• 펄프종이기술
• /
• 제29권2호
• /
• pp.36-45
• /
• 1997

Newly bleaching sequence using oxygen, ozone and hydrogen peroxide has introduced to avoid pollution hazards from chlorinated organic compounds, because chlorine dioxide substitution bleaching was produced a little chlorinated organic substance. Oxygen-type chemicals replaced for chlorine has attracted much research attention. Bleachability of ozone was improved at low temperature and high pulp consistency. In third bleaching followed OZ bleaching, addition of O2 and NaBH4 in alkali extraction was effective than only alkali extraction. Bleachability of pulps in ozone bleaching(Z) was improved at higher consistency and lower temperature The addition O2 and NaBH4 in alkali extraction after OZ bleaching sequence improved brightness, when compared to those obtained by only alkaline extraction. Pulps bleached by ECF bleaching sequences such as OZEoD and OZEopD was obtained by 90% ISO brightness. The brightness of pulp bleached by TCF sequences with the ozone dosage of 1.6% was approached to target brightness (88~90%ISO). Pulps bleached Z stage combined bleaching sequence was reduced the viscosity to a little greater extent. However, physical properties of pulps was not great different compared to those bleached by conventional bleaching sequences. A pollution index of bleaching effluente by ozone combined bleaching sequences was lower than by conventional bleaching sequence, but somewhat higher than multistage bleaching sequences combined C/D stage.

• 한국식품과학회지
• /
• 제12권3호
• /
• pp.200-204
• /
• 1980

식용유 정제 공장에서의 실제적인 조건 하에서 저장된 말레이시아산 탈산팜유(refined palm oil)의 연속식 고온 탈색 공정(continuous heat bleaching process)의 가능성을 알아 보기 위하여 일련의 실험을 하였다. 그 결과를 보면, 5개월간의 저장 기간 중 종종 시료(試料) 채취(採取) 시(時)를 제하고는 계속해서 고체상으로 stainless steel 저장 탱크에 저장한 경우, 연속식으로 고온 탈색 후 산성 백토에 의한 탈색과 탈취 공정을 거친 최종 팜유는 탈색 및 탈취만을 거치는 재래식 공정에 의해서 얻은 최종 팜유 보다 붉은 색이 훨씬 감소되었고, Lovibond color로 각각 1.3 red와 2.6 red 이었다. 한편 5개월간의 저장 기간 중, 질소 가스 존재 하에 carbon steel 저장 탱크에서 $38{\sim}60^{\circ}C$의 온도하에서 액체상으로 저장한 경우, 고온 탈색 공정을 거친 최종 팜유와 재래식 공정을 거친 최종 팜유의 붉은 색은 Lovibond color로 각각 2.7 red와 2.8 red이었으며, 고온 탈색 공정이 탈색에 별 도움이 되지 못하였다. 그 이유는 주로 저장 기간 중 저장 탱크에서 비교적 높은 온도 때문에 용해된 철분 (6.53 ppm)과 고온에 의한 열화 헌상 때물인 것으로 판단되었다. 과산화 값, 아니시딘 값 등의 산화 값(oxidation value)은 고온 탈색도(heat bleachability)와 상관 관계가 없었고 트랜스 이성체 생성에 영향이 없었으나 중합물 생성에는 약간의 영향이 있었다.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.109-114
• /
• 2015

In this study, the effects of chlorine dioxide (D) bleaching conditions on the delignification of hemp bast fiber were elucidated. Chlorine dioxide bleaching was carried out through three stages (DED) and five stages (DEDED), respectively. Applied amounts of chlorine dioxide at $D_1$ and $D_2$ stages were varied to find the optimum bleaching condition. It was found that the optical properties of its handsheet as well as the delignification of hemp bast fiber increased as the concentration of chlorine dioxide at $D_1$ stage increased. It was also notable that the bleachability of the DEDED bleaching stages was slightly more effective than that of the DED bleaching stages. The burst index of the handsheets made with bleached hemp bast fiber was higher than that of the unbleached samples, but the burst index of these samples decreased as their delignification increased. These results indicated that the higher concentration of chlorine dioxide at $D_1$ stage was major factor to improve the bleaching efficiency of hemp bast fiber.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.49-57
• /
• 1999

In CLO2 delignification and bleaching process, formation of chlorate corresponds to a loss of 20-36% of the original CKO2 charge. Because chlorate is inactive and harmful to environmental, it will be of benefit to find methods that can reduce the formation of chlorate during chlorine dioxide bleaching. Chlorate is mainly formed by the reaction HCIO +ClO2 $\longrightarrow$H+ + Cl_ +ClO3-2 On the other hand, AOX in chlorine dioxide bleacing is formed also due to the in-situ produced hypochlorous acid. THus both AOX and chlorate could be reduced by addition of hypochlorous acid. Some paper son the reduction of AOX by additives appeared , but systematic data on chlorate reduction as well as pulp and effluent properties are not available. THus this paper of focused on the effects on the reduction of chlorate and chlorine dioxide bleachability. The additives, fulfamic a챵, AMSO, hydrogen peroxide, oxalic acid were found to eliminate chlorine selectively in chlorine and chlorine dioxide mixture.However, when they were added to bleaching process, sulfamic acid and DMSO showed significant reduction of chlorate formation but hydrogen peroxide and oxalic aicd did not, and significant amount ofhydrogen peroxide was found resided in the bleaching effluent , In addition, sulfamic acid and DMSO decreased the bleaching end ph values while hydrogen peroxide and oxalic acid did not, which also indicated that hydrogen peroxide and oxalic acid were ineffective. The difference might be ascribed to the competitives of hypochlorous acid with lignin, chlorite (CKO2) and additives. Sulfamic acid and DMSO showed better pulpbrightness development but less alkaline extraction efficiency than hydrogen peroxide , oxalic acid and control, which means that insitu hypochlorous acid contributes to the formation of new chromophore structures that can be easily eliminated by alkaline extraction. DMSO decreased the delignification ability of chlorine dioxide due to the elimination of hypochlorous acid, but sfulfamic acid did to because the chlroinated sulfamic acid had stable bleachability. In addition, sulfamic acid, and SMSO shwed decreased color and COD of bleaching effluents, hydrogen peroxide decreased effluent color but not COD content, and oxalic acid had no statistically significant effects. No significant decreases of pulp viocosity were found except for hydrogen peroxide. Based on our results , we suggest that the effectiveness of hydrogen peroxide on the reduction of AOX in literature might be explained by other mechanisms not due to the elimination of hypochlorous acid , but to the direct decomposition of AOX by hydrogen peroxide.

• 펄프종이기술
• /
• 제41권1호
• /
• pp.1-8
• /
• 2009

Mountain Pine Beetle (MPB) attacked pine was evaluated for pulp quality, chemical and physical properties, and bleachability. Chemical analyses showed that the dehydroabietic acid and total acetone extractives content were higher in the year 3 (grey) attacked MPB chips and lower in the year 5 (grey) attacked MPB chips as compared to a typical SPF (spruce/pine/fir) reference. Lignin and carbohydrate content of the MPB wood chips were comparable to the SPF. Similarly, there was little difference in kappa number, pulp yield and liquor consumption between the 3 and 5 year MPB attacked wood. Likewise there was no significant difference in the resulting tear strength, burst, or tensile strength. There appeared to be an improved bleaching response in the MPB attacked pulp as compared to the SPF reference, but this was accompanied by a slightly lower bleached pulp yield and higher bleach filtrate COD and solids content.

• 펄프종이기술
• /
• 제44권1호
• /
• pp.65-73
• /
• 2012

Nowadays, the concern on the environmental load of bleaching process gave rise to the process of ECF(elemental chlorine free) and TCF(total clorine free). These sequences are based on oxygen-derived compounds such as oxygen, ozone, and hydrogen peroxide which is used as a typical eco-friendly bleaching agent. In this study, paper mulberry pulp was bleached with hydrogen peroxide and some bleaching process were accompanied with ultrasonication in order to increase the bleaching efficiency. The best bleaching efficiency of paper mulberry pulp was obtained in the condition of hydrogen peroxide and ultrasonication(20 kHz) bleaching system at $45^{\circ}C$ for 30 min. The brightness and kappa number of paper mulberry pulp were gained to 5.09% and 3.52 respectively. and yield was slightly loosed to 2%. Therefore, the efficiency of hydrogen peroxide and ultrasonication bleaching system of paper mulberry pulp was superior to the conventional hydrogen peroxide bleaching system. Magnesium sulfate acted as a bleaching stabilizer for the increasement of yield. As a result, the yield and viscosity were increased to 2.2% and 12% respectively.

• 펄프종이기술
• /
• 제47권1호
• /
• pp.66-74
• /
• 2015

DIP(deinked pulp) was bleached by FAS, $Na_2S_2O_4$ and $H_2O_2$, which are widely used in DIP bleaching process, in order to improve optical properties of DIP, and the bleaching efficiencies of DIP and environmental loads of waste water were compared, depending on bleaching chemical dosages. With the application of different bleaching chemicals, some positive improvements were shown in optical and physical properties of bleached pulp. However, the physical properties of bleached DIP and their characteristics of wastewater were remarkably different, depending on dosages and bleaching reagents. DIP chemicals with FAS and $Na_2S_2O_4$ have higher improvement in optical and physical properties than $H_2O_2$. Also, environmental loads such as pH, turbidity, SCODcr and cationic demand were decreased in reductive bleaching process. Despite of higher effectiveness of reductive bleaching process, there were some environmental problems caused by sulfur ions from FAS and $Na_2S_2O_4$. With the method of sulfur ion controls, it would be more effective than $H_2O_2$ bleaching process.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 추계학술발표논문집
• /
• pp.194-204
• /
• 1999

The use of genetically cloned xylanase acquired from Bacillus strearthermophillus improves bleachability for oak kraft pulps. Combination of xylanase(X). oxygen(O), ozone(Z). peroxide(P), alkaline extraction(Eo. Eop), and chlorination(C/D, D) have been tested in a variety of bleaching sequences. The effectiveness of xylanase pre-treatment(XO) and post-treatment(OX) in oxygen bleaching is mainly compared. With xylanase treatment the brightness increase by 1.5-2.1% ISO in OZEP, OZEoP, OZEopP and OPZP sequences. There is only numerically difference of brightness gains between OX and XO sequences. With xylanase treatment chemical requirements for bleaching decrease by 42.6-48.6% in OC/DEoD sequence and 47.9-54.7% as active chlorine in OC/DEopD sequence at the same brightness. the reduction of bleaching chemicals is higher in XO sequence than those in OX sequence. Following xylanase treatment the viscosity increases from 11.7-12.0 mPa·s to 12.4-13.5 mPa·s and the brightness stability is considerably improved however the difference of effectiveness between XO and OX sequence is not present. Compared to tensile index vs tear index, the physical properties are similar for TCF bleaching sequences with and without xylanase treatments. However in OC/DEoD and OC/DEopD sequences the physical properties decrease with xylanase treatment. There is no difference in the physical properties between XO and OX sequences. COD, BOD and color of bleaching effluents increase slightly with xylanase treatment, however the discharge of COD end-load into environmental impact decrease.

• 공업화학
• /
• 제10권8호
• /
• pp.1169-1174
• /
• 1999

본 연구에서는 sodium 2-diazo-1-naphthoquinone-5-sulfonate를 chlorination하여 2-diazo-naphthoquinone-5-sulfonyl chloride(NQD-Cl)를 합성하였다. NQD-Cl을 여러 종류의 hydroxybenzophenone 유도체와 esterification하여 hydroxy group이 2-diazo-naphthoquinone-5-sulfonyl(NQD) group으로 치환된 여러 종류의 1,2-naphthoquinone-(1,2)-diazide-5-sulfonic acid esters(NQD0ester) 유도체를 합성하였다. NQD-ester 유도체의 용해도를 증가시키기 위해 methoxy group이 도입된 유도체와 이와 비교를 위해 hydroxy group만을 가지는 benzophenone 유도체를 사용하여 비교하였다. 각각의 NQD-ester 유도체의 용해특성을 조사하였으며, novolac수지와 혼용(formulation)하여 감광액을 제조하여 알루미늄판에 도포, 건조하여 PS판을 제조하였다. PS판의 감광특성과 광퇴색도와 화상형성에 적합한 노광시간을 조사하였으며, 상대감도를 gray scale(GS)법으로 조사하였다. 치환된 NQD group 의 수에 따라 GS법에 의한 상대감도가 다르게 나타나는 것을 알 수 있었다. Methoxy group이 도입된 NQD-ester유도체는 좋은 용해특성을 보여주었으며 시판되는 PS판과 동일한 노광조건에서 비교해 본 결과 보다 우수한 감도를 보였다.

• 환경생물
• /
• 제17권2호
• /
• pp.191-198
• /
• 1999

침엽수와 활엽수 펄프내의 리그닌(lignin) 제거 효과를 개선하기 위해 호알칼리성 균류인 Cephalospotium sp. RYM-202의 xylanase를 표백 전처리하고 이에 의한 펄프의 표백 증진 효과를 조사하였다. 두 종류의 펄프 모두 5$0^{\circ}C$에서 효소반응을 수행하였을 때 펄프내 xylan의 가수분해가 가장 높게 나타났다. 펄프내 xylan의 가수분해를 위한 효소의 최적 pH는 8.0이었으며, pH 9.0에서도 최대활성의 90%이상이 유지되었다. 각각의 펄프 재료에 효소를 전처리한 결과 표백(리그닌 제거)과정의 증진 효과를 보였으며, 침엽수와 활엽수의 kappa number는 각각 3.7과 2.0 ISO units 만큼 감소되었다. 아울러 효소처리 혹은 효소 미처리 펄프를 각각 표백한 후 수초지를 제조하여 종이의 물성을 상호 비교한 바, 효소처리는 종이의 섬유 구조에 큰 영향을 끼치지 않는 것으로 나타났다. 이러한 결과들은 호알칼리성 Cephalospotium sp. RYM-202의 알칼리내성 xylanase가 알칼리 조건하에서의 펄프 전처리 과정에 매우 적합함을 의미한다.