in ginseng leaf will be desirable. Key words Antioxidants, ascorbate, glutathione, Photoinhibition, ginseng.

• Journal of the Korean Society of Costume
• /
• v.62 no.5
• /
• pp.125-137
• /
• 2012

This study examines the stage costumes of the creative musical 'Hyecho', which was performed six times in the Chung Ang Art Center hosted by Chung-Ang University's performance & media agency from December 20 to 22 in 2006. The stage costumes were made based on these basic design elements of stage costumes that were dyed : line, silhouette, material, and color. First, the creative musical 'Hyecho' presents a new form of fusion theatre, which blends Korean traditional music and dance with videos. Thereby, the musical has opened a new phase in Korea's creative performing arts. Second, in musical performances that combines dance and songs, stage costumes should be made not only to attract the audience's eyes, but also not to interrupt actors' vocalizations and movements by taking their physical features into account. Also, costumes should be made in consideration of their relationships with visual elements, including stage settings and lighting. Third, the musical features fusion-style stage costumes, which combines Hanbok, the Korean traditional costume, and Indian traditional costumes with modern costumes. For the line and silhouette, costumes show the beauty of curves through the curves of Hanbok and India's traditional costumes and also through irregular pleats of pants. Also, by using cotton materials, which is easy to dye and not readily deformed, costumes feature colors that are found in nature through a gradation dyeing technique. In doing so, it offers visual amusement to the audience by making stage costumes look like a beautiful painting. Fourth, the stage costumes of the chorus feature costumes that use lining and pleated skirts using belts, and various accessories, including necklaces that use strings in order to express evil spirits. Since there is not much time to change costumes during a performance, using such items are helpful to show the unique characteristics of actors effectively during the limited time. Also, coordinating with the lighting director allows the costume designer to make better costumes for the chorus and make the performance more dramatic. Finally, it was not necessary to wash the costumes of the chorus of the fusion musical Hyecho 2006 since it was performed only six times. However, when using dyed costumes for the long-term performance, it might cause problems such as bleaching that result from the washing of costumes and low durability that can result in the deformation of costumes. As performing arts are made in various forms and are diversified, it is needed for stage costumes to change accordingly through new attempts and various ways of expression.

• Korean Journal of Weed Science
• /
• v.12 no.2
• /
• pp.89-101
• /
• 1992

In this study, various physiological and biochemical experiments were conducted to know whether the selectivity between rice and barnyardgrass treated with bleaching herbicides containing diphenyl ether compounds was also partly based on their basic physiological proterties such as peroxidation ability, membrane stability or antioxidant system. It seemed to be partly based on the differences of their physiological characteristics that barnyardgrass was commonly more susceptible to most of the bleaching herbicides than rice. The scenescence of intact leaf segment was more rapid in barnyardgrass than in rice, indicating that barnyardgrass is weak at early stage. Also pigment metabolic ability, antioxidant enzyme activities(peroxidase, catalase, superoxide dismutase, glutathione reductase) and antioxidant content (tocopherol, ascorbic acid, glutathione, carotenoids) were lower in barnyardgrass on the basic of fresh weight. However, lipoxygenase activity and the content of unsaturated fatty acid which is vulnerable to oxygen radicals were higher in barnyardgrass, suggesting that barnyardgrass seedling bave a properties easy to be peroxidized. The differences of PPIX (protoporphyrin IX) or carotenoid content, which are the primary substances inducing herbicide activity, were not related to the selectivity between rice and barnyardgrass.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.11
• /
• pp.1454-1464
• /
• 2005

The study was based on a three-stage, non-repetitive factorial experiment in which chemical-rotted kenaf fibers were treated separately with hydrogen peroxide concentrations of $0.5\%,\;1\%\;and\;2\%$, with pH solutions of 7, 9 and 11, and treatment times of 30, 60 and 90 minutes. Under optimal conditions, the study was conducted to determine the strength and elongation of kenaf fibers by the addition of chelators, penetrants and surfactants. The hydrogen peroxide concentration, solution pH and treatment time directly affected the strength of kenaf fibers. The hydrogen peroxide concentration, solution pH affected the elongation of kenaf fibers. It was found, however, that the interaction between pH and treatment time, concentration and treatment time, concentration and treatment time and pH affected the strength of kenaf fibers. Also, It was found that the interaction between pH and concentration, concentration and treatment time, concentration and treatment time and pH affected the elongation of kenaf fibers. Under the hydrogen peroxide conditions of $2\%$ concentration, pH 11 and a treatment time of 60 minutes, there were no effects on the strength and elongation of kenaf fibers with the addition of chelator SP, CA.