• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.228-231
• /
• 2004

The purpose of this study evaluates possibilities of waste phosphogypsum into concrete by steam curing admixture. The waste phosphogypsums were classified into 4 forms(Dihydrate, $\beta-Hemihydrate$, III-Anhydrite and II-Anhydrite) which were changed to in low temperature of calcination. Also, various admixtures were made of waste phosphogypsum(PG) and pozollanic fine powderers (Fly-ash, Blast Furnace Slag), and the basic properties of the cement mortars incorporating with these admixtures were examined and analyzed under a verity of experimental conditions. As a result, III-Anhydrite, these is similar to II-Anhydrite from compressive strength and are great in the effect of strength improvement. also, it was proved that specimens made on type III-Anhydrite of waste phosphogypsum and blast furnace slag increased on the compressive strength of cement mortar. Therefore, III-Anhydrite phosphogypsum calcined at lower temperature could be used as steam curing admixture for concrete 2th production.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.144-149
• /
• 2000

Porous cement concrete was developed to prevent hydroplaning of airway pavement or to reduce noise emission in highway. In has been introduced in domestic since early 1980' and applied to a pedestrian road or bike way. The concrete, however, has problems such as lack of optimized mix design, low strength and deterioration, etc. The purpose of this study is to manufacture porous cement concrete using blast-furnace slag to enhance mechanical properties. The results of this study are as follows; the compressive strength range is 102∼247kgf/㎠, the tensile strength range is 16∼70kgf/㎠, the bending strength range is 43∼70kgf/㎠, and the coefficient permeability range is 6.79 ×10-2∼1.17∼10-1cm/sec. To develope high-performance porous concrete, further studies are needed on optimum mixture of fineness modulus and admixture.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.39-44
• /
• 1993

The aim of this study is to develop High Performance Concrete, which can fill in every corner of forms without using any vibrators. In order to place concrete into reinforced members, concrete should have segregation resistance and high flowability. In this study, the binder of concrete, such as Ordinary Portland Cement, fly ash, and blast furnace slag, cement were mixed with the addition of superplasticizers and tested their flowability and segregation resistance using slump flow tester and L type flow tester. As a results, High Performance Concrete can be made using Portland blast furnace slag cement along with superplasticizers but the slump-loss of concrete is so large that measure should be made.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.945-950
• /
• 2000

Coastal concrete structure is harmed by physical and chemical action of sea water, impact load, meteorological effect and etc. especially, premature reinforcement corrosion in concrete exposed to sea water has an important problem. In this study, the behavior of chloride ions penetrated through the coastal concrete structure with ordinary portland cement or ground granulated blast furnace slag(GGBFS) was modeled. The physicochemical processes including the diffusion of chloride and the chemical reaction of chloride ion with calcium silicate hydrate and the other constituents of hardened cement paste such as$C_3A$ and $C_4AF$were analyzed by using the Finite Element Method. From analysis result, the corrosion of concrete structure with GGBFS begins 1.69~1.76 times later than that of concrete structure with ordinary portland cement.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.158-159
• /
• 2013

In this study, effects of supplementary cementitious materials(fly ash, blast furnace slag and waste glass) on drying shrinkage of cement mortar were compared and evaluated. The results showed drying shrinkage of cement mortar using blast furnace slag and waste glass is larger than shrinkage due to capillary pressure, while using fly ash is smaller.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.186-187
• /
• 2013

Recently, high fluidity concrete is becoming more prevalent. High fluidity concrete uses admixture or thickener in order to prevent separation of materials due to increased fluidity, and, especially, BS is becoming more use for reduced heat of hydration and improved long-term strength. This study examined the effect of BS on fluidity of cement paste from a rheological viewpoint. As for BS types, materials equivalent to 1 types of KS F 2563 and the cement mass was substituted by 20, 40, 60, 80%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.119-120
• /
• 2022

This study investigated the use of different amounts of BFS and POFA. In all mixture systems, 60% cement was replaced with POFA and BFS as a substitute for Ordinary Portland Cement. The results show that with the addition of POFA and BFS, although the early compressive strength will be reduced, the strength will be significantly improved at 28 days. In the ternary system, the 28-day strength is negatively correlated with increasing POFA content.

• 한국건축시공학회지
• /
• 제8권4호
• /
• pp.79-85
• /
• 2008

The purpose of this study is to evaluate the mix design of pH reducing cement concrete which can be used for environment-friendly concrete. Cement pastes and concretes are prepared with water-binder ratios and various admixtures such as blast-furnace slag, fly ash and recycled cement, and tested for compressive strength and pH. pH is measured through pore solution expressed from hydrated cement paste by special apparatus. From the test results, regardless of water-binder ratio, The pH of expressed pore solution from hydrated cement paste which is made of ordinary portland cement with blast-furnace slag, fly ash is decreased with increasing of admixtures content, and compressive strength is also slightly improved. The compressive strength of cement paste made of recycled cement which is burnt at $1000^{\circ}C$, for 2 hours is considerably increased compared with that of none-burnt recycled cement due to restoration of hydraulic property, but pH is a little higher. Porous concrete with ordinary portland cement has high pH in the range of 12.22 to 12.59, however, that is reduced to the range of 8.95 to 10.39 by carbonation at the surface of porous concrete. The pH reduction of porous concrete is possible by various admixture addition, however their degrees are very slight. Therefore, to reduce the pH considerably, carbonation method of porous concrete is better in pH reduction methods for plant survival condition of pH of 9.0 or less. In this study, it is apparent that pH for the environment-friendly porous concrete products used in the construction field can be suppressed by this carbonation method and various admixtures addition.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권5호
• /
• pp.117-124
• /
• 2017

${\alpha}$형 반수석고는 생산방법이 복잡하고, 대량 연속 생산이 곤란하며, 재료 단가가 높기 때문에 건설재료로써 활용범위가 크지 않았으나, 최근 화력발전소의 배연탈황석고를 활용하여 경제적으로 ${\alpha}$형 반수석고를 제조하는 기술이 실용화되고 있다. 이에 본 연구에서는 응결 시작 시간이 빠르고 재령 초기 팽창변형이 발생하는 ${\alpha}$형 반수석고의 특징에 주목하여, ${\alpha}$형 반수석고를 10, 20, 30 wt.% 치환한 보통포틀랜드시멘트 및 고로슬래그시멘트 모르타르를 제조한 후 응결 및 압축강도 특성, 건조수축을 검토하였다. 실험 결과, ${\alpha}$형 반수석고의 치환율이 증가할수록 보통포틀랜드시멘트 모르타르 및 고로슬래그시멘트 모르타르의 초결시간이 빨라지는 경향을 확인할 수 있었다. 또한, 보통포틀랜드시멘트 모르타르와 고로슬래그시멘트 모르타르 모두 ${\alpha}$형 반수석고의 치환율이 증가할수록 압축강도가 저하되는 경향을 보였으며, 보통포틀랜드 시멘트보다 고로슬래그시멘트에서 ${\alpha}$형 반수석고의 압축강도 발현이 유리한 것으로 나타났다. 한편, ${\alpha}$형 반수석고를 치환한 모르타르의 경우 ${\alpha}$형 반수석고의 혼입에 의해 생성된 에트링가이트 침상결정의 성장압에 의해 초기재령에서 수축변형이 저감되는 것을 확인할 수 있었으며, 초기 재령에서 수축변형의 억제 효과는 분명하지만, 재령이 지남에 따라 ${\alpha}$형 반수석고를 치환하지 않은 조건과 변형의 차이는 다시 감소하는 경향을 보였다. 따라서 ${\alpha}$형 반수석고를 모르타르에 적용할 경우 강도는 다소 저하하지만, 응결 촉진 및 수축변형 억제에 큰 효과가 있기 때문에 건설재료로써 활용 가치가 높을 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제90권5호
• /
• pp.467-480
• /
• 2024

The mechanical properties and durability of concrete pavements may be degraded in extreme situations, resulting in the need for partial repair or total replacement. During the past few decades, there has been a growing body of research on substituting a portion of Portland cement with alternative cementitious materials for improving concrete properties. In this study, two different configurations of powdered and granulated blast furnace slag were implemented, replacing fine aggregates (by 12 wt.%) and Portland cement (by 0, 20, 40, and 60 wt.%) in the making of roller-compacted concrete (RCC) mixes. The specimens were fabricated to investigate the mechanical properties and durability specifications, involving freeze-thaw, salt-scaling, and water absorption resistance. The experimental results indicated that the optimum mechanical properties of RCC mixes could be achieved when 20-40 wt.% of powdered slag was added to concrete mixes containing slag aggregates. Accordingly, the increases in compressive, tensile, and flexural strengths were 45, 50, and 28%, in comparison to the control specimen at the age of 90 days. Also, incorporating 60 wt.% of powdered slag gave rise to the optimum mix plan in terms of freeze-thaw resistance such that a negligible strength degradation was experienced after 300 cycles. In addition, the optimal moisture content of the proposed RCC mixtures was measured to be in the range of 5 to 6.56%. Furthermore, the partial addition of granulated slag was found to be more advantageous than using entirely natural sand in the improvement of the mechanical and durability characteristics of all mixture plans.