• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.353-354
• /
• 2009

시멘트 결합재로 널리 사용되어지고 있는 고로 수쇄 슬래그 분말을 각종 분쇄기를 사용하여 입도별로 분쇄하고, 이를 혼합하여 충전률과 유동특성을 비교 분석하였으며, 입도분포 또한 비교분석 하였다. 충전률과 유동특성은 비례의 경향이 크게 나타났고, 입도분포가 넓을수록 유동특성은 높았다.

• KIEAE Journal
• /
• 제12권3호
• /
• pp.115-122
• /
• 2012

Based on previous research and existing literature, this study examines the development of admixture, which increases the early concrete strength (1 and 3 day) by mixing blast furnace slag cement and concrete stimulant. The research on early strength development of concrete is necessary in dealing with the drawbacks of slow early strength concrete on site and to shorten the construction time. The study confirmed that when a high alkaline mortar mixture is mixed with blast furnace slag, the early strength of admixture exceeds that of ordinary portland cement (OPC). The use of calcium chloride ($CaCl_2$) promotes hydration of cement at low temperature and show similar strength as the blast furnace slag admixture. Although calcium chloride seems economically advantageous, it causes steel corrosion and its use in concrete should be further studied in-depth.

• 한국건축시공학회지
• /
• 제13권1호
• /
• pp.29-37
• /
• 2013

In this study, a zero-cement brick is manufactured by replacing cement with recycled aggregates and blast furnace slag powder. Experimental tests were conducted with standard sized samples of $190{\times}57{\times}90mm$ (KS F 4004), and this manufacturing technique was simulated in practice. Results showed that the zero-cement brick with 0.35 W/B had the highest compressive strength, but the lowest absorption ratio. This absorption ratio of zero-cement brick with 0.35 W/B was lower than the required level determined by KS F 4004. Hence, to increase the absorption ratio, crushed fine aggregate (CA) and emulsified waste vegetable oil (EWO) were used in combination in the zero-cement brick. It was found that the zero-cement brick with CA of 20% and EWO of 1% had the optimum combination, in terms of having the optimum strength development (12 MPa) and the optimum absorption ratio (8.4%) that satisfies the level required by KS. In addition, it is demonstrated that for the manufacturing of zero-cement brick of 1000, this technique reduces the manufacturing cost by 5% compared with conventional cement brick.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.126-127
• /
• 2013

For the decades, various of materials were used to instead of cement as the high volume CO₂ occurred during the process of cement manufacture. In this paper, incineration plant ash was used in the mortar which incorporating high volume of blast furnace slag. Water to binder ratio(W/B) is fixed as 50%,BS+RP's replacement ratio is fixed as 80%,and the replacement ratio of WA1 is range as 0,0.5,1,2,3,4,5%.For the fresh mortar, flow and chloride contents has been tested. For the hardened mortar, compressive strength at 3,7,28 days has been tested. the result shows that when the replacement ratio of WA1 is 0.5%,the chloride contents is less than 0,3 kg/m3,the flowability and strength also performed better than other replacement types of mortar.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.257-258
• /
• 2012

With regard to the carbon reduction that has become an international problem, we have examined the effects of compressive strength of the ground granulated blast-furnace slag mortar with the curing temperature. Also, we evaluated the mechanical properties of steel slag powder produced during the steelmaking process in order to examine the possibility as admixture.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.30-31
• /
• 2013

In this study, characteristics of the concrete replaced in large amount with blast furnace slag is analyzed by the microscopic analyses in the process of the mock-up testing to apply to the actual practice in the area of the general strength by activating a small amount of cement(25%) replaced in large amount of finely powered blast furnace slag.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.37-38
• /
• 2013

The fine powder obtained from the manufacturing process of recycled coarse aggregate contains unhydareted cement particles on their surface. It is believed that the alkalinity of the powder (11.0-12.5) is enough to active the slag-based composites. In this paper, the obtained powder was sieved and divided into two sizes, i.e., 0.08 mm and 0.3 mm, and added to the slag-based mortar. Results showed that the fine powder had an effect on the slump and the compressive strength of slag-based composites. With the different pH values of the powder, it could be seen that the distance between the two level powders. And found the peak 28 days compressive strength as the replacement ratio of the recycled aggregate powder changed. The findings from this study provide an indication that with achieved compressive strength, the fine powder can be used in a light weight concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.399-402
• /
• 2005

In ultra-high strength SFRCC(Steel Fiber Reinforced Cementious Composites), much silica fume are used to improve strength, flowability and durability. Silica fume have merits of filling the voids, enhancement of reheological chracteristics, production of secondary hydrates by pozzolanic reaction in reactive powder concretes. However silica fume has been imported in high-cost in domestic industry, we need to investigate replaceable material in stead of silica fume in a view of economy Therefore, in this paper, in order to investigate replacement of silica fume in ultra-high strength SFRCC we used the granulate blast-furnce slag with finess 4000, 6000, 8000. As a results, we have evaluated that the bigger the finess the more increase compressive strength of ultra-high strength SFRCC using the blast-furnce slag and there was no problem from the viewpoint of flowability and compressive strength when we use blast-furnce $50\%$ with replacement ratio of silica fume

• 한국지반신소재학회논문집
• /
• 제18권3호
• /
• pp.101-112
• /
• 2019

그라우팅 공법은 연약지반의 보강과 방수, 부등침하로 손상된 구조물의 지지력을 향상시킨다. 본 연구는 보강섬유와 고로슬래그 미분말을 이용하여 그라우트재의 압축강도와 차수를 향상시키는데 있다. 이와 관련하여 본 연구에서는 고로슬래그 미분말의 비율이 높은(50% 이상) 시료에 대해 일축압축시험을 수행하였다. Mpa또한 탄소섬유와 아라미드 섬유를 비교하기 위하여 0, 0.5, 1.0%로 증가시켜 실험하였다. 탄소섬유 및 아라미드 섬유 함유량이 증가함에 따라 일축압축강도가 증가하였고 이는 그라우트재 내에 섬유에 의한 가교작용이 일축압축강도를 증가시키는 경향을 확인하였다. 또한 아라미드 섬유로 보강된 그라우트재에서 탄소섬유로 보강된 그라우트재 보다 일축압축강도가 약 10%이상 증가된 것을 확인하였다.

• 한국건축시공학회지
• /
• 제13권4호
• /
• pp.351-359
• /
• 2013

고로슬래그는 콘크리트의 적용시 효율적인 가치향상과 관련하는 많은 장점도 있으나, 고로슬래그의 사용량 증대에 따른 부작용도 나타나고 있다. 따라서 고로슬래그 미분말의 활용성 증대를 위해 High Volume Slag를 자극제 종류별, 치환율별, 조강제 혼입율별, NaOH, $Na_2SiO_3$ 혼합사용시, 폐알칼리자극제 혼입율별 특성을 알아보기 위해 실험하였다. 실험결과, 압축강도의 경우 수산화나트륨을 제외한 모든 알칼리자극제에서 치환율이 증가함에 따라 강도가 증진되었다. 알칼리자극제 중 규산나트륨이 동탄성계수와 흡수율 등에서 높게 나타났으며, 조강제의 경우 혼입율 1.5%와 고로슬래그 치환율 75%가 높은 강도증진을 나타내었다. 폐알칼리 자극제의 경우 모든 실험에서 각기 다른 결과를 나타내었다.